When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
8Dec 15, 2025
Mack Trucks, Inc. (Mack) is recalling certain 2010-2016 Granite (GU) trucks. Vehicles remedied under Recall 15V804 (SC0398) may have had incorrect parts installed during subsequent repairs. The incorrect parts may cause a brake imbalance between the steer and drive axle brakes and the rear brakes to overheat.
Consequence & remedy
Consequence: Overheated brakes may cause a tire blowout or fire, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the brake chambers as necessary, free of charge. Owner letters were mailed April 14, 2026. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0491. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning December 22, 2025. Owners who received a remedy under Recall 15V804 (SC0398) must have the new remedy completed.
Aug 25, 2023
Mack Trucks, Inc. (Mack) is recalling certain 2015-2023 GU and GR vehicles. The turn signals may be positioned incorrectly, reducing their visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: Low turn signal visibility may not alert other drivers to a turning vehicle, increasing the risk of a crash.
Remedy: Dealers will add additional turn signal lighting, free of charge. Owner letters were mailed September 25, 2024. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0448.
Feb 19, 2016
Mack Trucks, Inc. (Mack) is recalling certain model year 2016-2017 Granite (GU) and TerraPro (MRU) trucks manufactured from November 9, 2015, through January 19, 2016. The affected trucks may be missing a roll pin to secure the upper steering yoke to the steering shaft.
Consequence & remedy
Consequence: If the roll pin is missing, the steering shaft may disconnect from the yoke, resulting in a complete loss of steering and increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will inspect the vehicles and replace the steering shaft if the roll pin is missing, free of charge. The recall began on April 1, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0400.
Feb 19, 2016
Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
Consequence & remedy
Consequence: If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.
Nov 30, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite 4X2 trucks manufactured September 17, 2009, to July 31, 2015. Due to a brake imbalance between the steer and drive axle brakes, the rear brakes may overheat.
Consequence & remedy
Consequence: If the rear brakes overheat there would be an increased risk of a tire blowout or a wheel-end fire.
Remedy: Mack will notify owners, and dealers will replace either the brake chambers on the steer axles or the drive axles to correct the imbalance, free of charge. The recall began on January 27, 2016. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0398.
Oct 26, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2010-2016 Granite (GU), LR, and TerraPro (LEU, MRU) trucks manufactured November 17, 2009 to October17, 2015. The affected trucks have engines with a turbocharger oil supply line that may contact or interfere with the turbocharger inlet elbow, clean air intake clamp, or the air fuel control tube, and result in an oil leak.
Consequence & remedy
Consequence: If the turbocharger oil supply line oil leaks in the proximity of the engine exhaust manifold there would be an increased risk of a fire.
Remedy: Cummins will notify owners on behalf of Mack, and dealers will inspect for oil supply line interference or damage, eliminating the interference and replacing the oil supply line, as necessary, free of charge. The recall is expected to begin November 30, 2015. Owners may contact Cummins at 1-800-343-7357 or Mack customer service at 1-800-866-1177. Cummins' number for this recall is SC0396.
Aug 18, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2016 Granite (GU) trucks manufactured September 24, 2011, to July 1, 2015. The affected trucks may be equipped with an air brake system reservoir that does not have a sufficient volume. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Consequence & remedy
Consequence: If the air brake system reservoir has as insufficient volume, braking performance may be affected, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will add additional air brake reservoir volume, free of charge. The recall began on October 15, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0394.
Aug 17, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.
Consequence & remedy
Consequence: If the electrical cables and air lines were to fall and get tangled in the driveline, it could affect the electrical system and braking system, increasing the risk of a vehicle crash.
Remedy: Mack will notify owners, and dealers will inspect the vehicles and properly clip the harness and air lines, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0393.
Additional source detail variants (2)
Electrical System:wiring
Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.
Consequence: If the electrical cables and air lines were to fall and get tangled in the driveline, it could affect the electrical system and braking system, increasing the risk of a vehicle crash.
Remedy: Mack will notify owners, and dealers will inspect the vehicles and properly clip the harness and air lines, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0393.
Service Brakes, Air:supply:hoses, Lines/piping, And Fittings
Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.
Consequence: If the electrical cables and air lines were to fall and get tangled in the driveline, it could affect the electrical system and braking system, increasing the risk of a vehicle crash.
Remedy: Mack will notify owners, and dealers will inspect the vehicles and properly clip the harness and air lines, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0393.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE20005 · Mdrive Transmission Failure To Disengage
Opened Apr 28, 2020 · Closed Apr 4, 2022
Status: closed (inferred from source dates) · Power Train:manual Transmission
On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.
Illustration