IllustrationTHE ENGINE LIGHT DOESN'T TURN OFF AND THE COMPUTER SAYS ELECTRONICAL REASON . THE SPEED IS LOW
2015 Nissan Versa
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2015 Nissan Versa do not stand out strongly from the model-year median of 95.
About this comparison →How this year compares
Owner complaints by model year
Compare all Versa years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
380–25K
3025–50K
2850–75K
1875–100K
8100–150K
1150K+
123 reports with mileage · 45 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Power Train. Review the 47 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 26 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 25 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
18 crash reports2 fire reports14 injury reports
Suspension complaints
7 reportsWHEN DRIVING ON HIGHWAY AT ABOUT 60 MPH CAR FEELS VERY OUT OF CONTROL LIKE IF ITS ON ROLLER SKATES, FEELS LIKE CAR IS GOING TO SWAY THIS WAY OR THAT WAY. VERY UNSAFE FEELING. VERY SCARY.
THE CHECK ENGINE LIGHT COMES ON AND THE CODES COME UP SAYING IT'S THE SPEED SENSOR THE ABS LIGHT COMES ON THE CAR USER BRAKE FLUID TOO MUCH THE SHOCK ON PASSAGES SIDE IS TOTALLY OUT IT WAS DRIVING
12/5/2018 I REPLACED THE TRANSMISSION ON THE NISSAN VERSA 2015 AT 37,000 MILES. 2 MONTHS AT 42,000 MILES LATER CAR MAKING NOISE NOT KNOWING WHAT IT IS, AFTER MANY CAR CHECKS WITH AUTO MECHANICS. ON SEPTEMBER 2019 AT 93,000 MILES I RECEIVED A POST CARD ABOUT A CLASS ACTION LAWSUIT FILED BY NISSAN OWNERS AGAINST 2013-2017 NISSAN…
Read full complaint
12/5/2018 I REPLACED THE TRANSMISSION ON THE NISSAN VERSA 2015 AT 37,000 MILES. 2 MONTHS AT 42,000 MILES LATER CAR MAKING NOISE NOT KNOWING WHAT IT IS, AFTER MANY CAR CHECKS WITH AUTO MECHANICS. ON SEPTEMBER 2019 AT 93,000 MILES I RECEIVED A POST CARD ABOUT A CLASS ACTION LAWSUIT FILED BY NISSAN OWNERS AGAINST 2013-2017 NISSAN VERSA AND SENTRA CARS ''CVT' TRANSMISSIONS NOT PROPERLY WORKING TO NOT WORKING AT ALL. I FINALLY HAD THE CAR CHECKED AND THE NISSAN ONLY MECHANIC SAID MY 2015 NISSAN VERSA IS NOT SAFE TO DRIVE DUE TO THE TRANSMISSION NOT WORKING PROPERLY AND IT NEEDS TO BE REPLACED FOR A THIRD TIME AT MOSSY NISSAN HOUSTON, TX. ITS EXTREMELY NOT FAIR. NISSAN MANUFACTURE FAIL TO PROVIDE 100% OF REPAIR COST AND REFUSE TO TAKE FULL RESPONSIBILITY OF THE PAIN AND SUFFERING THEIR TERRIBLE CAR TRANSMISSION CAUSE ME. MANY PEOPLE AND TRANSMISSION REPAIR SHOPS KNOWS NISSAN TRANSMISSIONS ARE NOT GOOD. YOU CAN REPLACE A NISSAN TRANSMISSION TODAY AND THE SAME YEAR OR NEXT YEAR YOU HAVE TO REPLACE THE TRANSMISSION AGAIN. ITS EXTREMELY NOT FAIR WHAT NISSAN MANUFACTURER & DEALERSHIP DID. II REPLACED THE FIRST TRANSMISSION AT 37,000 MILES IN YEAR 2 OF OWNING MY CAR , AT 42,000 OR 50,000 MILES THE TRANSMISSION STARTS GOING BAD. AND YEAR 3 AT 93,000 I HAVE TO REPLACED AGAIN. THAT IS A MAJOR HIGHWAY SAFETY HAZARD. THE REASON I DID NOT HAVE A MAJOR ACCIDENT WITH THIS CAR I STRONGLY BELIEVE, IS BECAUSE I PRAYED EVERYDAY WHEN I START DRIVING FOR JEHOVAH GOD TO PROTECT ME, NOT TO HAVE AN ACCIDENT, AND NOT TO KILL ANYONE WITH THIS CAR. SO EVERY 30,000 MILES OR EVERY YEAR YOU HAVE TO REPLACE THE TRANSMISSION ON A NISSAN VERSA DEPENDING HOW MUCH YOU DRIVE FOR THE YEAR.. I HAD TO DEAL WITH EXTREME STRESS BEEN IN THE HOSPITAL 3 TIMES. PLEASE MAKE MONEY GREEDY NISSAN PAY FOR THEIR DELIBERATE FRAUD ACT. I DON'T DRIVE THE CAR BECAUSE ITS UNSAFE TO DRIVE WITH A VERY BAD TRANSMISSION.
THE ABS LIGHT AND THE TRACTION CONTROL LIGHT CONTINUOUSLY ILLUMINATE BUT GO ON AND OFF DURING CAR RIDES. THE CAR IS ALSO MAKING A STRANGE RATTLING NOISE UNDER THE HOOD BECAUSE THE IDLER PULLEY SYSTEM IS FAILING. THIS NOSE PERSISTS WHILE THE CAR IS STATIONARY, IN MOTION, AND TURNING ON ANY ROAD CONDITION. THE CAR ALSO IS HAVING A…
Read full complaint
THE ABS LIGHT AND THE TRACTION CONTROL LIGHT CONTINUOUSLY ILLUMINATE BUT GO ON AND OFF DURING CAR RIDES. THE CAR IS ALSO MAKING A STRANGE RATTLING NOISE UNDER THE HOOD BECAUSE THE IDLER PULLEY SYSTEM IS FAILING. THIS NOSE PERSISTS WHILE THE CAR IS STATIONARY, IN MOTION, AND TURNING ON ANY ROAD CONDITION. THE CAR ALSO IS HAVING A JERKING MOTION WHEN TRYING TO ACCELERATE AND IS SLOW TO PICK UP SPEED. THE CAR IS HESITATING WHEN PICKING UP SPEED.
STARTING HEARING A RATTLING. AFTER FURTHER LOOKING IT WAS DISCOVERED THAT ON THE FRONT DRIVER'S SIDE OF THE VEHICLE NEAR THE TIRE WHEEL AND UNDER THE HOOD ALL BUT TWO OF THE RIVETS ARE GONE. THE PLASTIC PIECE OVER THE WHEEL WELL IS ALSO SCRUBBING THE TIRE.
WHEN DRIVING THE CAR AT HIGHWAY SPEEDS 65MPH AND OVER THE CAR SHIFTS RIGHT AND LEFT AS IF WIND IS BLOWING THE CAR ON BOTH SIDES. THE CAR IS BRAND NEW AND WAS PURCHASED WITH 10 MILES ON THE ODOMETER IN MAY OF 2015. THE DEALERSHIP ACKNOWLEDGED THIS PROBLEM AND NISSAN WAS CONTACTED BY ME AT THE REQUEST OF THE DEALERSHIP. NISSAN HAS…
Read full complaint
WHEN DRIVING THE CAR AT HIGHWAY SPEEDS 65MPH AND OVER THE CAR SHIFTS RIGHT AND LEFT AS IF WIND IS BLOWING THE CAR ON BOTH SIDES. THE CAR IS BRAND NEW AND WAS PURCHASED WITH 10 MILES ON THE ODOMETER IN MAY OF 2015. THE DEALERSHIP ACKNOWLEDGED THIS PROBLEM AND NISSAN WAS CONTACTED BY ME AT THE REQUEST OF THE DEALERSHIP. NISSAN HAS INFORMED ME THAT THE PROBLEMS IS A NORMAL CONDITION FOR THIS MODEL AND THEREFORE NO FIX OR SOLUTION IS AVAILABLE. THE MAIN CONCERN IS THAT WHEN DRIVING AT OVER 65 MILES PER HOUR YOU HAVE TO FIGHT THE STEERING TO COMPENSATE FOR THE SHIFTING. THE SERVICE MANAGER AT SPARKS/NISSAN IN MONROE LOUISIANA STATES THAT THE MODEL IS A NORMAL SITUATION. IF THIS IS TRUE THEN WHY HAS THE SALES STAFF NOT INFORMED THE CUSTOMERS THAT A SITUATION COULD EXIST? THE CAR SHOULD BE DEEMED A SAFETY HAZARD AT HIGHWAY SPEEDS AS UNDER NORMAL CITY LOW SPEED DRIVING THE CONDITION IS NOT NOTICED. NISSAN CORPORATION 615-7257445 WILL DO NOTHING, MY CASE #2035821 COMPLAINT. I AM ASKING FOR A REPURCHASE BY NISSAN TO THE DEALERSHIP IN HOPES OF BUYING A CAR DEEMED TO BE SAFE. THE PROBLEM WAS NOTICED ON A LONG TRIP FROM LOUISIANA TO FLORIDA AND BACK IN SEPTEMBER.
Official recalls
115V507000 · Service Brakes, Hydraulic:pedals And Linkages; Vehicle Speed Control:accelerator Pedal
Aug 12, 2015
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2015 Nissan Versa sedan vehicles manufactured June 9, 2011, to March 11, 2015, and 2014-2015 Nissan Versa Note vehicles manufactured April 23, 2013, to March 11, 2015. The affected vehicles have a center console trim panel that may catch the driver's shoe and delay the transition from the accelerator pedal to the brake pedal.
Consequence & remedy
Consequence: A delay in the application of the brake pedal would lengthen the distance needed to stop the vehicle and increase the risk of a crash.
Remedy: Nissan will notify owners, and dealers will modify the console trim panel, free of charge. The recall began on September 14, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Additional source detail variants (2)
Vehicle Speed Control:accelerator Pedal
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2015 Nissan Versa sedan vehicles manufactured June 9, 2011, to March 11, 2015, and 2014-2015 Nissan Versa Note vehicles manufactured April 23, 2013, to March 11, 2015. The affected vehicles have a center console trim panel that may catch the driver's shoe and delay the transition from the accelerator pedal to the brake pedal.
Consequence: A delay in the application of the brake pedal would lengthen the distance needed to stop the vehicle and increase the risk of a crash.
Remedy: Nissan will notify owners, and dealers will modify the console trim panel, free of charge. The recall began on September 14, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Service Brakes, Hydraulic:pedals And Linkages
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2015 Nissan Versa sedan vehicles manufactured June 9, 2011, to March 11, 2015, and 2014-2015 Nissan Versa Note vehicles manufactured April 23, 2013, to March 11, 2015. The affected vehicles have a center console trim panel that may catch the driver's shoe and delay the transition from the accelerator pedal to the brake pedal.
Consequence: A delay in the application of the brake pedal would lengthen the distance needed to stop the vehicle and increase the risk of a crash.
Remedy: Nissan will notify owners, and dealers will modify the console trim panel, free of charge. The recall began on September 14, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA15003 · Pedal Operation Interference
Opened Apr 1, 2015 · Closed Sep 1, 2015
Status: closed (inferred from source dates) · Service Brakes, Hydraulic; Service Brakes, Hydraulic:pedals And Linkages; Vehicle Speed Control:accelerator Pedal
On August 11, 2015, Nissan North America, Inc., submitted a Defect Information Report (DIR) describing a condition that may impede the driver's ability to transition quickly and smoothly from the accelerator pedal to the brake pedal in certain model year (MY) 2012 through 2015 Nissan Versa Sedans and MY 2014 through 2015 Nissan Versa Note vehicles (NHTSA Recall No. 15V-507).According to Nissan's DIR, in certain circumstances related to driver foot position and shoe type, the right edge of the driver?s shoe may catch the edge of the center console lower trim panel.Nissan indicated that this condition could cause a slight delay in the smooth transition between the accelerator pedal and the brake pedal which may increase the braking distance; therefore increasing the risk of a crash.Nissan's recall instructs dealers to trim the console panel so that the leading edge is at a greater distance from the driver?s foot.Nissan had previously issued a service campaign (Nissan Campaign ID #P5308; TSB #NTB15-033) on April 16, 2015, to provide the remedy for the same set of vehicles before deciding to change the program to a safety recall.Of the approximately 421,305 vehicles covered by recall 15V-507, approximately 122,558 have already been repaired under the service campaign. ODI's investigation also examined allegations that an HVAC duct in the driver's footwell area may interfere with the driver's right foot in certain circumstances.ODI's analysis of all complaints related to foot obstructions in the subject vehicles identified 45 complaints, 7 crashes and 1 minor soft tissue injury.Thirty-five (35) of the complaints, all 7 crashes and the only injury were caused by the trim panel condition which is the subject of the recall.ODI will continue to monitor complaints related to the HVAC duct condition.This investigation is closed based on Nissan's recall.The VOQs associated with the closing of this investigation are: 10725339, 10723544, 10711794, 10691631, 10649259, 10640644, 10629161, 10614957, 10610356, 10606832, 10606766, 10606670, 10597004, 10573057, 10503811, and 10498000.
Additional source detail variants (3)
Service Brakes, Hydraulic
On August 11, 2015, Nissan North America, Inc., submitted a Defect Information Report (DIR) describing a condition that may impede the driver's ability to transition quickly and smoothly from the accelerator pedal to the brake pedal in certain model year (MY) 2012 through 2015 Nissan Versa Sedans and MY 2014 through 2015 Nissan Versa Note vehicles (NHTSA Recall No. 15V-507).According to Nissan's DIR, in certain circumstances related to driver foot position and shoe type, the right edge of the driver?s shoe may catch the edge of the center console lower trim panel.Nissan indicated that this condition could cause a slight delay in the smooth transition between the accelerator pedal and the brake pedal which may increase the braking distance; therefore increasing the risk of a crash.Nissan's recall instructs dealers to trim the console panel so that the leading edge is at a greater distance from the driver?s foot.Nissan had previously issued a service campaign (Nissan Campaign ID #P5308; TSB #NTB15-033) on April 16, 2015, to provide the remedy for the same set of vehicles before deciding to change the program to a safety recall.Of the approximately 421,305 vehicles covered by recall 15V-507, approximately 122,558 have already been repaired under the service campaign. ODI's investigation also examined allegations that an HVAC duct in the driver's footwell area may interfere with the driver's right foot in certain circumstances.ODI's analysis of all complaints related to foot obstructions in the subject vehicles identified 45 complaints, 7 crashes and 1 minor soft tissue injury.Thirty-five (35) of the complaints, all 7 crashes and the only injury were caused by the trim panel condition which is the subject of the recall.ODI will continue to monitor complaints related to the HVAC duct condition.This investigation is closed based on Nissan's recall.The VOQs associated with the closing of this investigation are: 10725339, 10723544, 10711794, 10691631, 10649259, 10640644, 10629161, 10614957, 10610356, 10606832, 10606766, 10606670, 10597004, 10573057, 10503811, and 10498000.
Service Brakes, Hydraulic:pedals And Linkages
On August 11, 2015, Nissan North America, Inc., submitted a Defect Information Report (DIR) describing a condition that may impede the driver's ability to transition quickly and smoothly from the accelerator pedal to the brake pedal in certain model year (MY) 2012 through 2015 Nissan Versa Sedans and MY 2014 through 2015 Nissan Versa Note vehicles (NHTSA Recall No. 15V-507).According to Nissan's DIR, in certain circumstances related to driver foot position and shoe type, the right edge of the driver?s shoe may catch the edge of the center console lower trim panel.Nissan indicated that this condition could cause a slight delay in the smooth transition between the accelerator pedal and the brake pedal which may increase the braking distance; therefore increasing the risk of a crash.Nissan's recall instructs dealers to trim the console panel so that the leading edge is at a greater distance from the driver?s foot.Nissan had previously issued a service campaign (Nissan Campaign ID #P5308; TSB #NTB15-033) on April 16, 2015, to provide the remedy for the same set of vehicles before deciding to change the program to a safety recall.Of the approximately 421,305 vehicles covered by recall 15V-507, approximately 122,558 have already been repaired under the service campaign. ODI's investigation also examined allegations that an HVAC duct in the driver's footwell area may interfere with the driver's right foot in certain circumstances.ODI's analysis of all complaints related to foot obstructions in the subject vehicles identified 45 complaints, 7 crashes and 1 minor soft tissue injury.Thirty-five (35) of the complaints, all 7 crashes and the only injury were caused by the trim panel condition which is the subject of the recall.ODI will continue to monitor complaints related to the HVAC duct condition.This investigation is closed based on Nissan's recall.The VOQs associated with the closing of this investigation are: 10725339, 10723544, 10711794, 10691631, 10649259, 10640644, 10629161, 10614957, 10610356, 10606832, 10606766, 10606670, 10597004, 10573057, 10503811, and 10498000.
Vehicle Speed Control:accelerator Pedal
On August 11, 2015, Nissan North America, Inc., submitted a Defect Information Report (DIR) describing a condition that may impede the driver's ability to transition quickly and smoothly from the accelerator pedal to the brake pedal in certain model year (MY) 2012 through 2015 Nissan Versa Sedans and MY 2014 through 2015 Nissan Versa Note vehicles (NHTSA Recall No. 15V-507).According to Nissan's DIR, in certain circumstances related to driver foot position and shoe type, the right edge of the driver?s shoe may catch the edge of the center console lower trim panel.Nissan indicated that this condition could cause a slight delay in the smooth transition between the accelerator pedal and the brake pedal which may increase the braking distance; therefore increasing the risk of a crash.Nissan's recall instructs dealers to trim the console panel so that the leading edge is at a greater distance from the driver?s foot.Nissan had previously issued a service campaign (Nissan Campaign ID #P5308; TSB #NTB15-033) on April 16, 2015, to provide the remedy for the same set of vehicles before deciding to change the program to a safety recall.Of the approximately 421,305 vehicles covered by recall 15V-507, approximately 122,558 have already been repaired under the service campaign. ODI's investigation also examined allegations that an HVAC duct in the driver's footwell area may interfere with the driver's right foot in certain circumstances.ODI's analysis of all complaints related to foot obstructions in the subject vehicles identified 45 complaints, 7 crashes and 1 minor soft tissue injury.Thirty-five (35) of the complaints, all 7 crashes and the only injury were caused by the trim panel condition which is the subject of the recall.ODI will continue to monitor complaints related to the HVAC duct condition.This investigation is closed based on Nissan's recall.The VOQs associated with the closing of this investigation are: 10725339, 10723544, 10711794, 10691631, 10649259, 10640644, 10629161, 10614957, 10610356, 10606832, 10606766, 10606670, 10597004, 10573057, 10503811, and 10498000.