IllustrationWHEN DRIVING ON HIGHWAYS OR BRIDGES FEB WARNING SIGN APPEARS WITH A MESSAGE (UNAVAILABLE :FRONT RADAR OBSTRUCTION) , NISSAN DEALERSHIP REPLACED THE SENSOR TWICE BUT IT KEEPS HAPPENING
2018 Nissan 370Z
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all 370Z years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 2 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Service Brakes. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports0 fire reports1 injury reports
What owners actually said
2 reportsNISSAN 370Z (TOTAL RIDE OF 10,000 KILOMETERS) PURCHASED FROM NISSAN KOREA (GANGNAM BRANCH) IN LATE JULY 2019 AND RODE ON POCHEON LACEWAY (CAR RACECOURSE, CIRCUIT) ON FEBRUARY 8, 2019, AND SUFFERED A HUGE BLOW DUE TO SUSPECTED BREAKAGE. AFTER RIDING A CIRCUIT (WITH ENOUGH COOLING, TOTAL CIRCUIT DRIVING BLACK BOX VIDEO) AT A CERTA…
Read full complaint
NISSAN 370Z (TOTAL RIDE OF 10,000 KILOMETERS) PURCHASED FROM NISSAN KOREA (GANGNAM BRANCH) IN LATE JULY 2019 AND RODE ON POCHEON LACEWAY (CAR RACECOURSE, CIRCUIT) ON FEBRUARY 8, 2019, AND SUFFERED A HUGE BLOW DUE TO SUSPECTED BREAKAGE. AFTER RIDING A CIRCUIT (WITH ENOUGH COOLING, TOTAL CIRCUIT DRIVING BLACK BOX VIDEO) AT A CERTAIN INTERVAL, THE BRAKES DID NOT WORK WELL AT ABOUT 180 MPH, AND SOON AFTER, THE SPONGE PHENOMENON OCCURRED AT 120 MPH. FORTUNATELY, THERE WAS NO ONE NEARBY, AND I WAS ALSO LUCKY TO END UP WITH A STIFF NECK AND NO CREDIT. ON FEBRUARY 7, 2019, THE DAY BEFORE THE ACCIDENT, NISSAN SEONGSU CENTER RAN A CIRCUIT AND ASKED FOR A CHECK ON BRAKES AND OTHER CONSUMABLES. THE COMPANY SAID THAT THERE WAS NO PROBLEM WITH ENGINE OIL CHANGE AND OTHER PARTS. BUT THE NEXT DAY, I ENDED UP LOSING MY LIFE IN A BIG ACCIDENT BECAUSE OF A BRAKE DEFECT DURING CIRCUIT DRIVING. AS A RESULT, I WAS ABLE TO SUSPECT THAT THE ABS MODULE, THE BRAKE COMPONENT USED ON NISSAN VEHICLES, WAS DEFECTIVE, AS THE BLACK BOX VIDEO AND THE DRIVING RECORD AT THAT TIME SHOWED THAT THE BRAKES HAD NOT BEEN APPLIED, AND THE VEHICLE WAS CHECKED A DAY AGO AND ONLY RODE ON A FULL-KILOGRAM VEHICLE. THIS WAS ALSO POINTED OUT BY MBC AS A DEFECTIVE PART MANUFACTURED BY CONTINENTAL COMPANY (INCLUDING DOZENS OF VEHICLE LISTS RELEASED LAST NOVEMBER, INCLUDING NISSAN GTR AND USING PARTS SUCH AS 370Z), WHICH CAUSED THE BRAKE FLUID TO BOIL, RESULTING IN A VERY SERIOUS PROBLEM CONNECTING THE PRESSURE OF THE BRAKES (RESPONSE) TO THE SPONGY PHENOMENON. HOWEVER, NISSAN HAS ONLY RECALLED THE VEHICLE IN RELATION TO THE ABS, BUT HAS BEEN IRRESPONSIBLE ABOUT OTHER PROBLEMATIC VEHICLES. YOU CAN ALSO SEE THAT THE 370Z VEHICLE HAS LONG BEEN A VERY POOR VEHICLE FOR ALL ENGINE RELATED PARTS, AND THE NISSAN CENTER HAS BEEN CHARGING THEM FOR FREE (THIS IS NOT A FORMAL RECALL).
Official recalls
118V153000 · Air Bags:side/window
Mar 6, 2018
Nissan North America, Inc. (Nissan) is recalling certain 2018 Nissan 370Z vehicles. The driver's side curtain air bag may have been installed incorrectly during production, possibly affecting its deployment. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 214, "Side Impact Protection," and 226, "Ejection Mitigation."
Consequence & remedy
Consequence: The incorrect curtain air bag installation can prevent the air bag from deploying correctly in the event of a crash, increasing the risk of injury.
Remedy: Nissan will notify owners, and dealers will inspect the curtain air bag, correcting its installation as necessary, free of charge. The recall began May 1, 2018. Owners may contact Nissan customer service at 1-800-867-7669.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.