NISSAN QUEST 1999. GAS PEDAL IS BLOCKING AND REQUIRES REVERE STRENGTH TO BE PUSHED. THIS HAPPENS SEVERAL TIMES DURING THE DAY. ONCE THE PEDAL IS PUSHED HARD THE VEHICLE SUDDENLY THRUSTS, CAUSING POSSIBLE DAMAGE TO THE ENGINE AND TRANSMISSION. THIS ALSO CAUSES THE VEHICLE TO SUDDENLY GAIN MUCH SPEED AND REQUIRES EXTRA CONTROL BY …
Read full complaint
NISSAN QUEST 1999. GAS PEDAL IS BLOCKING AND REQUIRES REVERE STRENGTH TO BE PUSHED. THIS HAPPENS SEVERAL TIMES DURING THE DAY. ONCE THE PEDAL IS PUSHED HARD THE VEHICLE SUDDENLY THRUSTS, CAUSING POSSIBLE DAMAGE TO THE ENGINE AND TRANSMISSION. THIS ALSO CAUSES THE VEHICLE TO SUDDENLY GAIN MUCH SPEED AND REQUIRES EXTRA CONTROL BY THE DRIVER. I AM SEEING MANY COMPLAINTS ON THIS WEBSITE REGARDING THE SAME ISSUE (REFERD TO AS 'GAS PEDAL STICKING'). *TR
NHTSA ODI #10389886
60,000 miles · Mar 5, 2005
EquipmentPower Train
THE ACCELERATOR CABLE ON OUR 1999 NISSAN QUEST FAILED IN 2001, WE REPLACED IT, AND NOW IN 2005 THE CABLE IS FAILING AGAIN. THE ACCELERATOR PEDAL "STICKS" AND YOU HAVE TO PUSH VERY HARD TO GET THE VECHILE TO ACCELERATE, CREATING AN UNSAFE SITUATION WHERE YOU OFTEN HAVE TO ACCERATE TOO FAST UPON TAKEOFF. THIS COULD LEAD TO A REA…
Read full complaint
THE ACCELERATOR CABLE ON OUR 1999 NISSAN QUEST FAILED IN 2001, WE REPLACED IT, AND NOW IN 2005 THE CABLE IS FAILING AGAIN. THE ACCELERATOR PEDAL "STICKS" AND YOU HAVE TO PUSH VERY HARD TO GET THE VECHILE TO ACCELERATE, CREATING AN UNSAFE SITUATION WHERE YOU OFTEN HAVE TO ACCERATE TOO FAST UPON TAKEOFF. THIS COULD LEAD TO A REAR END COLLISION. *AK
NHTSA ODI #10112568
Mileage unknown · Feb 8, 2004
Power TrainService Brakes, AirService Brakes, Hydraulic
I HAVE HAD TO LOOK INTO ALIGNMENT PROBELMS AGAIN AND REPLACE THE BRAKES AND THE TIRES AGAIN. I ALSO WAS TOLD BY THE DEALER THAT THIS WAS BECAUSE OF "NORMAL" WEARING OF THE CV JOINTS AND THAT MY FRONT AXLE WAS SHOT SO I HAD TO REPLACE THIS TOO. I HAVE HAD SO MUCH TIRE, TIRE VALVE, BRAKE AND FRONT END TROUBLE, IT'S RIDICULOUS.*AK
VEHICLE DESCRIPTION: MINI VANS. ONE OR MORE OF THE FIVE BOLTS THAT MOUNT THE RACK AND PINION STEERING GEAR TO THE VEHICLE MAY HAVE BEEN INCORRECTLY TIGHTENED.
Consequence & remedy
Consequence: THERE COULD BE A LOOSENESS IN THE STEERING, WHICH MAY BE ACCOMPANIED BY NOISE OR VIBRATION.
Remedy: DEALERS WILL INSPECT THE VEHICLES AND, IF THE BOLTS ARE MISSING, WILL REPLACE THE STEERING GEAR MOUNTING BOLTS. ALL BOLTS WILL BE TIGHTENED TO THE SPECIFIED TORQUE.
VEHICLE DESCRIPTION: MINIVANS AND LIGHT DUTY TRUCKS. THE TAIL LIGHT SOCKET MAY HAVE BEEN IMPROPERLY MOLDED, RESULTING IN THE LOCKING TAB HAVING INSUFFICIENT FORCE TO RETAIN THE BULB.
Consequence & remedy
Consequence: IF THE BULB FALLS OUT OF THE SOCKET, THE BRAKE OR TAIL LAMP FUNCTION CANNOT OCCUR.
Remedy: DEALERS WILL REPLACE THE TAIL LAMP SOCKETS.
VEHICLE DESCRIPTION: MINI VANS EQUIPPED WITH E-Z ENTRY SEATS. THE AFFECTED VEHICLES MAY HAVE A SECOND ROW RIGHT HAND SIDE CAPTAIN CHAIR THAT HAS INADEQUATE LUBRICATION OF THE EASY ENTRY AND EXIT LATCH SYSTEM. IN SOME CASES, THE ACTUATOR SPRING IN THE LATCH COULD DEFORM AFTER REPEATED USE, CAUSING THE LATCH TO REMAIN IN THE UNLATCHED POSITION. IF THIS OCCURS, THE SEAT WILL SLIDE FREELY ON THE SEAT TRACK AND THE SPRINGS ON THE TRACK WILL MOVE THE SEAT TO THE EASY ENTRY POSITION TOWARD THE FRONT OF THE VEHICLE.
Consequence & remedy
Consequence: AN UNLATCHED SEAT TRACK COULD RESULT IN AN INCREASED RISK OF INJURY IN THE EVENT OF A VEHICLE CRASH.
Remedy: DEALERS WILL REPLACE THE SEAT TRACK FOR THE SECOND ROW RIGHT HAND SIDE CAPTAIN'S CHAIR, WHICH INCLUDES THE EASY ENTRY AND EXIT LATCH MECHANISM.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
PE04020 · Failing Headlights
Opened Feb 26, 2004 · Closed Jun 24, 2004
Status: closed (inferred from source dates) · Exterior Lighting:headlights
NISSAN AND FORD FOUND THAT THE ORIGINAL EQUIPMENT HEADLIGHT STAINLESS STEEL BULB TERMINALS MAY OVER TIME CAUSE ELEVATED CONTACT RESISTANCE AND OVERHEAT THE ELECTRICAL CONNECTOR HOUSING.THIS CAN RESULT IN A HEADLIGHT FLICKERING, BULB OUTAGE AND HEAT DEFORMATION TO THE HEADLIGHT CONNECTOR.IN APRIL 1999, THE SUPPLIER OF THE HEADLIGHT FOR NISSAN AND FORD CHANGED TO A BULB USING THE STAINLESS STEEL TERMINALS THAT DID NOT MEET ORIGINAL SPECIFICATIONS.ON JULY 17, 2000, THE SUPPLIER BEGAN USING A BULB MEETING THE VEHICLE MANUFACTURER'S SPECIFICATIONS.THIS PROBLEM CAN AFFECT INDEPENDENTLY EITHER HEADLIGHT BUT DOES NOT CAUSE SIMULTANEOUS FAILURE OF BOTH HEADLIGHTS. THE PROBLEM ALSO DOES NOT AFFECT FRONT PARKING LAMPS.AS A RESULT, THE COMPLAINTS TYPICAL REPORT SINGLE FAILURE OF ONE HEADLIGHT.THERE ARE NO CRASHES OR LOSS OF VEHICLE CONTROL REPORTED.A SAFETY-RELATED DEFECT TREND HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
1999 Nissan Quest Problems, Complaints & Recalls | Skip That Year
Illustration