When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
8Mar 1, 2017
New Flyer Industries Ltd (New Flyer) is recalling certain 2006 L40LFand DE60LF transit buses, 2006-2007 C35LF, C40LFR, D35LF, D40LFR, D60LFR, DE40LF and DE40LFR transit buses, and 2005-2007 C40LF, D40LF, D60LF, DE60LFA, GE40LF, 2007 D35LFR, and DE60LFR transit buses. These vehicles are equipped with MAN V8-65L axle beams that may have cracks on the upper and/or lower surface, which, over time can cause the axle beam to fail.
Consequence & remedy
Consequence: Failure of the front axle beam can cause a loss of vehicle control, increasing the risk of a crash.
Remedy: New Flyer will notify owners, and dealers will inspect the axle beams and determine a repair, as necessary, free of charge. The recall began on March 10, 2017. Owners may contact New Flyer customer service at 1-204-224-6706. New Flyer's number for this recall is R17-002.
Sep 24, 2009
NEW FLYER IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2009 TRANSIT BUSES MANUFACTURED BETWEEN MAY 2002 AND SEPTEMBER 2009 EQUIPPED WITH LUMINATOR HORIZON LED SIDE DESTINATION SIGNS. THE CONNECTOR BOARD CAN CORRODE DUE TO AN ACCUMULATION OF MOISTURE UNDER THE CONNECTOR.
Consequence & remedy
Consequence: A SHORT COULD OCCUR, POSSIBLY CAUSING SMOKE AND FIRE.
Remedy: NEW FLYER WILL NOTIFY OWNERS AND REPAIR THE BUSES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER2, 2009. OWNERS MAY CONTACT NEW FLYER CUSTOMER SERVICES AT 1-204-934-4876.
Nov 7, 2008
NEW FLYER IS RECALLING 1,001 MY 2004-2007 D40LF, MY 2005 D40LFR, AND MY 2007-2008 D60LFR TRANSIT BUSES EQUIPPED WITH CE NIEHOFF C701A OR C703A ALTERNATORS. FAILURE OF THE FORWARD ALTERNATOR BEARING MAY RESULT IN A DROP AND SEIZURE OF THE ROTATING ALTERNATOR SHAFT AND PULLEY. ONCE THE PULLEY IS STATIONARY, THE ALTERNATOR DRIVE BELT CONTINUES TO PASS OVER THE PULLEY CREATING HIGH QUANTITIES OF BELT DUST.
Consequence & remedy
Consequence: DUE TO THE VERY HIGH INTERNAL TEMPERATURES CREATED AT THE BEARING DURING SHAFT SEIZURE, THE BELT DUST MAY IGNITE, RESULTING IN AN ENGINE COMPARTMENT FIRE.
Remedy: TO INCREASE THE POTENTIAL LONGEVITY OF THE ALTERNATOR BEARINGS, DEALERS WILL INCORPORATE A LOWER TENSION BELT TENSIONER AND A NARROWER BELT. TO PREVENT THERMAL IGNITION IN THE EVENT OF A BEARING FAILURE, A LIGHTER DUTY, NARROWER BELT WILL SHRED RATHER THAN CONTINUE TO RUN OVER THE STATIONARY PULLEY. THE RECALL BEGAN ON NOVEMBER 17, 2008. OWNERS MAY CONTACT NEW FLYER AT 1-204-934-4803.
Jun 14, 2006
ON CERTAIN TRANSIT BUSES BUILT WITH CUMMINS ISL AND ISC DIESEL ENGINES EQUIPPED WITH THE CM850 FUEL SYSTEM, THE ENGINE HIGH PRESSURE FUEL LINES, FROM THE ENGINE HIGH PRESSURE PUMP TO THE ENGINE FUEL RAIL, ARE PRONE TO FAILURE.
Consequence & remedy
Consequence: FAILURE OF THE LINE INTRODUCES HIGH PRESSURE FUEL SPRAY INTO THE ENGINE COMPARTMENT WHICH CAN IGNITE WHEN IT COMES IN CONTACT WITH A HOT SURFACE.
Remedy: CUMMINS WILL INSTALL A FUEL LINE BRACKET TO REDUCE FUEL LINE STRESS. A NEW FUEL LINE WILL BE INSTALLED WHEN ADDING THE BRACKET. CUSTOMERS MAY CONTACT CUMMINS AT 1-800-DIESELS OR NEW FLYER AT 204-934-4876.
Feb 7, 2006
ON CERTAIN TRANSIT BUSES, THE SPOT WELDS WHICH HOLD THE WHEELCHAIR RAMP HINGE ASSEMBLY TOGETHER CAN FAIL ALLOWING THE RAMP TO SEPARATE, WHEN DEPLOYED UNDER LOAD, FROM THE BUS FRAME.
Consequence & remedy
Consequence: SEPARATION OF THE RAMP FROM THE VEHICLE COULD RESULT IN INJURY TO PASSENGERS ON THE RAMP.
Remedy: DEALERS WILL ADD NEW HARDWARE TO THE HINGES WHICH WILL MAKE THE SPOT-WELDING REDUNDANT. THE RECALL BEGAN ON FEBRUARY 15, 2006. OWNERS MAY CONTACT NEW FLYER AT 1-204-934-4874.
Jan 18, 2006
ON CERTAIN TRANSIT BUSES EQUIPPED WITH RELAY VALVES BUILT BY HALDEX/MIDLAND AND DISTRIBUTED BY MERITOR/WABCO WITH VALVE BODY DATE CODE OF 342A4K. THIS VALVE, WHICH IS INSTALLED IN THE REAR AXLE AIR BRAKE CIRCUIT, CAN FAIL RESULTING IN A LOSS OF AIR PRESSURE TO THE REAR SERVICE BRAKES.
Consequence & remedy
Consequence: FAILURE OF THE VALVE WOULD DISABLE THE REAR AXLE SERVICE BRAKE CIRCUIT AND RESULT IN EXTENDED STOPPING DISTANCES WHICH COULD RESULT IN A CRASH.
Remedy: DEALERS WILL INSPECT TO SEE IF THE INSTALLED RELAY VALVE HAS A DATE CODE OF 342A4K AND IF NECESSARY WILL REPLACE THE VALVE FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 25, 2006. OWNERS MAY CONTACT NEW FLYER AT 204-934-4803.
Aug 25, 2005
ON CERTAIN TRANSIT BUSES, HYDRAULIC FLUID CAN LEAK AT THE FLANGE FITTING DUE TO IMPROPER INSTALLATION PROCEDURES. INCORRECT INSTALLATION PROCEDURES MAY CAUSE DAMAGE TO THE O-RING OF THE FLANGE ASSEMBLY, COMPROMISING THE SEALING CAPABILITY OF THE O-RING.
Consequence & remedy
Consequence: LEAKS CAUSED DUE TO DAMAGED O-RINGS COULD CAUSE HYDRAULIC FLUID TO BE SPRAYED ONTO HOT SURFACES AND IGNITE.
Remedy: NEW FLYER WILL CONTACT CUSTOMERS WITH PARTS AND INSTRUCTIONS ON HOW TO COMPLETE THIS RECALL. THE RECALL BEGAN ON AUGUST 30, 2005. OWNERS MAY CONTACT NEW FLYER AT 204-934-4874.
Mar 25, 2005
ON CERTAIN TRANSIT BUSES EQUIPPED WITH MERITOR FRONT AXLE ASSEMBLIES, A WELD IS MISSING ON THE RADIUS ROD ATTACHMENT BRACKETAND THE BRACKET MAY FATIGUE AND FAIL WHILE IN USE.
Consequence & remedy
Consequence: BRACKET FAILURE COULD RESULT IN A CRASH WITHOUT PRIOR WARNING.
Remedy: DEALERS WILL REPLACE THE BRACKETS FREE OF CHARGE. THE RECALL BEGAN ON APRIL 6, 2005. OWNERS MAY CONTACT NEW FLYER AT 204-934-4874.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA09010 · Air Brake System
Opened Jun 18, 2009 · Closed Nov 19, 2010
Status: closed (inferred from source dates) · Service Brakes, Air
INVESTIGATION HAS NOT IDENTIFIED A DEFECT.THERE HAVE BEEN NO REPORTED COMPLAINTS RELATING TO THIS ISSUE SINCE 2006. SEE CLOSING REPORT FOR FURTHER DETAILS.
PE09012 · Air Brake System
Opened Feb 27, 2009 · Closed Jun 18, 2009
Status: closed (inferred from source dates) · Service Brakes, Air:controls
ODI IS CLOSING THIS PRELIMINARY EVALUATION AND OPENING AN ENGINEERING ANALYSIS (EA09-010) TO FURTHER IDENTIFY AND EVALUATE THE VEHICLE ENVIRONMENT AND BRAKE SYSTEM FACTORS THAT MAY BE CAUSING OR CONTRIBUTING TO EXTENDED STOPPING DISTANCE PERFORMANCE IN CERTAIN VEHICLES.
Illustration