NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
11Jan 11, 2018
Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain 2004-2017 FE84D, FE85D, FEC52, FEC72, FEC92, FGB72, FK61F and FM657 trucks. These trucks are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy: MFTA will notify owners, instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on January 11, 2018. Owners may contact MFTA customer service at 1-877-711-0707, or Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. MFTA's number for this recall is MFV00001.
Feb 29, 2016
Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain model year 2012-2016 FEC52, FEC72, FEC92 trucks manufactured February 4, 2011, to March 31, 2015, and 2012-2015 FGB72 trucks manufactured June 22, 2011, to April 8, 2014. The affected vehicles are equipped with an optional cold weather PVC heater kit. In these vehicles, the PVC pipe heater wiring may chafe on a metal clamp possibly resulting in the wire short circuiting.
Consequence & remedy
Consequence: A short circuit increases the risk of a fire.
Remedy: MFTA will notify owners, and dealers will replace the PVC pipe heater, free of charge. The recall began on April 6, 2016. Owners may call MFTA customer service at 1-877-711-0707. MFTA's number for this recall is C1008310.
Dec 18, 2015
Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain model year 2012-2015 FEC52, FEC72, FEC92, and FGB72 trucks manufactured April 8, 2011, to July 22, 2014. The affected vehicles have a fuel return hose that may deteriorate due to being exposed to chemicals or lubricants, causing the hose to swell and detach.
Consequence & remedy
Consequence: If the fuel hose detaches a fuel leak may result, increasing the risk of a fire.
Remedy: MFTA will notify owners, and dealers will inspect the fuel return hose, replacing it with an improved hose, as necessary, free of charge. The recall began on February 15, 2016. Owners may call MFTA customer service at 1-877-711-0707. MFTA's number for this recall is C1008210.
Aug 11, 2015
Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain model year 2012-2016 FEC52 vehicles manufactured February 3, 2011, to March 31, 2015, and 2012-2013 FEC72 and FEC92 vehicles manufactured February 3, 2011, to January 9, 2013. The affected vehicles have brake pad shims that may rust or corrode after exposure to snow and ice melting chemicals that have been applied to roadways.
Consequence & remedy
Consequence: Rust or corrosion will result in swelling of the shims causing an increased brake pedal stroke. The extra brake travel may lengthen the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy: MFTA will notify owners, and dealers will replace any steel brake pad shims with stainless steel shims, free of charge. The recall began on October 6, 2015. Owners may call MFTA customer service at 1-877-711-0707. MFTA's number for this recall is C1008010.
Apr 1, 2015
Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain model year 2014-2015 FEC72 vehicles manufactured November 8, 2013, to January 28, 2014, and 2012-2015 FEC92 vehicles manufactured April 22, 2011, to February 1, 2014. On the affected vehicles, the lower engine timing chain bolt may have been insufficiently tightened during assembly.
Consequence & remedy
Consequence: A timing chain bolt that was not properly tightened may result in an engine oil leak, possibly causing the engine to seize, increasing the risk of a crash.
Remedy: MFTA will notify owners, and dealers will tighten the lower engine timing chain bolt to the proper torque, free of charge. The recal is expected to begin in late June 2015. Owners may call MFTA customer service at 1-877-711-0707. MFTA's number for this recall C1007710.
Sep 29, 2014
Mitsubishi Fuso Truck of America, Inc. (Mitsubishi Fuso) is recalling certain model year 2012-2015 FEC52, FEC72, FEC92, and FGB72 trucks manufactured April 8, 2011, to April 18, 2014. The automatic transmission fluid (ATF) oil cooler hose may burst.
Consequence & remedy
Consequence: If the hose bursts, the ATF would leak out. Once a significant amount of fluid is lost, the transmission may become inoperative, increasing the risk of a crash.
Remedy: Mitsubishi Fuso will notify owners, and dealers will replace any affected ATF oil cooler hoses, free of charge. The recall began on November 26, 2014. Owners may contact Mitsubishi Fuso customer service at 1-877-711-0707. Mitsubishi Fuso's number for this recall is C1007010.
Feb 10, 2014
Mitsubishi Fuso Truck of America, Inc. (Mitsubishi Fuso) is recalling certain model year 2012-2014 FEC52, FEC72, FEC92 and FGB72 trucks. In the affected vehicles, the transmission may not have been cleaned sufficiently during manufacturing, allowing debris to contaminate the automatic transmission fluid (ATF).
Consequence & remedy
Consequence: Contaminated ATF may cause the transmission to become inoperative resulting in engine stalling, increasing the risk of a crash.
Remedy: Mitsubishi Fuso will notify owners, and dealers will inspect the transmission, flush the system twice and refill it with new ATF or replace the transmission assembly as necessary, free of charge. The recall began on April 7, 2014. Owners may contact Mitsubishi Fuso at 1-856-467-4500.
Nov 6, 2012
Mitsubishi Fuso Truck of America (MFTA) is recalling certain model year 2012-2013 FEC52, FEC72, FEC92, and FGB72 trucks; manufactured from April 8, 2011, through October 16, 2012. The parking brake cable nut may have been insufficiently tightened during assembly. As a result, the parking brake cable could loosen with each operation of the parking brake.
Consequence & remedy
Consequence: Continued use of the parking brake could result in the inability for it to hold the vehicle stationary. This may lead to a truck rollaway increasing the risk of pedestrian injury or a vehicle crash.
Remedy: MFTA will notify owners, and dealers will inspect and tighten the parking brake nut, free of charge. The safety recall began on December 19, 2012. Owners may contact MFTA at 1-856-467-4500.
Oct 25, 2012
Mitsubishi Fuso Truck of America (MFTA) is recalling certain model year 2012-2013 FEC52, FEC72, FEC92, and FGB72 trucks. The fuel line may disconnect from the fuel filter head due to an improperly machined connector.
Consequence & remedy
Consequence: As the fuel line loosens and detaches it may leak fuel. Leaking fuel in the presence of an ignition source such as high temperature components may increase the risk of a fire.
Remedy: MFTA will notify owners, and dealers will inspect and replace the affected fuel filter head, free of charge. The safety recall began on December 19, 2012. Owners may contact MFTA at 1-856-467-4500.
Aug 31, 2012
Mitsubishi Fuso Truck of America (MFTA) is recalling certain model year 2012 FGB72 and model year 2012-2013 FEC52, FEC72, FEC92 trucks. The low pressure fuel return hose and filter may have been improperly routed at the hose clamp near the filter. This could allow the fuel hose to slip off of the filter, causing a fuel leak.
Consequence & remedy
Consequence: Leaking fuel in the presence of an ignition source may increase the risk of a fire.
Remedy: MFTA will notify owners, and dealers will correct the hose and filter routing and add a clip to the fuel return hose, free of charge. The safety recall began on October 19, 2012. Owners may contact MFTA at 1-856-467-4500.
Feb 16, 2012
MITSUBISHI FUSO (MFTA) IS RECALLING CERTAIN MODEL YEAR 2012 FEC52, FEC72, AND FEC92 TRUCKS MANUFACTURED FROM FEBRUARY 10, 2011, THROUGH APRIL 8, 2011, FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208 OCCUPANT CRASH PROTECTION. DURING ASSEMBLY, INCORRECT PASSENGERS SIDE SEAT BELT BUCKLES WERE INSTALLED. THE PASSENGERS SIDE SEAT BELT TONGUE WILL NOT ENGAGE ITS BUCKLE CORRECTLY.
Consequence & remedy
Consequence: FAILURE OF THE SEAT BELT BUCKLE TO ENGAGE CORRECTLY INCREASES THE RISK OF PASSENGER INJURY OR DEATH.
Remedy: MFTA WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE PASSENGERS SIDE SEAT BELT BUCKLE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 12, 2012. OWNERS MAY CONTACT MFTA AT 1-856-467-4500.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE15009 · Extended Stopping Distance
Opened Mar 23, 2015 · Closed Sep 9, 2015
Status: closed (inferred from source dates) · Service Brakes; Service Brakes, Hydraulic; Service Brakes, Hydraulic:foundation Components:disc:caliper; Service Brakes, Hydraulic:foundation Components:disc:pads ; Service Brakes, Hydraulic:foundation Components:disc:rotor; Service Brakes, Hydraulic:pedals And Linkages
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Additional source detail variants (6)
Service Brakes, Hydraulic:foundation Components:disc:caliper
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Service Brakes, Hydraulic:foundation Components:disc:pads
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Service Brakes, Hydraulic:foundation Components:disc:rotor
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Service Brakes, Hydraulic
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Service Brakes, Hydraulic:pedals And Linkages
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Service Brakes
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
Illustration