2019 Jeep Cherokee

While driving on the highway, the vehicle suddenly lost power to the wheels although the engine continued to run. This caused me to coast to a safe area to await a tow. The PTU was replaced under the Jeep recall in 2020. Recently the service 4WD light came on and I took it to a dealer for diagnosis. I was advised that there was an issue with the replacement PTU. As this is a drive line component, I believe it was a defective replacement part. I contacted Jeep about this issue and was told the part would not be replaced by the OEM because it had previously been replaced under recall. I was also assured the vehicle was safe to drive and the part would only impede the use of 4WD. This proved not to be true, and the sudden catastrophic failure of the part caused a very unsafe event in my case. If the replacement PTUs are defective in some portion of Jeeps repaired under this recall, then there may be many Jeep drivers suddenly losing power on the highway as those parts begin to fail prematurely. I believe this issue is worthy of your agency's attention for that reason, especially if the manufacturer believes the vehicles are safe to drive with a failed PTU and advises customers based on that understanding.

1. Component/system failed: PTU 2. My vehicle completely shut off and became disabled while driving - this put my safety and the safety of others at risk. 3. The problem was confirmed at the dealership. 4. The vehicle has been inspected by certified mechanics at the dealership. 5. There were no prior warning lights or signs/symptoms of the problem before failure.

The uConnect Panel system malfunctioned and was attempting to contact emergency services while I was driving, in addition to opening other apps on the system and rotating to the back camera while driving at high speeds on a highway. This is a common issue that I am reading about and is not safe and Jeep needs to fix this issue. Had there been more cars on the road, I could have easily been in an accident because it was alarming and I wasn't sure what was happening to my car. I drove straight to a service station and had them come see what was happening before turning it off so I could try and figure out a solution. I am also happy my children were not in the car. I have contacted the dealer but they have not returned my call and I do not think this cost should be put on the consumer when this is not a regular maintenance issue and is so common of a concern among consumers. It also appears that there have been other complaints in previous years, yet no one is considering the panic it causes drivers and the potential of major accidents.

PCM fails intermittently. Dealership is replacing it and has the defective one. Safety is definitely an issue because the vehicle stalls without adequate time to pull off of the road. Unable to move it off the road because it does not engage the transmission. Dealer has been able to replicate and confirmed the problem. Component has not been inspected by anyone other than the mechanic at the dealership. Several warning lights go off just as the problem occurs but not in time to get out of unsafe situations. Recall #18V524000 on 8/8/2018 covers the problem I am experiencing but my vehicle is not in the VIN series covered by the recall. I strongly believe the series my car belongs to should be included. This is a safety issue.

After starting vehicle, was running very rough - engine light came on flashing and Electronic Throttle Control light. Towed vehicle to dealership and was told "Dead miss on cylinder #2, plug and coil fouled, no compression on cylinder #2 - needs motor replacement". Dealer was not returning calls, called Jeep and currently waiting to hear how they will handle. Warranty expired 11/23 but vehicle only has 48,000 miles. Internet search indicates this is a common problem with this vehicle (4 cyl turbo) - should be recalled as obvious defect. Vehicle has been at dealer over a week and no one is willing to help with loaner or rental car.

Delamination of the main screen that houses the control panel for the vehicle. After much research, this is a common failure on the Chrysler vehicles. This delamination is caused the radio to rapidly switch through all the buttons which is extremely distracting. With it turned off, all features are visibly unavailable. This should be a recall. As a car manufacturer, having settings that affect the way the vehicle physically brakes and steers that are configured via the Uconnect system, and that system has a defect that can cause those settings to change without the knowledge of the user, that’s a safety issue.

The contact owned a 2019 Jeep Cherokee. The contact stated that after accelerating at 10 MPH from a stop sign, another oncoming vehicle ran the stop sign causing a T-bone collision. The contact's vehicle had front cosmetic damages. The air bags did not deploy. The Forward Collison Warning failed to activate and the display failed to indicate there was a vehicle too close. A police report was filed. There were no injuries reported. A driver and her child involved in the other vehicle sustained unknown injuries and received medical attention. The vehicle was towed to the contact's residence. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown.

The contact owns a 2019 Jeep Cherokee. The contact stated that while driving at an undisclosed speed, the 4WD inoperable warning light illuminated. The vehicle was taken to the dealer where it was diagnosed with a failed power transfer unit (PTU). The contact was informed that the power transfer unit needed to be replaced. The contact was informed that the part was on backorder. The vehicle was not repaired. The contact was informed of an unknown recall with a similar failure; however, the VIN was not associated with the recall. The manufacturer was made aware of the failure. The failure mileage was approximately 65,000.