2019 Ford Explorer

The contact owns a 2019 Ford Explorer. The contact stated that while the vehicle was at a complete stop, the vehicle shuddered. Additionally, the vehicle hesitated to accelerate while driving. No warning light was illuminated. The vehicle was taken to the dealer, where it was diagnosed that the torque converter needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but confirmed that the VIN was not included in Customer Satisfaction Program: 20N07 (Transmission Extended Warranty Coverage) and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 80,000.

I saw an article about the a pillars coming off while driving and wanted to report my story/experience with this problem vehicle! I pay wayyyy too much for this vehicle to be a 2019 and still have low miles (46,700) for it to be such a safety hazard for my family, I definitely expected more for such a big first Ford purchase. Very very disappointed. I don’t have all the receipts together right now to take pictures at this time but they are at my house if needed. -the a pillars have flown off the vehicle while driving down the freeway even after being fixed, even most recent fixes will not completely stay down and could still come off again. This has led to the window trim being ripped off with them and it all causing wind issues and allows stuff to catch on the windows while driving or build up underneath for weather conditions. -there is something within the vehicles power train that will not take alignments and has a very bad shimmy/sway within the wheels while driving. This is very very unsafe at any speed but quite bad at highway speeds, especially with wind because of the a-pillars issue. The way it moves while driving it feels like you’re not in control of the vehicle. Multiple alignments have been attempted, tire swaps and brand new ones have been put on and it continues to get worse. Nobody can figure out what’s causing this. -there are some electrical and heating shortages within the vehicle and intermittently these futures will glitch out and won’t work. Sometimes the display screen won’t come on or shut off, sometimes all the wipers will stop mid swipe and not fully stay down, sometimes the mirrors won’t adjust, some sensors barely work, there are times the seat warmer doesn’t work or does partially, the floorboard heat will only put out cold air unless it’s on auto and high, some lighting functions glitch out, same with the radio, sometimes the auto start don’t work, sometimes the seat positions will stop in mid move and won’t reposition

The torque converter on my 2019 Explorer is messing up. Causing a stutter while driving and an extremely rough idle when trying to stop at a stop light/sign. This stutter happens intermittently and unexpectedly weather driving at a high rate of speed or low. A light never came on and no codes were able to be read. The last day I was able to dive my car the idle suddenly dropped so low mid driving. Thankfully I was going at a low rate of speed and able to get my vehicle off the road. I took my vehicle back to the Ford dealership and asked that they re-evaluate as the problem had gotten worse. That’s when I was informed my torque converter had malfunctioned. Not only did the dealership provide me with that information, but they also informed me that this is a known issue and has affected so many Explorers in this way, Ford had issued multiple TSBs to their service departments notifying them of this issue. I have attached screenshots of TSB 20-2271 and 22-2287, showing Ford is aware of these issues being reported on the 2016-2019 model Explorers. In my research, I’ve also found that the NHTSA has had a previous case, 17S16, showing Fords directive to replace faulty Torque Converters back in June of 2018. It is clear that Ford has not taken this issue seriously and continues to produce and sell vehicles with this bad part. This stutter and sudden decrease in idle could cause a wreck. Thankfully it did not with me, but it is an ongoing issue that could in the future. Ford has acknowledged there’s a problem but has not yet issued a recall on this part, for my VIN or cars like mine. I urge the NHTSA to investigate and encourage Ford to make this right and improve the quality of the torque converters they’re producing and selling to consumers.

When I took a left hand turn coming from a stop-sign the control arm on my front right passenger side busted. I did not hit anything or cause the damange instead this was in part of failure of the product. I was traveling approximately 3 mph on a flat surface with no traffic exiting an industrial park. Because the control arm broke, it caused significant other damage to my vehicle due to the inability to steer my vehicle and the wheel to no longer be controlled by the steering wheel. There were no warning signs and nothing to signal to me that my car was in fact having issues. If I would have been traveling on the hwy during this incident chances are I would have been severally hurt or even killed. I had just dropped off my husband and child at an event where we were traveling on a hwy. Luckily I was traveling at a slow speed during this incident and nobody was injured. The vehicle has been inspected and based on the significant damage (fender, door, mechanical) there has been nothing but challenges getting the issues fixed. My car is still covered under warranty because it's new however between my car insurance and the warranty nobody wants to help cover the cost of the damage that was cause at no fault of my own. Finally, this is a known issue with Ford vehicles. Research shows many, many other complaints just like mine where faulty control arms are breaking at no fault of the driver. As a matter of fact, 3 days ago there was the same incident at a round-about where another Ford Explorer was sitting in the middle with it's control arm broken. Same issue, same scenario.