Power Train. Review the 43 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Back Over Prevention. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Electrical System. Review the 17 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

9 crash reports0 fire reports12 injury reports

Latches/locks/linkages complaints

4 reports

Clear category filter

Mileage unknown · Jan 9, 2024

Latches/locks/linkagesUnknown Or Other

Rear power lift-gate sensor activates and causes lift-gate to close while reaching into of out of vehicle. Has occurred 20 + times.

NHTSA ODI #11564431

Mileage unknown · Apr 19, 2023

Latches/locks/linkagesUnknown Or Other

Read full complaint

Unintended Hands-Free Liftgate Activation: When standing next to or loading items into the rear cargo area the lift gate will begin to close on its own. On two occassions I have been hit on the head and also on my shoulder. No injuries were incurred. This is a random occurance. The issue has been reported to the Ford delership, McDonald Ford in Freeland MI, on several occasions. The most recent being April 13, 2023. The service advisor presented me with a Ford bulletin, SSM 51360, which states "This is a normal condition and repairs are not necessary." I feel that this is a safety issue, especially for seniors who may not be able to react as quickly as I did in order to avoid injury.

NHTSA ODI #11517815

Mileage unknown · Oct 25, 2022

Latches/locks/linkagesInjury

Read full complaint

The faulty back door lift and/or sensor resulted in the back door closing without activating the close button and it hit me in the head and shoulders several times while I put groceries in and/or removing them from the back area. I was unable to activate the foot sensor to open or close the back door when I purposely tried to open the back door using the foot sensor. After bringing the vehicle to the dealer for an oil change and informing them that this occurred 3 months after purchase, they informed me they did not have time to look at it and I had to make a different appointment. Also they stated they did not have any other concerns or complaints involving the back door closing without activating the close button. We live 4 hours away from the dealer and when I made the appointment to have it checked, that morning before leaving home, my husband went to help me pack afew items in the back and the door slammed so hard and hit him in the head causing a small laceration, headache and neck discomfort. At that point, the door did not stay open at all and slammed closed hard, with all the weight of the door. The dealer did not have the part and told me to be careful until fixed. I am afraid to use the back area now because it is hard for me to hold the door open to use the back. The door slams with such strong force that it could cause great bodily injury if you were caught there when the door slammed shut. The part was ordered the same day on 10/14/22 and I did not get an appointment until 11/2/22 to get it fixed. A great SAFETY concern especially if one had small children and this happened.

NHTSA ODI #11490889

Mileage unknown · Sep 22, 2022

Electrical SystemLatches/locks/linkagesInjury

Read full complaint

The contact rented a 2022 Ford Edge. The contact stated while moving items out of the trunk of the vehicle with the rear door elevated, the rear door inadvertently dropped and hit her on the face. The contact sustained a laceration under her left eye. Additionally, the contact sustained headache, neck ache and emotional stress as the incident occurred while assisting her younger daughter to move to College. The contact sought medical assistance. The vehicle was returned to Hertz rental company. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was unknown.

NHTSA ODI #11485911

Official recalls

26V124000 · Back Over Prevention:software

Mar 3, 2026

Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.

Consequence & remedy

Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.

25V315000 · Back Over Prevention:software

May 9, 2025

Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.

Consequence & remedy

Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.

25V160000 · Back Over Prevention:software

Mar 14, 2025

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence & remedy

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.

24V635000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical

Aug 23, 2024

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.

Consequence & remedy

Consequence: A loss of drive power increases the risk of a crash.

Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.

22V151000 · Back Over Prevention:display Function; Back Over Prevention:software

Mar 11, 2022

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence & remedy

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.

Additional source detail variants (2)

Back Over Prevention:display Function

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.

Back Over Prevention:software

Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.

Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

EA23002 · Loss Of Motive Power

Opened Sep 29, 2023 · Closed Oct 31, 2024

Status: closed (inferred from source dates) · Engine

On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family. If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.