← New search

2018 Winnebago Era

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Era years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

No component reports in this snapshot.

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

What owners actually said

0 reports

No matching complaints in this snapshot.

Official recalls

5

20V659000 · Seat Belts; Seat Belts:front:anchorage

Oct 27, 2020

Winnebago Industries, Inc (Winnebago) is recalling certain 2012-2021 Era 170X vehicles. The weld nut was installed on the wrong side of the bracket where the shoulder belt attaches, reducing the retention strength of the seat belt.

Consequence & remedy

Consequence: In the event of a crash, the shoulder belt upper anchorage may not provide adequate protection to the passenger, increasing the risk of injury.

Remedy: Winnebago will notify owners, and dealers will coordinate the inspection of affected units and the installation of a serrated flange nut in the intended weld nut location, free of charge. The recall is expected to begin December 21, 2020. Owners may contact Winnebago Customer Care at 1-800-537-1885.

Additional source detail variants (2)

Seat Belts:front:anchorage

Winnebago Industries, Inc (Winnebago) is recalling certain 2012-2021 Era 170X vehicles. The weld nut was installed on the wrong side of the bracket where the shoulder belt attaches, reducing the retention strength of the seat belt.

Consequence: In the event of a crash, the shoulder belt upper anchorage may not provide adequate protection to the passenger, increasing the risk of injury.

Remedy: Winnebago will notify owners, and dealers will coordinate the inspection of affected units and the installation of a serrated flange nut in the intended weld nut location, free of charge. The recall is expected to begin December 21, 2020. Owners may contact Winnebago Customer Care at 1-800-537-1885.

Seat Belts

Winnebago Industries, Inc (Winnebago) is recalling certain 2012-2021 Era 170X vehicles. The weld nut was installed on the wrong side of the bracket where the shoulder belt attaches, reducing the retention strength of the seat belt.

Consequence: In the event of a crash, the shoulder belt upper anchorage may not provide adequate protection to the passenger, increasing the risk of injury.

Remedy: Winnebago will notify owners, and dealers will coordinate the inspection of affected units and the installation of a serrated flange nut in the intended weld nut location, free of charge. The recall is expected to begin December 21, 2020. Owners may contact Winnebago Customer Care at 1-800-537-1885.

19V042000 · Equipment

Jan 17, 2019

Winnebago Industries, Inc. (Winnebago) is recalling certain 2012-2018 Winnebago ERA motorhomes. The overhead cabinet shelf may have been improperly attached, allowing the cabinet face to detach and fall into the cab area.

Consequence & remedy

Consequence: If the cabinet shelf detaches, contents from the cabinet may hit and/or distract the driver, increasing the risk of injury or a crash.

Remedy: Winnebago will notify owners, and dealers will install two support brackets, additional screws, and a maximum capacity warning label, free of charge. The recall began February 27, 2019. Owners may contact Winnebago customer service at 1-641-585-6939 or 1-800-537-1885.

18V546000 · Electrical System

Aug 17, 2018

Winnebago Industries, Inc (Winnebago) is recalling certain 2016-2019 Winnebago Era, Travato, Fuse, View, Trend, Aspect, Paseo, Via, Adventurer, Journey, Tour, and Grand Tour motorhomes. These vehicles have an auxiliary solar charging port circuit that is not fused.

Consequence & remedy

Consequence: If solar panels are connected and they exceed the amperage capacity of the circuit, the unprotected circuit can increase the risk of a fire.

Remedy: Winnebago will notify owners, and dealers will install an inline 15 amp fuse into the auxiliary solar charging port circuit, free of charge. Winnebago issued interim notifications to owners on December 4, 2018. The recall began June 5, 2019. Owners may contact Winnebago customer service 1-641-585-6939 or 1-800-537-1885.

18V274000 · Equipment:mechanical:carrier/rack

May 2, 2018

Winnebago Industries, Inc (Winnebago) is recalling certain 2018 Winnebago Travato and 2018-2019 Winnebago Era, and Revel recreational vehicles. The roof rack may not have been installed with the correct fasteners, possibly resulting in the roof rack detaching from the vehicle while moving.

Consequence & remedy

Consequence: If the roof rack detaches while moving, it could become a road hazard, increasing the risk of a crash.

Remedy: Winnebago will notify owners, and dealers will add a screw adjacent to each rivet, free of charge. The recall began on May 29, 2018. Owners may contact Winnebago customer service at 1-641-585-6939 or 1-800-537-1885. Winnebago's number for this recall is 150.

17V782000 · Equipment

Dec 7, 2017

Winnebago Industries, Inc. (Winnebago) is recalling certain 2013-2018 Winnebago Era, Travato, Minnie Winnie, Fuse, View, Trend, Aspect, Brave, Vista, Sightseer, Adventurer, Forza, Journey, Tour, Revel, Paseo, Chalet, Access, and Intent motorhomes and Commercial vehicles, and 2013-2018 Itasca Spirit, Navion, Cambria, Tribute, Sunstar, Sunova, Suncruiser, Solei, Meridian, Elipse, Horizon, Reyo, and Via motorhomes. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence & remedy

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: Winnebago will notify owners, instructing them to contact Kidde for replacement or aftermarket fire extinguishers, free of charge. The recall began on January 19, 2018. Owners may contact Winnebago customer service at 1-641-585-3535, or Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

0

No exact-year investigations in this snapshot.