2017 Suzuki DL650

This motorcycle has been garage kept. It is in mint condition with 2114 miles on the odometer. It was purchased new in 2018. In 2024 the ABS light on the instrumentation illuminated. I tested the brakes to see if the ABS still worked, but it does not work. The rear tire can be locked up to skid, and the ABS does nothing. It used to work in years prior, as I had tested it in the past by applying heavy rear brakes. According to the manual, the error code #35 indicates a faulty ABS unit. The trouble-shooting is to test for 12 volts at the connector to the ABS unit. I put the bike into service mode, I got error code 35, and I tested the voltage to the unit and it was over 12 volts. I went online and discovered that ABS units failing on this motorcycle is not a rare event. I also learned that the old ABS unit 55610-28K00 has been superseded with part number 55610-2K01. This would indicate an issue with the earlier unit. The replacement cost is list price of $986.42, sale price of $828.59. This part can be found under "Hydraulic Unit" on the OEM parts schematic. Non-functioning ABS, especially on the front wheel, can be very dangerous and lead to serious injury or death during an emergency brake application on a motorcycle. I contacted Suzuki Motors of America. They have no recall on the ABS unit, and they offered no assistance due to the warranty being expired. Yet they have a new part number, replacing the old part for some reason. They must be aware of a high failure rate of the original ABS unit. I feel that it is very irresponsible for Suzuki Motors to send out motorcycles with faulty ABS units and not do something to remedy the dangerous situation this creates. The consumer's only option at this point is to have the ABS unit replaced at well over $1000 when factoring in taxes and labor charges. If you can, please check to find out how many ABS units they have sold due to this issue. Thank you.