IllustrationCONSUMER STATES THAT HEATER CORE "EXPLODED" WHILE DRIVING AND STEAM CLOUDED ALL INTERIOR WINDOWS RESULTING IN NO VISIBILITY. THE HEATER CORE EXPLOSION ALSO CAUSED COOLANT TO LEAK FROM UNDER DASHBOARD INTO VEHICLE'S INTERIOR. TS
1994 Volkswagen Corrado
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Corrado years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 1 of 4 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Visibility. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
4 reportsCONSUMER HAD WORK DONE FROM RECALL 98V295000/ COOLANT SYSTEM. FROM PRIOR WORK DONE THE AUXILIARY ELECTRIC COOLANT PUMP BROKE. OWNER PURCHASED A NEW, REDESIGNED PUMP AND INSTALLED IT HIMSELF. *AK *ML
IN OCTOBER 1999 VEHICLE HAD RECALL REMEDY DONE. BUT WITHIN 2,000, ENGINE COOLANT PUMP, WHICH WAS REPLACED DURING RECALL REPAIRS, WAS NOT DESIGED FOR THIS PROBLEM. IT CAUSED PRESSURE IN THE PUMP, CAUSING THE SEALS TO EXPLODE AND WATER TO LEAK ONTO ENGINE COMPARTMENT, RESULTED TIN VEHICLE STALLING WHICH MAY HAVE RESULTED IN A…
Read full complaint
IN OCTOBER 1999 VEHICLE HAD RECALL REMEDY DONE. BUT WITHIN 2,000, ENGINE COOLANT PUMP, WHICH WAS REPLACED DURING RECALL REPAIRS, WAS NOT DESIGED FOR THIS PROBLEM. IT CAUSED PRESSURE IN THE PUMP, CAUSING THE SEALS TO EXPLODE AND WATER TO LEAK ONTO ENGINE COMPARTMENT, RESULTED TIN VEHICLE STALLING WHICH MAY HAVE RESULTED IN A CRASH. COMMON PROBLEM. MANUFACTURER STATED IT WAS NOT PART OF THE RECALL, AND THE CONSUMER WAS RESPONSIBLE FOR FIXING THE RECALL. THE HEATER CORE RECALL DID NOT REPLACE THE HEATER CORE. A PRESSURE REDUCING VALVE AND A RELAY TO RUN THE COOLING FANS AND AUXILLARY WATER PUMP LONGER. *AK
ATTEMPTED TO STEP ON BRAKES AND THE BRAKES WENT TOO FAR DOWN TO THE FLOOR, ON THE SECOND ATTEMPT TO APPLY THE BRAKES THEY LOCKED UP. EXPLAIN IN MORE DETAILS. *AK
Official recalls
298V295000 · Engine And Engine Cooling:cooling System
Nov 13, 1998
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH VR6 ENGINES. A COOLANT SYSTEM COMPONENT SUCH AS THE THERMO SWITCH, RADIATOR FAN, OR WATER PUMP, CAN MALFUNCTION CAUSING THE COOLANT TEMPERATURE AND COOLANT SYSTEM PRESSURE TO INCREASE SIGNIFICANTLY. OVER TIME, EXCESSIVE PRESSURE CAN CAUSE LEAKAGE OF COOLANT FROMTHE SYSTEM, INCLUDING LEAKAGE FROM THE HEAT EXCHANGER.
Consequence & remedy
Consequence: LEAKAGE OF HOT COOLANT FROM THE HEAT EXCHANGER CAN CAUSE INJURY TO THE FEET OF THE DRIVER OR STEAM UP THE INTERIOR OF THE VEHICLE TEMPORARILY IMPAIRING THE DRIVER'S VISION.
Remedy: DEALERS WILL INSTALL IN THE COOLANT INLET HOSE TO THE HEATER CORE, A PRESSURE REDUCER WITH A 5MM DIAMETER SECURED BY A SPRING TENSIONED HOSE CLAMP. ALSO A NEW RELAY THAT WILL CHANGE THE OPERATION OF THE SECONDARY ELECTRICAL COOLANT PUMP WILL BE INSTALLED. DEALERS WILL ALSO PERFORM A FUNCTIONAL CHECK OF THE COOLING SYSTEM TO MAKE SURE THAT ALL COOLING SYSTEM COMPONENTS OPERATE PROPERLY.
95V178000 · Engine And Engine Cooling:cooling System:fan
Sep 20, 1995
IMPROPER MATERIAL WAS USED IN MANUFACTURING THE RADIATOR FAN MOTOR SHAFT CAUSING THE SHAFT TO WEAR AND BECOME NOISY.
Consequence & remedy
Consequence: A WORN AND NOISY FAN MOTOR SHAFT CAN SEIZE RENDERINGTHE FAN MOTOR INOPERATIVE, EVENTUALLY CAUSING THE ENGINE TO OVERHEAT AND STALL. A STALLED VEHICLE IN TRAFFIC CAN INCREASE THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy: DEALERS WILL REPLACE THE COMPLETE COOLING FAN ASSEMBLY ON VEHICLE HAVING THE POTENTIAL SHAFT MATERIAL PROBLEM. DEALERS WILL INSTALL A NEW FAN BLADE INCLUDING A NEW LOCK NUT ON VEHICLE WITH LOOSE FAN BLADE LOCK NUTS.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.