PUSHED BRAKE TO START STOPPING, BRAKES SHUTTERED. LET UP ON BRAKE, THEN REAPPLIED AND IT SHUTTERED AGAIN. THIS CONTINUED. CHECKED BRAKE FLUID, IT WAS DOWN SLIGHTLY, PUT IN TO FILL. PROBLEM BETTER BUT STILL EXISTS, NOW AIR COMPRESSOR GONE.. THIS CAR WAS BOUGHT IN OCT 2012 WHAT A LEMON. THANK GOODNESS IT IS A LEASE. N…
Read full complaint
PUSHED BRAKE TO START STOPPING, BRAKES SHUTTERED. LET UP ON BRAKE, THEN REAPPLIED AND IT SHUTTERED AGAIN. THIS CONTINUED. CHECKED BRAKE FLUID, IT WAS DOWN SLIGHTLY, PUT IN TO FILL. PROBLEM BETTER BUT STILL EXISTS, NOW AIR COMPRESSOR GONE.. THIS CAR WAS BOUGHT IN OCT 2012 WHAT A LEMON. THANK GOODNESS IT IS A LEASE. NOISE UNDER CAR SINCE DAY BOUGHT. AT 30 MPH IT SOUNDS LIKE SOMETHING HITS SOMETHING UNDER THERE. DEALER SAYS, JUST NATURE OF CAR. I DO NOT BUY THAT EXPLANATION. *TR
NHTSA ODI #10596031
29,509 miles · Nov 12, 2013
SuspensionTiresWheels
TL* THE CONTACT OWNS A 2012 NISSAN ALTIMA. THE CONTACT STATED THAT THE REAR TIRES BECAME WORN. THE CONTACT TOOK THE VEHICLE TO A LOCAL TIRE DEALER TO HAVE THE TIRES REPLACED. HOWEVER, THE TIRES COULD NOT BE ALIGNED CORRECTLY DUE TO FAULTY CALIPERS. THE CONTACTED STATED THAT THE VEHICLE WOULD SHAKE ABNORMALLY WHEN DRIVING AT L…
Read full complaint
TL* THE CONTACT OWNS A 2012 NISSAN ALTIMA. THE CONTACT STATED THAT THE REAR TIRES BECAME WORN. THE CONTACT TOOK THE VEHICLE TO A LOCAL TIRE DEALER TO HAVE THE TIRES REPLACED. HOWEVER, THE TIRES COULD NOT BE ALIGNED CORRECTLY DUE TO FAULTY CALIPERS. THE CONTACTED STATED THAT THE VEHICLE WOULD SHAKE ABNORMALLY WHEN DRIVING AT LEAST 55 MPH DUE TO NOT HAVING THE WHEEL PROPERLY ALIGNED. THE FAILURE MILEAGE WAS 29,509. UPDATED 12/23/13*LJ
Nissan is recalling certain model year 2012-2013 Altima vehicles manufactured from May 10, 2012, through July 26, 2012. These vehicles may have been equipped with transverse link bolts and power steering rack bolts that were not torqued to proper specification.
Consequence & remedy
Consequence: The affected bolts could become loose and fall out which may lead to a loss of vehicle control, increasing the risk of a vehicle crash.
Remedy: Nissan will notify owners, and dealers will tighten the bolts to the proper torque specifications. The safety recall is expected to begin during November 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
Additional source detail variants (2)
Suspension
Nissan is recalling certain model year 2012-2013 Altima vehicles manufactured from May 10, 2012, through July 26, 2012. These vehicles may have been equipped with transverse link bolts and power steering rack bolts that were not torqued to proper specification.
Consequence: The affected bolts could become loose and fall out which may lead to a loss of vehicle control, increasing the risk of a vehicle crash.
Remedy: Nissan will notify owners, and dealers will tighten the bolts to the proper torque specifications. The safety recall is expected to begin during November 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
Steering
Nissan is recalling certain model year 2012-2013 Altima vehicles manufactured from May 10, 2012, through July 26, 2012. These vehicles may have been equipped with transverse link bolts and power steering rack bolts that were not torqued to proper specification.
Consequence: The affected bolts could become loose and fall out which may lead to a loss of vehicle control, increasing the risk of a vehicle crash.
Remedy: Nissan will notify owners, and dealers will tighten the bolts to the proper torque specifications. The safety recall is expected to begin during November 2012. Owners may contact Nissan Customer Service at 1-800-647-7261.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 ALTIMA AND VERSA VEHICLES. THESE VEHICLES MAY BE EQUIPPED WITH SIDE CURTAIN AIR BAGS THAT CONTAIN AN INCORRECT PROPELLANT MIXTURE FOR THE INITIATOR COMPONENT USED, RESULTING IN INSUFFICIENT OUTPUT OF COMPRESSED GAS.
Consequence & remedy
Consequence: THE SIDE CURTAIN AIR BAGS MAY NOT DEPLOY, INCREASING THE RISK OF INJURY.
Remedy: NISSAN WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE ONE OR BOTH SIDE CURTAIN AIR BAG MODULES, AS NECESSARY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 12, 2012. OWNERS MAY CONTACT NISSAN CUSTOMER SERVICE AT 615-725-1000.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 NISSAN ALTIMA VEHICLES MANUFACTURED FROM JUNE 15, 2011, THROUGH JUNE 21, 2011 AND MODEL YEAR 2012 NISSAN NV VEHICLES MANUFACTURED FROM JUNE 23, 2011, THROUGH JUNE 28, 2011 BECAUSE THE AIR BAG CONTROL UNIT (ACU) WAS ASSEMBLED INCORRECTLY.
Consequence & remedy
Consequence: THE AFFECTED ACU WILL NOT OPERATE AS DESIGNED AND THIS ISSUE MAY CAUSE THE AIR BAGS NOT TO INFLATE IN A CRASH WHEN THEY ARE DESIGNED TO INFLATE. THIS COULD INCREASE THE RISK OF INJURY.
Remedy: NISSAN WILL REPLACE THE AIR BAG CONTROL UNIT FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 22, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 NISSAN ALTIMA SEDAN VEHICLES MANUFACTURED FROM APRIL 25, 2011, THROUGH JUNE 10, 2011 AT THE CANTON, MISSISSIPPI PLANT. THE TRANSVERSE LINK BOLT MAY NOT HAVE BEEN TORQUED TO THE PROPER SPECIFICATION. THIS CONDITION COULD CAUSE THE BOLT TO BECOME LOOSE WHILE THE VEHICLE IS BEING DRIVEN, CREATING A RATTLING NOISE AND VIBRATION.
Consequence & remedy
Consequence: IF THE BOLT COMES OUT COMPLETELY, THE DRIVER MAY EXPERIENCE DIFFICULTY CONTROLLING THE DIRECTION OF THE VEHICLE WHICH COULD RESULT IN A CRASH.
Remedy: NISSAN WILL REPLACE THE TRANSVERSE LINK BOLTS AND NUTS AND TIGHTEN THEM TO THE PROPER TORQUE SPECIFICATION FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 8, 2011. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EQ12002 · Autoliv Air Bag Propellant Mixture
Opened Feb 14, 2012 · Closed May 8, 2012
Status: closed (inferred from source dates) · Air Bags:side/window
The summary for this investigation, labeled EQ12-002 Autoliv Closing Resume, can be found attached separately to this resume.This EQ is closed.
Illustration