IllustrationGear selector sticks at start-up and doesn't raise up to engage the car out of park. Have turn off the vehicle and re-start for the gear selector to raise. Trunk hatch will sometimes raise only part-way. Interior light panels for trunk button do not illuminate.
2017 Jaguar F-PACE
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all F-PACE years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
150–25K
725–50K
250–75K
575–100K
2100–150K
0150K+
31 reports with mileage · 32 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine. Review the 33 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 11 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel/propulsion System. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
3 crash reports2 fire reports2 injury reports
Structure complaints
2 reportsTHE REAR TAILPIPES PROTRUDE BEYOND THE REAR BUMPER COVER WHICH CAUSES BURNS WHEN LOADING/UNLOADING CARGO FROM THE REAR COMPARTMENT. THERE IS A TENDENCY TO LEAN AGAINST THE REAR COVER WHEN LOADING/UNLOADING CARGO THUS COMING INTO CONTACT WITH THE TAILPIPES. VEHICLE WAS STATIONARY, PARKED AND RECENTLY TUNED OFF.
Official recalls
418V052000 · Electrical System: Instrument Cluster/panel; Electrical System:software
Jan 12, 2018
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2017-2018 F-Pace vehicles. The Instrument Cluster (IC) may intermittently go blank.
Consequence & remedy
Consequence: A blank instrument cluster will not show important information like vehicle speed, increasing the risk of a crash.
Remedy: Jaguar will notify owners, and dealers will update the vehicle software, free of charge. The recall began on February 16, 2018. Owners may contact Jaguar customer service at 1-800-452-4827. Note: This recall expands the scope of vehicles recalled under 17V-678. Jaguar's number for this recall is H056.
Additional source detail variants (2)
Electrical System:software
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2017-2018 F-Pace vehicles. The Instrument Cluster (IC) may intermittently go blank.
Consequence: A blank instrument cluster will not show important information like vehicle speed, increasing the risk of a crash.
Remedy: Jaguar will notify owners, and dealers will update the vehicle software, free of charge. The recall began on February 16, 2018. Owners may contact Jaguar customer service at 1-800-452-4827. Note: This recall expands the scope of vehicles recalled under 17V-678. Jaguar's number for this recall is H056.
Electrical System: Instrument Cluster/panel
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2017-2018 F-Pace vehicles. The Instrument Cluster (IC) may intermittently go blank.
Consequence: A blank instrument cluster will not show important information like vehicle speed, increasing the risk of a crash.
Remedy: Jaguar will notify owners, and dealers will update the vehicle software, free of charge. The recall began on February 16, 2018. Owners may contact Jaguar customer service at 1-800-452-4827. Note: This recall expands the scope of vehicles recalled under 17V-678. Jaguar's number for this recall is H056.
17V678000 · Electrical System: Instrument Cluster/panel
Oct 26, 2017
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2017-2018 Jaguar XF and F-Pace, 2016-2017 Jaguar XJ and 2018 Jaguar XE vehicles. The instrument cluster (IC) may intermittently go blank.
Consequence & remedy
Consequence: A blank instrument cluster will not show important information like vehicle speed, increasing the risk of a crash.
Remedy: Jaguar will notify owners, and dealers will update the vehicle software, free of charge. The recall is expected to begin December 19, 2017. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is H056.
17V491000 · Fuel System, Gasoline:delivery:fuel Pump
Aug 4, 2017
Jaguar Land Rover North America, LLC (Jaguar) is recalling one 2017 Jaguar F-PACE vehicle equipped with a 3.0L engine. A bolt used to attach the high pressure fuel pump may be too long. As a result, the fuel pump may not be properly secured and the fuel line may crack and leak.
Consequence & remedy
Consequence: A fuel line crack may leak fuel into the engine compartment, increasing the risk of a fire.
Remedy: Jaguar will notify the owner, and a dealer will replace both fuel pumps and the associated fuel lines, free of charge. The recall began September 12, 2017. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is H039.
17V153000 · Power Train:driveline:driveshaft
Mar 9, 2017
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2017 Jaguar F-PACE vehicles equipped with automatic transmissions. These vehicles may have been built with a rear driveshaft that is too short, potentially resulting the driveshaft separating from the vehicle.
Consequence & remedy
Consequence: If the driveshaft detaches, a loss of drive power would result, increasing the risk of a crash.
Remedy: Jaguar will notify owners, and dealers will inspect the driveshafts, replacing any that are incorrect, free of charge. The recall began May 1, 2017. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is H009.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.