IllustrationI HAVE A 2007 CAMRY HYBRID AND HAVE THE SAME SKID/LURCH PROBLEM AS THE PRIUS. MY CAR IS NOT BEING RECALLED AND PHONE CALLS TO THE DEALER, TOYOTA AS WELL AS EMAILS HAVE NOT BEEN RECOGNIZED. THIS ISSUE IS NOT LIMITED TO RECENT PRODUCTS. PLEASE LET ME KNOW HOW I CAN RESOLVE THIS PROBLEM. *TR
2007 Toyota Camry Hybrid
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Camry Hybrid years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
350–25K
5325–50K
8650–75K
11975–100K
169100–150K
81150K+
543 reports with mileage · 59 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Service Brakes. Review the 391 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Vehicle Speed Control. Review the 160 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electronic Stability Control (esc). Review the 115 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
31 crash reports7 fire reports14 injury reports
Vehicle Speed Control complaints
160 reportsWHEN I TURNED THE CAR ON AT 7:30 AM THE "CHECK VSC" WARNING LIGHT IMMEDIATELY CAME ON. I PLANNED TO TAKE MY DAUGHTER TO SCHOOL AND THEN DROP THE CAR OFF TO BE CHECKED AT MY LOCAL TOYOTA DEALER. AFTER ABOUT 2-3 MILES, THE WARNING LIGHT TURNED OFF. AFTER ABOUT 3-4 MILES FURTHER, I APPLIED THE BRAKES AND GOT NO BRAKING ACTION. …
Read full complaint
WHEN I TURNED THE CAR ON AT 7:30 AM THE "CHECK VSC" WARNING LIGHT IMMEDIATELY CAME ON. I PLANNED TO TAKE MY DAUGHTER TO SCHOOL AND THEN DROP THE CAR OFF TO BE CHECKED AT MY LOCAL TOYOTA DEALER. AFTER ABOUT 2-3 MILES, THE WARNING LIGHT TURNED OFF. AFTER ABOUT 3-4 MILES FURTHER, I APPLIED THE BRAKES AND GOT NO BRAKING ACTION. THE BRAKES FELT AS THOUGH THEY HAD COMPLETELY LOST THEIR POWER ASSIST AND THEY DID NOT RESPOND AT ALL. I PUT THE CAR IN NEUTRAL AND COASTED UNTIL I SLOWED DOWN ENOUGH TO BE ABLE TO PULL OFF THE ROAD. I HAD THE CAR TOWED TO THE DEALER. AS OF THIS MORNING, THEY HAVE NOT BEEN ABLE TO DUPLICATE THE PROBLEM AND THE "CHECK VSC" LIGHT IS STILL OFF. NO INDICATION WAS LEFT ON THE CARS COMPUTER THAT ANY MAINTENANCE LIGHT HAD COME ON OR THAT THERE WERE ANY ISSUES. *TR
WHILE PARKING, MY VEHICLE SUDDENLY ACCELERATED WHILE TURNING INTO A PARKING SPOT. I DID NOT INADVERTENTLY PRESS THE ACCELERATOR, AND THE ACCELERATOR WAS NOT ENTANGLED IN THE FLOOR MAT. THE VEHICLE RAPIDLY ACCELERATED OVER THE CURB, THROUGH AN ADJOINING GRASSY AREA, AND STOPPED AFTER HITTING A CEMENT WALL. LATER, THE CAR WAS I…
Read full complaint
WHILE PARKING, MY VEHICLE SUDDENLY ACCELERATED WHILE TURNING INTO A PARKING SPOT. I DID NOT INADVERTENTLY PRESS THE ACCELERATOR, AND THE ACCELERATOR WAS NOT ENTANGLED IN THE FLOOR MAT. THE VEHICLE RAPIDLY ACCELERATED OVER THE CURB, THROUGH AN ADJOINING GRASSY AREA, AND STOPPED AFTER HITTING A CEMENT WALL. LATER, THE CAR WAS INSPECTED BY THE TOYOTA DEALER WHERE I PURCHASED THE VEHICLE. THE DEALER INDICATED THERE WERE NO PROBLEMS WITH THE ACCELERATOR OR OTHER EQUIPMENT THAT WOULD HAVE CAUSED THIS SUDDEN ACCELERATION. *TR
MY 2007 CAMRY HAS BEEN RECALLED DUE TO THE PEDAL ISSUE AND THE MAT. I TOOK THE MAT OUT HOWEVER EVEN THOUGH MY PEDAL HAS STUCK ALREADY THE DEALERSHIP WILL NOT GIVE ME A RENTAL UNTIL THEY FIX THE PROBLEM OR ANOTHER TRADE-IN. I FEEL VERY UNSAFE AND NOW THEY ARE RECALLING CAMRY'S FOR OTHER REASONS AS WELL. I WOULD LIKE ANOTHER CAR A…
Read full complaint
MY 2007 CAMRY HAS BEEN RECALLED DUE TO THE PEDAL ISSUE AND THE MAT. I TOOK THE MAT OUT HOWEVER EVEN THOUGH MY PEDAL HAS STUCK ALREADY THE DEALERSHIP WILL NOT GIVE ME A RENTAL UNTIL THEY FIX THE PROBLEM OR ANOTHER TRADE-IN. I FEEL VERY UNSAFE AND NOW THEY ARE RECALLING CAMRY'S FOR OTHER REASONS AS WELL. I WOULD LIKE ANOTHER CAR AND FEEL I SHOULD NOT HAVE TO WORRY ABOUT TAKING MY CHILDREN AND GRANDCHILD IN THE CAR BECAUSE THEY HAVE NOT FIGURED OUT WHAT TO DO. CAN YOU HELP ME GET A REPLACEMENT CAR? *TR
AT 12:55 P.M. I WAS PULLING FORWARD IN TO A PARKING SPACE WHERE THERE WAS A CURB AND A TREE ON THE RIGHT SIDE OVER THE CURB, IN TARTAN PARK IN BLOOMINGTON MINNESOTA. MY TOYOTA CAMRY 2008 GAS PEDAL BECAME STUCK AND I WENT OVER THE CURB AND SLAMMED INTO THE TREE AND THREW ME BACK. PEOPLE TOLD ME AT THE PARK THAT THIS WAS ONE OF …
Read full complaint
AT 12:55 P.M. I WAS PULLING FORWARD IN TO A PARKING SPACE WHERE THERE WAS A CURB AND A TREE ON THE RIGHT SIDE OVER THE CURB, IN TARTAN PARK IN BLOOMINGTON MINNESOTA. MY TOYOTA CAMRY 2008 GAS PEDAL BECAME STUCK AND I WENT OVER THE CURB AND SLAMMED INTO THE TREE AND THREW ME BACK. PEOPLE TOLD ME AT THE PARK THAT THIS WAS ONE OF THE CARS THAT HAD BEEN RECALLED FOR THIS PROBLEM, I WAS NEVER NOTIFIED. I COULD HAVE RUN RIGHT IN TO THE CHILDREN PLAYING IF IT WASN'T FOR THE TREE. *TR UPDATED 10/15/14
TL*THE CONTACT OWNS A 2007 TOYOTA CAMRY HYBRID. WHILE APPROACHING A STOP SIGN, THE VEHICLE ACCELERATED INTO AN INTERSECTION; HOWEVER, AFTER REPEATED BRAKE APPLICATION, SHE WAS ABLE TO STOP THE VEHICLE. THE MANUFACTURER WAS NOTIFIED AND SHE WAS ADVISED TO REMOVE THE FLOOR-MATS. THE FAILURE RECURRED AFTER THE MATS WERE REMOVED. T…
Read full complaint
TL*THE CONTACT OWNS A 2007 TOYOTA CAMRY HYBRID. WHILE APPROACHING A STOP SIGN, THE VEHICLE ACCELERATED INTO AN INTERSECTION; HOWEVER, AFTER REPEATED BRAKE APPLICATION, SHE WAS ABLE TO STOP THE VEHICLE. THE MANUFACTURER WAS NOTIFIED AND SHE WAS ADVISED TO REMOVE THE FLOOR-MATS. THE FAILURE RECURRED AFTER THE MATS WERE REMOVED. THE VEHICLE WAS TAKEN TO THE DEALER FOR INSPECTION AND THE TECHNICIANS WERE UNABLE TO IDENTIFY THE CAUSE OF THE FAILURE. THE FAILURE MILEAGE WAS 497 AND THE CURRENT MILEAGE WAS 38,000.
CRUISE CONTROL DOES NOT WORK CORRECTLY ON ROLLING HILLS WHICH IS LIKELY GOING TO CAUSE COLLISIONS. THE CRUISE CONTROL WILL ALLOW THE SPEED TO DECREASE BY AS MUCH AS 5 MPH WHILE DESCENDING DOWN THE A HILL, THEN AS IT BEGINS TO CLIMB IT QUICKLY ACCELERATES WAY OVER THE TARGET SPEED. THIS CAUSES A WHIPLASH EFFECT TO ALL PASSENGERS …
Read full complaint
CRUISE CONTROL DOES NOT WORK CORRECTLY ON ROLLING HILLS WHICH IS LIKELY GOING TO CAUSE COLLISIONS. THE CRUISE CONTROL WILL ALLOW THE SPEED TO DECREASE BY AS MUCH AS 5 MPH WHILE DESCENDING DOWN THE A HILL, THEN AS IT BEGINS TO CLIMB IT QUICKLY ACCELERATES WAY OVER THE TARGET SPEED. THIS CAUSES A WHIPLASH EFFECT TO ALL PASSENGERS AND MAY CAUSE THE DRIVER TO LOSE CONTROL AND COLLIDE WITH VEHICLES. *TR
I AM HAVING THE SAME PROBLEM AS MENTIONED IN CONSUMER COMPLAINT: ODI CASE NUMBER: 10188438 (COMPONENT: VEHICLE SPEED CONTROL:CRUISE CONTROL). WHENEVER I START UP A STEEP OR SLIGHTLY STEEP HILL WITH THE CRUISE CONTROL ON, THE CAR DOESN'T START TO ACCELERATE SOON ENOUGH. THEN, IT APPEARS TO ACCELERATE ALL AT ONCE. I HAVE STARTE…
Read full complaint
I AM HAVING THE SAME PROBLEM AS MENTIONED IN CONSUMER COMPLAINT: ODI CASE NUMBER: 10188438 (COMPONENT: VEHICLE SPEED CONTROL:CRUISE CONTROL). WHENEVER I START UP A STEEP OR SLIGHTLY STEEP HILL WITH THE CRUISE CONTROL ON, THE CAR DOESN'T START TO ACCELERATE SOON ENOUGH. THEN, IT APPEARS TO ACCELERATE ALL AT ONCE. I HAVE STARTED ACCELERATING THE CAR MYSELF, RATHER THAN ALLOWING THE CRUISE CONTROL TO ACCELERATE, ON HILLS. AS STATED IN THE PREVIOUS COMPLAINT, THE CRUISE CONTROL WORKS FINE ON FAIRLY LEVEL GROUND.
THE CAR'S CRUISE CONTROL BEHAVIOR ON LEVEL GROUND IS FINE, BUT ON ROLLING HILLS IT'S TOTALLY EGREGIOUS, AND INDICATES TO ME THAT THIS FEEDBACK CONTROL SYSTEM MAY BE CLOSE TO INSTABILITY AND THEREFORE POTENTIALLY DANGEROUS. I THINK THAT THE CONTROL ALGORITHM USED IS DREADFULLY SUB-OPTIMAL, AND HAS SUCH LONG INTERNAL CONTROL-LOOP …
Read full complaint
THE CAR'S CRUISE CONTROL BEHAVIOR ON LEVEL GROUND IS FINE, BUT ON ROLLING HILLS IT'S TOTALLY EGREGIOUS, AND INDICATES TO ME THAT THIS FEEDBACK CONTROL SYSTEM MAY BE CLOSE TO INSTABILITY AND THEREFORE POTENTIALLY DANGEROUS. I THINK THAT THE CONTROL ALGORITHM USED IS DREADFULLY SUB-OPTIMAL, AND HAS SUCH LONG INTERNAL CONTROL-LOOP PROCESSING DELAYS THAT ITS REACTIONS TO CHANGING ROAD CONDITIONS ARE ALARMING. WHAT I FIND IS THE FOLLOWING BEHAVIOR. THE CAR SUBSTANTIALLY OVERSHOOTS (BY 10 MPH OR MORE) THE SET SPEED ON THE DOWNHILL PORTION OF EACH HILL, BUT THEN WAITS SO LONG BEFORE REACTING TO THE BEGINNING OF THE NEXT UPHILL PORTION, THAT IT THEN UNDERSHOOTS THE SET SPEED BY SUCH A LARGE AMOUNT (5 MPH OR MORE) THAT IT HAS TO "FLOOR" THE ACCELERATOR IN ORDER TO CATCH UP. STILL ON THE UPHILL PORTION, IT THEN PROCEEDS TO OVERSHOOT THE SET SPEED AGAIN, BEFORE FINALLY SETTLING DOWN TO THE DESIRED SPEED. THIS CYCLE OF EVENTS REPEATS OVER AND OVER AGAIN AS ONE NEGOTIATES ROLLING HILLS WITH THE CRUISE CONTROL "ON." WHY IS THE INTERNAL LOOP DELAY SO LONG? WHY IS THE CRUISE CONTROL SYSTEM NOT PROPERLY DESIGNED? (I HAPPEN TO HAVE EXPERTISE IN CONTROL SYSTEMS.) THIS CONTROL SYSTEM REALLY NEEDS TO BE RE-DESIGNED AS A MATTER OF PRIORITY! THE CRUISE CONTROL'S BEHAVIOR COULD THEN BE FIXED BY A SIMPLE FIRMWARE UPDATE. *JB
CRUISE CONTROL VARIES SPEED BY 7 MPH HOUR WHEN ENGAGED DURING NON FLAT TERRAIN CAUSING A SAFETY ISSUE WITH CARS FOLLOWING. WHEN ON FLAT TERRAIN THE CRUISE CONTROL MAINTAINS ITS TARGET SPEED WITHIN +- 1 MPH WITH NO PROBLEMS. THE SAFETY ISSUES OCCURS WHEN THE VEHICLE ENCOUNTERS ROLLING HILLS, THE CRUISE CONTROL WILL ALLOW THE …
Read full complaint
CRUISE CONTROL VARIES SPEED BY 7 MPH HOUR WHEN ENGAGED DURING NON FLAT TERRAIN CAUSING A SAFETY ISSUE WITH CARS FOLLOWING. WHEN ON FLAT TERRAIN THE CRUISE CONTROL MAINTAINS ITS TARGET SPEED WITHIN +- 1 MPH WITH NO PROBLEMS. THE SAFETY ISSUES OCCURS WHEN THE VEHICLE ENCOUNTERS ROLLING HILLS, THE CRUISE CONTROL WILL ALLOW THE SPEED TO DECREASE BY AS MUCH AS 5 MPH WHILE DESCENDING DOWN THE HILL, THEN AS IT BEGINS TO CLIMB WILL AGGRESSIVELY ACCELERATE TO 2 MPH OVER THE TARGET SPEED. WHEN THE ROAD FLATTENS OUT AGAIN IT WILL MAINTAIN THE ORIGINAL TARGET SPEED. AT HIGHWAY SPEEDS, 70 MPH, THIS CAUSES SAFETY ISSUES ESPECIALLY WHEN TRAFFIC CONDITIONS ARE MODERATE TO HEAVY IN THAT TRAFFIC FOLLOW WILL NOT HAVE ANY INDICATION THAT THE SPEED IS SLOW BY 5 MPH. THIS IN TURN WILL CAUSE A HAZARDOUS SITUATION WHERE A COLLISION COULD OCCUR. THIS HAS BEEN REPORTED TO THE LOCAL TOYOTA DEALER AND TOYOTA SUPPORT RESPONDED THAT ALL IS WORKING WITHIN PARAMETERS AND NO ADJUSTS ARE PLANNED. CASE # 200701250758 HAS BEEN OPENED WITH TOYOTA CUSTOMER RELATIONS WITH NO PROMISE OF ACTION. *NM
Official recalls
315V689000 · Visibility:power Window Devices And Controls
Oct 22, 2015
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
Consequence & remedy
Consequence: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
12V491000 · Visibility:power Window Devices And Controls
Oct 10, 2012
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
Consequence & remedy
Consequence: If the switch overheats, it may melt, possibly resulting in a fire.
Remedy: Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
09V388000 · Vehicle Speed Control:accelerator Pedal
Oct 5, 2009
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.
Consequence & remedy
Consequence: A STUCK OPEN ACCELERATOR PEDAL MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.
Remedy: TOYOTA FILED AN AMENDED DEFECT REPORT ON NOVEMBER 25, 2009, STATING THAT DEALERS WILL MODIFY THE ACCELERATOR PEDAL AND, ON CERTAIN VEHICLES, ALTER THE SHAPE OF THE FLOOR SURFACE UNDER THE PEDAL. THESE CHANGES ADDRESS THE RISK OF PEDAL ENTRAPMENT DUE TO INTERFERENCE WITH THE FLOOR MAT. REDESIGNED ACCELERATOR PEDALS WILL BECOME AVAILABLE BEGINNING IN APRIL 2010 AND DEALERS WILL REPLACE ANY MODIFIED PEDAL WITH THE NEW PEDAL IF DESIRED. ALSO, DEALERS WILL REPLACE ANY GENUINE TOYOTA OR LEXUS ALL-WEATHER FLOOR MATS WITH REDESIGNED ALL-WEATHER MATS, OR REPURCHASE THE PREVIOUS MATS FROM OWNERS WHO DO NOT WANT THE NEW ONES. ADDITIONALLY, SOFTWARE MODIFICATIONS WILL BE INSTALLED ON CAMRY, AVALON AND LEXUS ES 350, IS 350 AND IS 250 MODELS THAT WILL ENSURE THAT THE BRAKE OVERRIDES THE ACCELERATOR IN THE EVENT BOTH BRAKE AND ACCELERATOR PEDALS ARE APPLIED. TOYOTA WILL BEGIN MAILING LETTERS TO OWNERS ON DECEMBER 31, 2009. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331, LEXUS AT 1-800-255-3987.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
4DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
PE14001 · Brake Actuator Malfunction
Opened Jan 23, 2014 · Closed Aug 22, 2014
Status: closed (inferred from source dates) · Service Brakes; Service Brakes, Air:supply:reservoir/tank; Service Brakes, Electric; Service Brakes, Hydraulic:power Assist
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Additional source detail variants (4)
Service Brakes, Air:supply:reservoir/tank
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Service Brakes, Electric
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Service Brakes, Hydraulic:power Assist
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
Service Brakes
On June 25, 2014, Toyota initiated a Warranty Enhancement Program (ZE1) to extend warranty coverage for the brake actuator assembly and skid control ECU/brake pedal stroke sensor in certain MY 2007 to 2011 Toyota Camry hybrid vehicles. Toyota's program covers repairs related to two conditions:internal malfunctions of the Brake Actuator assembly; and overly sensitive monitoring logic for the Brake Pedal Stroke Sensor.Primary coverage provides warranty enhancement until November 30, 2015, with no mileage limitation.After the primary coverage period ends, secondary coverage is provided for 10 years or 150,000 miles from the date of first use, whichever occurs first.In addition, on July 10, 2014, Toyota initiated Limited Service Campaign E0U to replace the Brake Reservoir Tank in MY 2007 through 2011 Toyota Camry hybrid vehicles.The LSC will be available until June 30, 2017, and will only be available at an authorized Toyota dealer.ODI's analysis of failure data determined that the majority of records were related to the Brake Actuator condition, which appeared to be the causal component in 734 complaints/field reports and 864 warranty claims.The Brake Pedal Stroke Sensor (80 reports/189 claims) and Brake Reservoir Tank (91 reports/44 claims) conditions were identified in far fewer records.Analysis of the failure data indicate that each condition provides warning prior to any reduction in power assisted braking, with less than 10 percent of all reports and claims involving diagnostic codes or complaint narratives indicating increased braking effort or reduced brake effectiveness.In addition, most of the incidents in which reduced braking assist appears to have occurred involved operation in a reduced assist mode and not a sudden, complete loss of power assisted braking.ODI assessed reduced assist mode in a subjective driving evaluation which indicated that the brake system provided normal and harddeceleration capability with reasonable increases in pedal effort.Less than one percent of reports and claims analyzed by ODI included evidence indicating a complete loss of power assisted braking occurred and this mode requires operation for a significant period of time with multiple audible and visual warnings.Repair expense was cited in many of the complaints reviewed by ODI, especially those related to the Brake Actuator, which had repair costs exceeding $3,000 according to some complaints.High repair cost appears to have been a factor in the only crash identified by ODI for the fault conditions identified by Toyota, which involved a Brake Actuator failure that was diagnosed but the owner declined repair approximately eight months prior to the reported crash incident.This preliminary evaluation is closed.The closing of this investigation does not constitute a finding that a safety-related defect does not exist.For additional information regarding this investigation, including analysis of the Brake Actuator, Brake Pedal Stroke Sensor, and Brake Reservoir Tank fault conditions and failure experience, see Attachment A to this closing resume.
EA12006 · Power Window Master Switch Fire
Opened Jun 14, 2012 · Closed Feb 12, 2013
Status: closed (inferred from source dates) · Electrical System; Structure:body; Unknown Or Other
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
Additional source detail variants (3)
Electrical System
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
Structure:body
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
Unknown Or Other
On October 10, 2012, Toyota initiated a safety recall of approximately 2.5 million U.S. vehicles involving the following models and model years:2007-2009 Camry and Camry Hybrid, 2009 Corolla and Corolla Matrix, 2008 Highlander and Highlander Hybrid, 2007-2009 RAV4, 2008-2009 Scion xB and xD, 2008-2009 Sequoia, 2007-2008 Tundra, 2007-2008 Yaris, and 2009 Pontiac Vibe.See NHTSA recall number 12V-491 for more details, including the affected vehicle manufacture dates for each vehicle model.Note that only early-production 2009 model year vehicles are included in the recall.Toyota and GM dealers will inspect the power window master switch (PWMS) assemblies and apply a specialized grease that inhibits heat build-up.The circuit board in the PWMS may be replaced with a new one if notchy or sticking feeling is observed during the inspection.The failure report summary above shows counts for the vehicles identified at the start of this Engineering Analysis, specifically the approximately 1.4 million vehicles that share an identical PWMS assembly design including, model year 2007-2009 Camry, Camry Hybrid, RAV4, and Yaris built from September 2006 through August 2008, as well as all 2008 Highlander Hybrid.Toyota subsequently identified approximately one million additional vehicles that have a slightly different PWMS design but contain the same defect condition.Note that the totals for complaints and fires shown above may include duplicative reports (between ODI and manufacturer reports).This Engineering Analysis is closed.See attached report for additional information.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10323848, 10360414, 10392622, 10394453, 10411328, 10429983, 10436663, 10446699, 10447416, 10447417, 10447419, 10447444, 10447515, 10447845, 10447947, 10449270, 10450133, 10450568, 10450606, 10450641, 10451821, 10455540, 10455614, 10456353, 10456438, 10457854, 10457955, 10459730, 10460166, 10460691, 10461220, 10462140, 10462200, 10462247, 10462404, 10462705, 10462761, 10464451, 10464769, 10465421, 10466279, 10466667, 10468126, 10468265, 10475230, 10470313, 10470684, 10471551, 10471824, 10472336, 10472910, 10473753, 10473967, 10473969, 10476921, 10477469, 10478563 and 10478657.
PE12002 · Power Window Master Switch Fire
Opened Feb 6, 2012 · Closed Jun 14, 2012
Status: closed (inferred from source dates) · Electrical System; Structure:body; Unknown Or Other
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Additional source detail variants (3)
Electrical System
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Structure:body
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.
Unknown Or Other
ODI has identified certain Toyota vehicles experiencing a higher rate of fire and thermal event incidents among all Toyota vehicles that use the same power window master switch design.They include a total of approximately 1.4 million model year (MY) 2007 through 2009 Camry, Camry Hybrid, RAV4 and Yaris vehicles built from approximately September 2006 through August 2008, as well as all MY 2008 Highlander Hybrid vehicles.This Preliminary Evaluation has been upgraded to an Engineering Analysis (EA12-006) to further study the alleged defect and its consequences.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10461220, 10460691, 10460166, 10459730, 10457955, 10457854, 10456438, 10456353, 10455614, 10455540, 10451821, 10450641, 10450606, 10450568, 10450133, 10449270, 10447947, 10447845, 10447515, 10447444, 10447419, 10447417, 10447416, 10446699, 10436663, 10429983, 10411328, 10407290, 10394453, 10392622, 10360414, 10323848.