2018 Ford Edge

Computer error P0304 - misfiring in cylinder 4. Diagnosed with a coolant leak into the cylinder. Potential Safety Issues: Loss of Power: A misfire can cause sudden power loss, particularly during acceleration or at high speeds, increasing the risk of accidents, especially in traffic or on highways. Engine Stalling: If the misfire worsens, the engine may stall, leaving you unable to control the vehicle, which is dangerous in busy areas or intersections. Overheating Risk: Coolant intrusion into cylinder 4 (as noted in TSB 22-2229) can lead to overheating if the cooling system is compromised, potentially causing engine failure or fire hazards. Catalytic Converter Damage: Persistent misfires can overheat and damage the catalytic converter, potentially leading to a fire risk under the vehicle. Beyond this, it is my 17 year old daughter driving this car and she could be stranded some place unsafe due to not starting or in the middle of traffic while driving. It has been inspected by a mechanic to confirm the leak. Ford's issuing of a TSB on this issue (TSB 22-2229) - calls for a new engine. Ford knows they have made faulty engines in these cars and refuses to help cover the cost of replacement.

The contact owned a 2018 Ford Edge. The contact stated that the vehicle was turned on and parked on a level ground surface while the contact was outside of the vehicle. The contact stated that the vehicle reversed independently, drove over the curb, hit the apartment complex fence, went down the alley, and hit a neighbor's fence. The contact stated that the vehicle was driven away from the scene and was parked. Additionally, the contact stated that while driving 20 MPH and depressing the brake pedal, the brake pedal was stiff, and the vehicle failed to respond and crashed into the rear of another vehicle. There was no warning light illuminated. The air bags did not deploy. The vehicle was parked near the scene, in a business parking lot. The contact sustained pain from the seat belt strap and received medical assistance. The other driver sustained unknown injuries. A police report was not filed. The vehicle was towed to the collision center, which provided an estimate of the damage. The vehicle was totaled by the insurance company. The dealer was notified of the failure. The manufacturer was notified of the failure and referred the contact to the insurance company for the brake diagnostic testing. The failure mileage was 8,200.

The contact owns a 2018 Ford Edge. The contact stated that the power train, wrench, and check engine warning lights were illuminated. The contact stated that the transmission was slipping once the transmission was in 5th gear. The contact stated that while the warning lights were illuminated, the vehicle hesitated before accelerating, and the vehicle was struggling to drive forward. The vehicle was taken to the dealer and was diagnosed and determined that the torque converter had failed and needed to be replaced. The vehicle was not repaired. The clutch was repaired, but not the torque converter. The contact became aware of NHTSA Campaign 18V390000 ( Power Train); however, the VIN was not included. The manufacturer was made aware of the failure. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 118,890.

I am filing a formal complaint regarding a potential failed or insufficient recall repair related to NHTSA Recall 22V413 / Ford Recall 22S43 on my 2018 Ford Edge (VIN: [XXX] ). Ford replaced the shift cable bushing in Sept 2022. Within months, I experienced symptoms consistent with the original defect, including gear engagement issues, especially on inclines. One day, after shifting into reverse in a parking lot, the car rolled forward. I had to slam the brakes to avoid hitting another vehicle and feather the gas to reverse. These issues continued. Despite multiple service visits and reporting concerns, the dealership failed to document the problem. In Sept and Nov 2024, I again contacted the dealer. On Dec 18, 2024, they finally provided a loaner and inspected the vehicle. A full teardown revealed internal damage: metal debris in the solenoid body, worn sun gears, and failed clutch components—consistent with long-term gear misalignment. Ford has offered partial financial help but refuses to cover the full cost, leaving me with over $1,300 out-of-pocket despite raising concerns during the warranty window. As of June 16, 2025, the vehicle is still disassembled and remains in the dealership’s service bay with no firm repair date. I have been without my personal vehicle for six months. I respectfully request NHTSA to: Investigate whether recall 22V413 repairs are failing prematurely or inadequately prevent long-term damage. Assess whether further manufacturer responsibility is warranted for failures linked to this recall. Encourage Ford to fully cover repair costs under an extended remedy. Consider requiring a recall performance audit or extended warranty for affected vehicles. Thank you for reviewing this safety matter. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My engine light came on about a year ago, then went off rather quickly. This happened again about 6 months ago. At this time I connected a reader and learned that it was due to a cylinder 2 misfire. All coil packs and spark plugs were replaced thinking that would solve the problem. After it did not, I begin to search online and learned about the infamous coolant intrusion issue with my model vehicle . After reading multiple message boards regarding the issue, which appears to be directly tied to the motor design and which is very common, I confirmed that my vehicle is showing the same signs of others who have reported the issue. The last straw was when the car lost power and shut off of me in the middle of a crowded gas station parking lot where I had to sit and wait for a tow truck all while impeding traffic. At this point I am outside of my extended warranty and the only solution is a new motor at the cost of $8k. It is baffling that Ford is not being held responsible for this issue when it is so common and directly tied to the design of their motor. I am currently not able to drive a car that I am still paying a monthly payment for due to the manufacturer’s design flaw. A recall for this is well overdue and I ask you to do something about this expeditiously. Thanks.

The contact owns a 2018 Ford Edge. The contact stated while driving at an undisclosed speed, the vehicle unexpectedly jerked with the check engine warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that there were metal shavings inside the torque converter, which caused the transmission to fail. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 79,000.

Vehicle began to rough idle, and then while driving the vehicle MIL came on, as well as a "Engine overheat throttle limited" error. Pulled over and vehicle would not move. Tried to power cycle the vehicle and would not start back up. Had it towed to dealer and was told this was the long block coolant intrusion problem that leader to my engine completely failing. I was made aware of Ford TSB 19-2346, and told the repairs would be $9200. After googling around, this is a common problem on these 2018 ford ecoboost engines and Ford obviously knows there is a problem that could cause accidents or engine fires. Luckily my kids were not in the car, otherwise this could have been catastrophic due to the loss of power while driving. I called Ford support and they told me that Ford has no programs to help affected customers. There should be a Recall and Ford should be forced to replace or repair affected engines as this will get someone killed if they lose power or have an engine fire while driving.