2021 Subaru Legacy

Vehicle: 2021 Subaru Legacy Base 2.5i Mileage:~65,000 miles My engine suddenly began making loud internal knocking/tapping noises with no warning lights, no overheating, and no prior symptoms. The vehicle immediately became unsafe to operate. I had it towed to a Subaru dealership, where technicians confirmed the noise was coming from inside the engine and recommended a full engine replacement. The failure happened without any warning indicators, misfires, overheating, or oil pressure warnings. All diagnostics (including compression and leakdown) were clean, and the vehicle has been properly maintained. Subaru of America acknowledged the internal failure but only offered $1,000 goodwill toward a multi‑thousand‑dollar engine replacement. This appears to be a premature internal engine failure on the FB25 engine, which may indicate a defect. A sudden internal engine failure at highway speeds could lead to loss of power, stalling, or inability to accelerate, creating a safety hazard for the driver and surrounding traffic. I am filing this complaint because this type of unexpected internal engine failure at relatively low mileage may represent a pattern and should be tracked for potential investigation.

Subaru has released a service bulletin regarding concerns with the Thermo Control Valve in specific vehicles. Unfortunately, individuals with vehicles bearing a rebuilt title, including myself, are required to cover expenses exceeding $2,000 out of their own pockets. Despite evidence indicating that the issue with the engine area is unrelated to the vehicle's rebuilt title, Subaru has chosen not to initiate a recall. This unequal treatment of titled vehicle owners is unjust, especially considering that these vehicles have passed all necessary local inspections and regulations to be deemed roadworthy. All vehicles falling within the designated mileage and age parameters should qualify for assistance. It is my belief that a recall must be issued, as this is a mechanical flaw present since the vehicle's initial manufacturing. In the accompanying service bulletin, Subaru acknowledges fault by stating that they have developed a more reliable and durable component. A P26A3 check engine light code.