IllustrationShuddering and jerking from 20-40 mph. Dealer reports torque converter and planetary gear problems requiring expensive repairs or replacement of the transmission.
2022 Ford Edge
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2022 Ford Edge do not stand out strongly from the model-year median of 724.
About this comparison →How this year compares
Owner complaints by model year
Compare all Edge years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
110–25K
425–50K
1050–75K
675–100K
2100–150K
1150K+
34 reports with mileage · 95 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Power Train. Review the 43 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Back Over Prevention. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 17 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
9 crash reports0 fire reports12 injury reports
What owners actually said
129 reportsThe contact owns a 2022 Ford Edge. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed, however the vehicle failed to accelerate as intended. The vehicle jerked, and the transmission independently shifted into park(P). In addition, an unknown warning light was illuminated. The vehicle wa…
Read full complaint
The contact owns a 2022 Ford Edge. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed, however the vehicle failed to accelerate as intended. The vehicle jerked, and the transmission independently shifted into park(P). In addition, an unknown warning light was illuminated. The vehicle was towed to an independent mechanic, where it was diagnosed with a failed transmission. The contact was informed that the transmission needed to be replaced. The vehicle was in the process of being repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 103,000.
My 2022 Ford Edge Titanium (equipped with the 8F35 transmission) is exhibiting severe shuddering, jerking, harsh shifting, lurching, and hesitation. I just received the $8,500 cost estimate to rebuild the transmission on my car that is only 3 years old due to the torque converter failure. These faulty Ford Motor Co transmission…
Read full complaint
My 2022 Ford Edge Titanium (equipped with the 8F35 transmission) is exhibiting severe shuddering, jerking, harsh shifting, lurching, and hesitation. I just received the $8,500 cost estimate to rebuild the transmission on my car that is only 3 years old due to the torque converter failure. These faulty Ford Motor Co transmissions are on back-order due to so many failures across the country. This high out-of-pocket repair cost count is HALF of the money I still currently owe on this vehicle. It is available for inspection if someone comes to inspect it within the next couple of weeks because I have no choice but to have it repaired. I am a nurse who has a job to get to on a daily basis. It causes severe shuddering, harsh shifting, and sudden loss of power when I am traveling and trying to accelerate in traffic or cross dangerous intersections. It has been thoroughly inspected by a certified transmission mechanic who is very well versed on this same particular issue with all of these particular Ford Edge transmissions that enter his shop on a daily, weekly, monthly, and yearly basis. Their were no warning lamps, messages, and no other symptoms of the problem prior to the failure. The issues first starting appearing around a year after purchasing the car, so probably around XXX. I purchased the car from a Ford dealership in [XXX] on XXX. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2022 Ford Edge. The contact stated that after purchasing the vehicle, she was notified of an unknown recall requiring a software update. The software update was completed. The contact stated that while driving on several occasions at various speeds, the infotainment screen went black, and the contact was unabl…
Read full complaint
The contact owns a 2022 Ford Edge. The contact stated that after purchasing the vehicle, she was notified of an unknown recall requiring a software update. The software update was completed. The contact stated that while driving on several occasions at various speeds, the infotainment screen went black, and the contact was unable to access the heat, A/C, or the radio. The contact stated that when the vehicle was started, the driver's side seat warmer independently activated. The vehicle was taken to a dealer, and a mechanic from the dealer arrived at the residence. The vehicle was diagnosed, and it was determined that a software update was needed. The vehicle was repaired, but the failure persisted. The manufacturer was notified of the failure. The failure mileage was approximately 10,000.
The contact owns a 2022 Ford Edge. The contact stated that while starting the vehicle, the check engine warning light illuminated, and the vehicle jerked abnormally. The vehicle was taken to an independent mechanic, who determined that the transmission needed additional diagnostic tests by the dealer. The vehicle was not repaire…
Read full complaint
The contact owns a 2022 Ford Edge. The contact stated that while starting the vehicle, the check engine warning light illuminated, and the vehicle jerked abnormally. The vehicle was taken to an independent mechanic, who determined that the transmission needed additional diagnostic tests by the dealer. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown.
My torque converter is malfunctioning, there are no warning lights, and my car only started driving differently very recently in the past couple of weeks. According to the Ford mechanic my car has been throwing error codes since early May. The dealership was able to confirm that this happens, and that my torque converter needs t…
Read full complaint
My torque converter is malfunctioning, there are no warning lights, and my car only started driving differently very recently in the past couple of weeks. According to the Ford mechanic my car has been throwing error codes since early May. The dealership was able to confirm that this happens, and that my torque converter needs to be replaced. My car is only four years old and only has 75,000 miles on it. Ford refuses to do anything to help with this almost $8000 repair. They also issued a recall for the backup camera, update was pushed to my car that was supposed to correct it, my backup camera now goes black frequently when I am reversing.
The motorized track assembly separated from the moonroof interior sunshade on my 2022 Ford Edge, leaving the sunshade drooping down in the passenger compartment. While my vehicle is just out of the standard bumper to bumper warranty period, I feel Ford Motor Company should issue a repair recall to all affected owners to fix this…
Read full complaint
The motorized track assembly separated from the moonroof interior sunshade on my 2022 Ford Edge, leaving the sunshade drooping down in the passenger compartment. While my vehicle is just out of the standard bumper to bumper warranty period, I feel Ford Motor Company should issue a repair recall to all affected owners to fix this issue.
The vehicle jerks while changing from 1st to 2nd shaking the engine. I have had 2 transmission flushes which help for a moment then it behave the same way jerking while shifting gears. The vehicle asks like it does not want accelerate at times while shifting gears as well
When in drive , going in to park, as soon as you turn dial, it jumps to park, so no neutral or reverse capability. And pops a code of Shift system fault.
They did an update and my back up camera stoped working
Official recalls
526V124000 · Back Over Prevention:software
Mar 3, 2026
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence & remedy
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
25V315000 · Back Over Prevention:software
May 9, 2025
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence & remedy
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
25V160000 · Back Over Prevention:software
Mar 14, 2025
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles previously repaired incorrectly under recall number 22V-151. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed April 25, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S28.
24V635000 · Engine And Engine Cooling:engine:hard Parts Internal/mechanical
Aug 23, 2024
Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
22V151000 · Back Over Prevention:display Function; Back Over Prevention:software
Mar 11, 2022
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence & remedy
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Additional source detail variants (2)
Back Over Prevention:display Function
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Back Over Prevention:software
Ford Motor Company (Ford) is recalling certain 2021-2022 Edge vehicles. A software error may cause the rearview camera to display a blank or distorted image when the vehicle is in reverse.
Consequence: A rearview camera that displays a blank or distorted image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: The rearview camera software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on April 29, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S14.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA23002 · Loss Of Motive Power
Opened Sep 29, 2023 · Closed Oct 31, 2024
Status: closed (inferred from source dates) · Engine
On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family. If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.