2012 BMW 535I

BMW N63 Engine Powertrain Issues 2012 535i The N63 engine, utilized in various BMW models including the 2012 535i, has been subject to multiple customer complaints regarding premature timing chain wear and other powertrain-related issues. This led BMW to introduce a "Customer Care Package," detailed in Technical Service Bulletin (TSB) B110614, to address the concerns reported by multiple owners and noted by the National Highway Traffic Safety Administration (NHTSA) under ID Number 11016414. A primary cause of the issue is accelerated timing chain wear. The N63 engine's design features timing chains that are prone to stretching prematurely. This stretching can disrupt the precise timing of the engine's valves, leading to a cascade of problems. As a consequence, owners have reported a variety of symptoms, including the illumination of the "drivetrain malfunction" warning light, noticeable engine noise, excessive vibration, and potentially catastrophic engine failure. The "drivetrain malfunction" message, in particular, is a frequently cited indicator of this underlying powertrain problem. To address these widely reported issues, the N63 Customer Care Package was implemented. This service bulletin instructs authorized BMW technicians to perform a series of diagnostic tests. The main objective is to detect if the timing chains have stretched beyond acceptable tolerances. If excessive wear is confirmed, the TSB provides a detailed procedure for the necessary repairs. This often involves replacing the timing chains and related components to restore proper engine function. Beyond the core timing chain replacement, the Customer Care Package also includes several proactive and preventative measures. Technicians are instructed to check and potentially replace other components, such as fuel injectors and boost solenoids, which may have been impacted or contributed to the engine's performance issues. Furthermore, the service includes reprogramming the vehicle's software

The contact owns a 2012 BMW 535I. The contact stated while driving at approximately 65 MPH, the engine temperature and "Pull Over - Stop Vehicle" warning lights were illuminated. The contact pulled over and let the vehicle cool down and drove to an independent mechanic. The vehicle was diagnosed, and it was determined that the water pump needed to be replaced. The mechanic advised the contact that there was an active recall, NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 127,000.

The contact owns a 2012 BMW 535I. The contact stated while driving approximately 50–55 MPH, the engine overheated and the vehicle shutoff. The engine warning light was illuminated. The vehicle was restarted. The contact continued to drive to her residence. The contact stated that the failure was related to NHTSA Campaign Number: 16V746000 (Fuel System, Gasoline). The vehicle was towed to an independent mechanic, who determined that the failure was due to the fuel pump and the water pump. The water pump and fuel pump were replaced. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 119,000. The VIN was not available.

Confirmed by a Certified BMW repair center. Failure of Vanos Camshaft Gear Bolts. Recall has been issued for all 5 series models (and beyond) up to 2011, but does not include 2012 (5 series,) as it should. The Recall needs to be extended to include 2012 - 5 series models as failure of these bolts will cause immediate engine failure and could result in catastrophic crash, especially if driving at high speeds. I have contacted BMW of North America and they will not extend the recall until formal complaints, such as this, are received. My Issue with the Vanos Camshaft Bolts is currently being repaired (out of pocket) and I will share my invoice once received.

The headlights on the BMW 535 collect excessive amounts of condensation. If the condensation builds up, then the light does not function properly. The main safety concern is the malfunction of the turn signal. It will function in the rear of the vehicle but does not light up on the front in the affected headlight housing. Review of this problem on-line shows that this has occurred in many BMW vehicles and BMW also has issued a service bulletin for this problem (SI B63 05 16). As widespread as this problem is, I would think there would be a required recall for this service.