I was driving across a major intersection when the car slammed on the brakes for no reason. There were no shadows. I was not under a bridge. It is an overcast day. No direct sun. My safety was at risk because I could have been hit by oncoming traffic when I was trying to go forward.
COMPONENT SPOTLIGHT
Honda CR-V electrical problems
2,486 distinct owner reports with an electrical-system component in this snapshot.
Includes the electrical-system component and its detailed subcategories. Related recalls and investigations must also name this component; they are not linked by narrative keyword alone.
49 crash reports70 fire reports33 injury reports
Reports by model year
YearTopic reportsRecallsInvestigations
202623
00202518
10202434
21202327
31202214
32202134
42202043
722019160
832018281
532017398
72201664
31201583
32201477
12201338
22201268
33201155
130201043
150200944
1202008218
1102007264
120200675
125200577
126200473
127200362
138200295
15820017
10200015
20199927
30199838
30199731
20Recall and investigation columns show each year’s full history. A report naming several years can appear in more than one row.
When problems were reported
Mileage at the reported incident
4660–25K
24825–50K
23650–75K
19175–100K
195100–150K
141150K+
1,477 reports with mileage · 1,009 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What owners actually said
2,486 reportsDashboard lights not operating. Gear shifter locked Nav unit works, blinkers work, brake lights work, seat warmers work, car starts. It has been suggested to us that the brake light switch might be bad. We’re told this is a common problem with 2019 CRVs.
The infotainment display on my [2025/2026] Honda CR-V became stuck in an extremely dim state during daylight hours. While the menus, maps, and settings were nearly illegible, the backup camera continued to display at full, normal brightness when shifted into Reverse. I attempted a full system reboot (holding the power/volume kno…
Read full complaint
The infotainment display on my [2025/2026] Honda CR-V became stuck in an extremely dim state during daylight hours. While the menus, maps, and settings were nearly illegible, the backup camera continued to display at full, normal brightness when shifted into Reverse. I attempted a full system reboot (holding the power/volume knob) and adjusted the physical brightness dial on the instrument cluster, but the screen remained locked in the dim state. The system did not return to normal functionality until the vehicle was parked and shut off overnight. This indicates a deep software logic error that resists manual resets and only clears after a prolonged power-down cycle. This failure resulted in a significant safety hazard. The dimness rendered the navigation system unusable, causing extreme driver distraction as I had to take my eyes off the road to attempt to read the screen. The unpredictable nature of this glitch means it could recur at any time, potentially disabling access to critical vehicle safety information or navigation during transit. I performed a manual software reboot and cycled the ignition multiple times, yet the screen remained dim. The hardware clearly had the capacity for full brightness (as evidenced by the backup camera), but the software refused to restore daytime levels for any other function until the car performed a "deep sleep" cycle overnight.
I was driving the vehicle when all of a sudden all of the lights appeared on the dashboard.i took it in to the dealership and was told it was due to PO172 code.
While operating a 2020 Honda CR-V Hybrid, the vehicle suddenly caught fire with flames originating from the rear seat/rear passenger compartment area. There was no crash involved. Smoke and flames rapidly spread inside the vehicle, creating an immediate safety hazard and risk of serious injury. I evacuated immediately and emerge…
Read full complaint
While operating a 2020 Honda CR-V Hybrid, the vehicle suddenly caught fire with flames originating from the rear seat/rear passenger compartment area. There was no crash involved. Smoke and flames rapidly spread inside the vehicle, creating an immediate safety hazard and risk of serious injury. I evacuated immediately and emergency services were contacted. The fire department responded and extinguished the fire. The vehicle sustained severe fire damage and was declared a total loss. The fire appeared to start from inside the cabin near/under the rear seating area. The incident occurred without warning and there were no prior signs of mechanical issues immediately before the fire. This failure put the safety of the occupants and the public at risk due to the sudden and aggressive nature of the fire. The vehicle is currently in storage and remains available for inspection upon request by the manufacturer, insurer, or investigators.
Vehicle was parked on a slight incline with transmission in Park and electronic parking brake engaged. Engine was running. While unloading groceries, driver leaned into vehicle and pressed the engine start/stop button to turn the vehicle off. Immediately after engine shutoff, the vehicle began rolling backward. Driver attempted …
Read full complaint
Vehicle was parked on a slight incline with transmission in Park and electronic parking brake engaged. Engine was running. While unloading groceries, driver leaned into vehicle and pressed the engine start/stop button to turn the vehicle off. Immediately after engine shutoff, the vehicle began rolling backward. Driver attempted to re-engage Park and electronic parking brake multiple times without effect. Vehicle continued rolling for approximately 20–30 seconds before stopping. Driver’s foot was run over by the vehicle, resulting in injury. No warning messages were observed prior to the incident. Cause unknown. Vehicle remains available for inspection.
When it rains, back up camera footage becomes hazy, unclear, blurred, unreadable- cause rain water falls on to the rear camera. So backing up becomes very difficult and unsafe, when it rains. Can’t see clearly what’s behind of the car. This is a serious safety issue.
This is a new vehicle with around 800 miles purchased in early December, 2025. I started the vehicle and let it warm up at least 10 minutes. I was able to drive to my destination around 5 miles from home. 20 minutes later when I planned to drive home, many dashboard lights came on with some flashing and one beeping. Vehicle s…
Read full complaint
This is a new vehicle with around 800 miles purchased in early December, 2025. I started the vehicle and let it warm up at least 10 minutes. I was able to drive to my destination around 5 miles from home. 20 minutes later when I planned to drive home, many dashboard lights came on with some flashing and one beeping. Vehicle started but was cold and limp. Would not accelerate beyond around 20 mph. Had to drive home with flashers on. Based on reading, it may be caused by an inadequate 12v battery. Have service appt at Honda dealer on 1/26/2026. Talked to Wilde Honda service dept. staff immediately after incident, and they mentioned that they had recently seen other CRV hybrid vehicles with multiple warning lights. I scheduled a service appt for 1/26/2026 but am concerned about driving safely to dealership.
During a cold spell in my city my brand new Honda Crv Hybrid had difficulty starting and major warning signal appeared on the dash. We took it to the dealer of purchase but they are giving us difficulties replacing the low voltage battery that doesn't work in this climate! When looked up reviews on this car the websites of poor …
Read full complaint
During a cold spell in my city my brand new Honda Crv Hybrid had difficulty starting and major warning signal appeared on the dash. We took it to the dealer of purchase but they are giving us difficulties replacing the low voltage battery that doesn't work in this climate! When looked up reviews on this car the websites of poor battery performance in cold weather areas are numerous.
Impact on the driver side from another vehicle caused it to be totaled but not a single airbag deployed.
Related Official recalls
820V768000 · Electrical System; Visibility:power Window Devices And Controls
Dec 10, 2020
Honda (American Honda Motor Co.) is recalling certain 2002-2006 CR-V vehicles. Moisture may enter the driver side power window master switch, causing the switch to fail or melt.
Consequence & remedy
Consequence: If the switch fails, it could overheat and smoke, increasing the risk of a fire.
Remedy: Honda will notify owners, and dealers will replace the power window master switch and inspect the wiring harness for damage, replacing it if necessary, free of charge. The recall began January 29, 2021. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is P9D.
Additional source detail variants (2)
Visibility:power Window Devices And Controls
Honda (American Honda Motor Co.) is recalling certain 2002-2006 CR-V vehicles. Moisture may enter the driver side power window master switch, causing the switch to fail or melt.
Consequence: If the switch fails, it could overheat and smoke, increasing the risk of a fire.
Remedy: Honda will notify owners, and dealers will replace the power window master switch and inspect the wiring harness for damage, replacing it if necessary, free of charge. The recall began January 29, 2021. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is P9D.
Electrical System
Honda (American Honda Motor Co.) is recalling certain 2002-2006 CR-V vehicles. Moisture may enter the driver side power window master switch, causing the switch to fail or melt.
Consequence: If the switch fails, it could overheat and smoke, increasing the risk of a fire.
Remedy: Honda will notify owners, and dealers will replace the power window master switch and inspect the wiring harness for damage, replacing it if necessary, free of charge. The recall began January 29, 2021. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is P9D.
19V383000 · Air Bags:frontal:driver Clockspring/spiral Cassette; Air Bags:frontal:driver Side:inflator Module; Electrical System:horn; Steering: Steering Wheel/handle Bar
May 21, 2019
Honda (American Honda Motor Co.) is recalling certain 2019 CR-V vehicles. The metal core of the steering wheel may have burrs which can damage the harnesses routed within, potentially disabling the driver's air bag or causing it to deploy without warning.
Consequence & remedy
Consequence: In the event of a crash, a disabled air bag would increase the risk of injury. An uncommanded deployment of the driver's air bag also increases the risk of injury and a crash.
Remedy: Honda will notify owners, and dealers will install a protective cover on the steering wheel core and replace clockspring and the harnesses within, free of charge. The recall began July 8, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is R4S.
Additional source detail variants (4)
Air Bags:frontal:driver Clockspring/spiral Cassette
Honda (American Honda Motor Co.) is recalling certain 2019 CR-V vehicles. The metal core of the steering wheel may have burrs which can damage the harnesses routed within, potentially disabling the driver's air bag or causing it to deploy without warning.
Consequence: In the event of a crash, a disabled air bag would increase the risk of injury. An uncommanded deployment of the driver's air bag also increases the risk of injury and a crash.
Remedy: Honda will notify owners, and dealers will install a protective cover on the steering wheel core and replace clockspring and the harnesses within, free of charge. The recall began July 8, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is R4S.
Electrical System:horn
Honda (American Honda Motor Co.) is recalling certain 2019 CR-V vehicles. The metal core of the steering wheel may have burrs which can damage the harnesses routed within, potentially disabling the driver's air bag or causing it to deploy without warning.
Consequence: In the event of a crash, a disabled air bag would increase the risk of injury. An uncommanded deployment of the driver's air bag also increases the risk of injury and a crash.
Remedy: Honda will notify owners, and dealers will install a protective cover on the steering wheel core and replace clockspring and the harnesses within, free of charge. The recall began July 8, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is R4S.
Air Bags:frontal:driver Side:inflator Module
Honda (American Honda Motor Co.) is recalling certain 2019 CR-V vehicles. The metal core of the steering wheel may have burrs which can damage the harnesses routed within, potentially disabling the driver's air bag or causing it to deploy without warning.
Consequence: In the event of a crash, a disabled air bag would increase the risk of injury. An uncommanded deployment of the driver's air bag also increases the risk of injury and a crash.
Remedy: Honda will notify owners, and dealers will install a protective cover on the steering wheel core and replace clockspring and the harnesses within, free of charge. The recall began July 8, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is R4S.
Steering: Steering Wheel/handle Bar
Honda (American Honda Motor Co.) is recalling certain 2019 CR-V vehicles. The metal core of the steering wheel may have burrs which can damage the harnesses routed within, potentially disabling the driver's air bag or causing it to deploy without warning.
Consequence: In the event of a crash, a disabled air bag would increase the risk of injury. An uncommanded deployment of the driver's air bag also increases the risk of injury and a crash.
Remedy: Honda will notify owners, and dealers will install a protective cover on the steering wheel core and replace clockspring and the harnesses within, free of charge. The recall began July 8, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is R4S.
12V486000 · Electrical System; Visibility:power Window Devices And Controls
Oct 5, 2012
Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.
Consequence & remedy
Consequence: If the switch fails, it could overheat, smoke, and cause a fire. A switch failure, and a fire, could occur even if the vehicle is not in use. As a precaution, owners are advised to park outside until the recall repair has been performed.
Remedy: Honda will notify owners, and dealers will inspect and repair the switches, as necessary, free of charge. The safety recall began on November 2, 2012. Owners may contact Honda at 1-800-999-1009.
Additional source detail variants (2)
Visibility:power Window Devices And Controls
Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.
Consequence: If the switch fails, it could overheat, smoke, and cause a fire. A switch failure, and a fire, could occur even if the vehicle is not in use. As a precaution, owners are advised to park outside until the recall repair has been performed.
Remedy: Honda will notify owners, and dealers will inspect and repair the switches, as necessary, free of charge. The safety recall began on November 2, 2012. Owners may contact Honda at 1-800-999-1009.
Electrical System
Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.
Consequence: If the switch fails, it could overheat, smoke, and cause a fire. A switch failure, and a fire, could occur even if the vehicle is not in use. As a precaution, owners are advised to park outside until the recall repair has been performed.
Remedy: Honda will notify owners, and dealers will inspect and repair the switches, as necessary, free of charge. The safety recall began on November 2, 2012. Owners may contact Honda at 1-800-999-1009.
11V456000 · Electrical System
Sep 7, 2011
HONDA IS RECALLING CERTAIN MODEL YEAR 2006 CR-V PASSENGER CARS MANUFACTURED FROM OCTOBER 3, 2005, THROUGH JULY 21, 2006. THE DRIVER-SIDE POWER WINDOW SWITCH MAY FAIL OR MELT.
Consequence & remedy
Consequence: IF THE SWITCH FAILS, THE POWER WINDOWS MAY BECOME INOPERATIVE PREVENTING THEM FROM BEING ROLLED UP OR DOWN. IF THE SWITCH MELTS, IT WILL PRODUCE SMOKE AND A FIRE COULD OCCUR.
Remedy: HONDA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE DRIVER SIDE POWER WINDOW SWITCH ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT OCTOBER 5, 2011. OWNERS MAY CONTACT HONDA AUTOMOBILE CUSTOMER SERVICE AT 1-800-999-1009.
11V004000 · Electrical System
Jan 6, 2011
HONDA IS RECALLING CERTAIN MODEL YEAR 2010 HONDA ACCORD AND CR-V VEHICLES. THERE IS A POTENTIAL FAILURE WITH THE ENGINE WIRING HARNESS CONNECTOR WHICH MAY CAUSE INTERMITTENT SPARK FIRING OR THE ENGINE TO STALL.
Consequence & remedy
Consequence: AN ENGINE STALL WILL INCREASE THE RISK OF A CRASH.
Remedy: DEALER WILL INSPECT AND REPLACE THE IGNITION WIRING HARNESS CONNECTOR FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JANUARY 24, 2011. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
03V422000 · Electrical System:ignition:switch
Oct 27, 2003
ON CERTAIN SPORT UTILITY VEHICLES, METAL PARTICLES IN THE KEY CYLINDER BODY COULD INTERFERE WITH THE INTERLOCK LEVER OPERATION, MAKING IT POSSIBLE TO REMOVE THE IGNITION KEY WITHOUT SHIFTING THE TRANSMISSION TO "PARK."
Consequence & remedy
Consequence: IF THE VEHICLE OPERATOR DOES NOT SHIFT TO "PARK" BEFORE REMOVING THE KEY AND FAILS TO ENGAGE THE PARKING BRAKE, THE VEHICLE COULD ROLL AND A CRASH COULD OCCUR.
Remedy: DEALERS WILL INSPECT AND TEST IGNITION SWITCHES FOR CONTAMINATION INTERFERENCE. ANY SWITCHES THAT FAIL THE TEST WILL BE REPAIRED. OWNER NOTIFICATION BEGAN ON NOVENBER 3, 2003. OWNERS SHOULD CONTACT HONDA AT 1-800-999-1009.
02V120000 · Electrical System:ignition:switch
May 16, 2002
ON CERTAIN SEDANS, COUPES, HATCHBACKS, AND SPORT UTILITY VEHICLES, ELECTRICAL CONTACTS IN THE IGNITION SWITCH CAN DEGRADE DUE TO THE HIGH ELECTRICAL CURRENT PASSING THROUGH THE SWITCH WHEN THE VEHICLE IS STARTED.
Consequence & remedy
Consequence: WORN CONTACTS COULD CAUSE THE ENGINE TO STALL WITHOUT WARNING, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE IGNITION SWITCH. OWNER NOTIFICATION BEGAN JUNE 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009 OR ACURA AT 1-800-382-2238.
99V282000 · Electrical System:wiring:interior/under Dash
Oct 19, 1999
VEHICLE DESCRIPTION: PASSENGER VEHICLES. AN IMPROPERLY ROUTED UNDER DASH WIRE HARNESS COULD BE DAMAGED BY CONTACT WITH THE BRAKE LIGHT SWITCH, POSSIBLY RESULTING IN A BLOWN FUSE. IF THIS OCCURS, OPERATION OF A CRITICAL COMPONENT CAN BE LOST, INCLUDING WINDSHIELD WIPERS, HEADLIGHTS, TURN SIGNAL AND HAZARD LAMPS, TAIL LAMPS, THE ANTI-LOCKING FUNCTION OF THE BRAKES, AND BATTERY CHARGING SYSTEM.
Consequence & remedy
Consequence: A SUDDEN, UNEXPECTED LOSS OF LIGHTING OR A FAILURE OF THE WINDSHIELD WIPERS IN BAD WEATHER, COULD BE HAZARDOUS INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSTALL A 70MM PROTECTIVE, CORRUGATED PLASTIC TUBE OVER THE WIRE HARNESS, IN THE AREA OF THE BRAKE STOP SWITCH. IF ANY WIRE OR WIRES ARE DAMAGED, THEY WILL BE REPAIRED.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Related NHTSA investigations
6EA11012 · Low Beam Headlights Stop Illuminating
Opened Sep 12, 2011 · Closed Sep 17, 2012
Status: closed (inferred from source dates) · Electrical System:wiring:interior/under Dash; Exterior Lighting:headlights; Exterior Lighting:headlights:high/low Beam Dimmer Switch; Exterior Lighting:headlights:switch
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Additional source detail variants (4)
Electrical System:wiring:interior/under Dash
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Exterior Lighting:headlights:high/low Beam Dimmer Switch
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Exterior Lighting:headlights
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Exterior Lighting:headlights:switch
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
PE11017 · Low Beam Headlights Stop Working
Opened Apr 29, 2011 · Closed Sep 23, 2011
Status: closed (inferred from source dates) · Electrical System:wiring:interior/under Dash; Exterior Lighting:headlights; Exterior Lighting:headlights:high/low Beam Dimmer Switch; Exterior Lighting:headlights:switch
The Office of Defects Investigation (ODI) opened this investigation based on 12 reports from consumers alleging the low beam headlights stopped working simultaneously.Several of the complainants reported that the headlight switch and/or its wiring harness connector required replacement to repair the low beam headlight circuit, and also reported that the switch and/or the wire harness connector were damaged from overheating.Based on information provided by Honda in response to ODI's Preliminary Evaluation information request, ODI is upgrading the investigation to EA11-012.
Additional source detail variants (4)
Electrical System:wiring:interior/under Dash
The Office of Defects Investigation (ODI) opened this investigation based on 12 reports from consumers alleging the low beam headlights stopped working simultaneously.Several of the complainants reported that the headlight switch and/or its wiring harness connector required replacement to repair the low beam headlight circuit, and also reported that the switch and/or the wire harness connector were damaged from overheating.Based on information provided by Honda in response to ODI's Preliminary Evaluation information request, ODI is upgrading the investigation to EA11-012.
Exterior Lighting:headlights:high/low Beam Dimmer Switch
The Office of Defects Investigation (ODI) opened this investigation based on 12 reports from consumers alleging the low beam headlights stopped working simultaneously.Several of the complainants reported that the headlight switch and/or its wiring harness connector required replacement to repair the low beam headlight circuit, and also reported that the switch and/or the wire harness connector were damaged from overheating.Based on information provided by Honda in response to ODI's Preliminary Evaluation information request, ODI is upgrading the investigation to EA11-012.
Exterior Lighting:headlights
The Office of Defects Investigation (ODI) opened this investigation based on 12 reports from consumers alleging the low beam headlights stopped working simultaneously.Several of the complainants reported that the headlight switch and/or its wiring harness connector required replacement to repair the low beam headlight circuit, and also reported that the switch and/or the wire harness connector were damaged from overheating.Based on information provided by Honda in response to ODI's Preliminary Evaluation information request, ODI is upgrading the investigation to EA11-012.
Exterior Lighting:headlights:switch
The Office of Defects Investigation (ODI) opened this investigation based on 12 reports from consumers alleging the low beam headlights stopped working simultaneously.Several of the complainants reported that the headlight switch and/or its wiring harness connector required replacement to repair the low beam headlight circuit, and also reported that the switch and/or the wire harness connector were damaged from overheating.Based on information provided by Honda in response to ODI's Preliminary Evaluation information request, ODI is upgrading the investigation to EA11-012.
EA11004 · Driver's Power Window Master Switch
Opened Apr 11, 2011 · Closed Oct 24, 2012
Status: closed (inferred from source dates) · Electrical System; Visibility:glass, Side/rear; Visibility:power Window Devices And Controls
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
Additional source detail variants (6)
Electrical System
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
Electrical System
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
Visibility:glass, Side/rear
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
Visibility:glass, Side/rear
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
Visibility:power Window Devices And Controls
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
Visibility:power Window Devices And Controls
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
PE10047 · Driver's Master Power Window Switch
Opened Nov 22, 2010 · Closed Apr 15, 2011
Status: closed (inferred from source dates) · Electrical System; Visibility:power Window Devices And Controls
This investigation was opened based on three Vehicle Owner's Questionnaire reports alleging smoke and fire occurred inside of the driver's door.The complainants reported that the master power window switch and, in some cases its wiring harness, had sustained heat related damage and required replacement.Since opening the investigation the Office of Defects Investigation (ODI) has received two additional reports.The reports provided by Honda in response to ODI's Information Request appear consistent with ODI's Vehicle Owner's Questionnaire reports. Based on the information provided by Honda in response to this preliminary evaluation and its ongoing analysis, the investigation will be upgraded to engineering analysis EA11-004 to further study the issue.
Additional source detail variants (2)
Electrical System
This investigation was opened based on three Vehicle Owner's Questionnaire reports alleging smoke and fire occurred inside of the driver's door.The complainants reported that the master power window switch and, in some cases its wiring harness, had sustained heat related damage and required replacement.Since opening the investigation the Office of Defects Investigation (ODI) has received two additional reports.The reports provided by Honda in response to ODI's Information Request appear consistent with ODI's Vehicle Owner's Questionnaire reports. Based on the information provided by Honda in response to this preliminary evaluation and its ongoing analysis, the investigation will be upgraded to engineering analysis EA11-004 to further study the issue.
Visibility:power Window Devices And Controls
This investigation was opened based on three Vehicle Owner's Questionnaire reports alleging smoke and fire occurred inside of the driver's door.The complainants reported that the master power window switch and, in some cases its wiring harness, had sustained heat related damage and required replacement.Since opening the investigation the Office of Defects Investigation (ODI) has received two additional reports.The reports provided by Honda in response to ODI's Information Request appear consistent with ODI's Vehicle Owner's Questionnaire reports. Based on the information provided by Honda in response to this preliminary evaluation and its ongoing analysis, the investigation will be upgraded to engineering analysis EA11-004 to further study the issue.
EA03018 · IGNITION-PARK Interlock System
Opened Sep 9, 2003 · Closed Nov 13, 2003
Status: closed (inferred from source dates) · Electrical System:ignition:switch; Power Train:automatic Transmission:lever And Linkage:column Shift; Steering:column LOCKING:ANTI-THEFT Device
ALL BUT ONE ODI COMPLAINT AND ALL ODI CRASHES ARE DUPLICATIVE OF HONDA REPORTS.ALL 7 CRASHES WERE ROLL-AWAY CRASHES THAT OCCURRED WHEN THE INTERLOCK SYSTEM MALFUNCTIONED AND THE VEHICLES WERE PARKED UNSECURED (NOT IN PARK, BRAKE NOT ENGAGED).THE 3 NOTED INJURIES WERE RELATIVELY MINOR.THE WARRANTY CLAIMS SHOWN UNDER OTHER WERE CONFIRMED BY HONDA AS INTERLOCK SYSTEM FAILURES.IN THE SUBJECT VEHICLE IGNITION-PARK INTERLOCK SYSTEM, AN ELECTRICALLY DRIVEN SOLENOID OPERATES A BLOCKING LEVER TO PREVENT IGNITION KEY REMOVAL WHEN THE SHIFT LEVER IS NOT IN THE PARK POSITION.ACCORDING TO HONDA, AN IGNITION SWITCH MANUFACTURING OPERATION COULD OCCASIONALLY PRODUCE METAL DEBRIS.IN SOME CASES THE DEBRIS COULD FALL INTO THE AREA BETWEEN THE INTERLOCK LEVER AND THE BODY OF THE IGNITION SWITCH WHERE RELATIVE MOVEMENT OCCURS.DEBRIS TRAPPED IN THIS AREA CAN INCREASE FRICTION BETWEEN THE LEVER AND THE SWITCH BODY.IF THE DEBRIS IS OF SUFFICIENT SIZE, IT MAY SLOW THE RESPONSE OF THE LEVEL WHEN THE SOLENOID IS ENERGIZED.IN THIS SITUATION, IF THE TRANSMISSION IS NOT IN PARK AND THE IGNITION KEY IS ROTATED IN A CERTAIN MANNER THE INTERLOCK SYSTEM MAY FAIL TO PREVENT KEY REMOVAL, AS REQUIRED UNDER FMVSS 114.HONDA IMPLEMENTED MANUFACTURING CHANGES IN MARCH 2002 TO PREVENT DEBRIS FROM ENTERING THE IGNITION SWITCH ASSEMBLY.HONDA ALSO CHANGED END-OF-LINE INSPECTION PROCEDURES TO IMPROVE DETECTION OF DEBRIS.THE PRESENCE OF DEBRIS IN THE IGNITION SWITCH IS OTHERWISE UNAPPARENT TO THE OPERATOR OF THE VEHICLE.UNDER SAFETY RECALL 03V-422, HONDA WILL RECALL VEHICLES MANUFACTURED PRIOR TO MARCH 2002 TO TEST THE INTERLOCK SYSTEM FOR THE PRESENCE OF DEBRIS.VEHICLES THAT FAIL THE TEST WILL RECEIVE NEW IGNITION SWITCH ASSEMBLIES.
Additional source detail variants (3)
Electrical System:ignition:switch
ALL BUT ONE ODI COMPLAINT AND ALL ODI CRASHES ARE DUPLICATIVE OF HONDA REPORTS.ALL 7 CRASHES WERE ROLL-AWAY CRASHES THAT OCCURRED WHEN THE INTERLOCK SYSTEM MALFUNCTIONED AND THE VEHICLES WERE PARKED UNSECURED (NOT IN PARK, BRAKE NOT ENGAGED).THE 3 NOTED INJURIES WERE RELATIVELY MINOR.THE WARRANTY CLAIMS SHOWN UNDER OTHER WERE CONFIRMED BY HONDA AS INTERLOCK SYSTEM FAILURES.IN THE SUBJECT VEHICLE IGNITION-PARK INTERLOCK SYSTEM, AN ELECTRICALLY DRIVEN SOLENOID OPERATES A BLOCKING LEVER TO PREVENT IGNITION KEY REMOVAL WHEN THE SHIFT LEVER IS NOT IN THE PARK POSITION.ACCORDING TO HONDA, AN IGNITION SWITCH MANUFACTURING OPERATION COULD OCCASIONALLY PRODUCE METAL DEBRIS.IN SOME CASES THE DEBRIS COULD FALL INTO THE AREA BETWEEN THE INTERLOCK LEVER AND THE BODY OF THE IGNITION SWITCH WHERE RELATIVE MOVEMENT OCCURS.DEBRIS TRAPPED IN THIS AREA CAN INCREASE FRICTION BETWEEN THE LEVER AND THE SWITCH BODY.IF THE DEBRIS IS OF SUFFICIENT SIZE, IT MAY SLOW THE RESPONSE OF THE LEVEL WHEN THE SOLENOID IS ENERGIZED.IN THIS SITUATION, IF THE TRANSMISSION IS NOT IN PARK AND THE IGNITION KEY IS ROTATED IN A CERTAIN MANNER THE INTERLOCK SYSTEM MAY FAIL TO PREVENT KEY REMOVAL, AS REQUIRED UNDER FMVSS 114.HONDA IMPLEMENTED MANUFACTURING CHANGES IN MARCH 2002 TO PREVENT DEBRIS FROM ENTERING THE IGNITION SWITCH ASSEMBLY.HONDA ALSO CHANGED END-OF-LINE INSPECTION PROCEDURES TO IMPROVE DETECTION OF DEBRIS.THE PRESENCE OF DEBRIS IN THE IGNITION SWITCH IS OTHERWISE UNAPPARENT TO THE OPERATOR OF THE VEHICLE.UNDER SAFETY RECALL 03V-422, HONDA WILL RECALL VEHICLES MANUFACTURED PRIOR TO MARCH 2002 TO TEST THE INTERLOCK SYSTEM FOR THE PRESENCE OF DEBRIS.VEHICLES THAT FAIL THE TEST WILL RECEIVE NEW IGNITION SWITCH ASSEMBLIES.
Power Train:automatic Transmission:lever And Linkage:column Shift
ALL BUT ONE ODI COMPLAINT AND ALL ODI CRASHES ARE DUPLICATIVE OF HONDA REPORTS.ALL 7 CRASHES WERE ROLL-AWAY CRASHES THAT OCCURRED WHEN THE INTERLOCK SYSTEM MALFUNCTIONED AND THE VEHICLES WERE PARKED UNSECURED (NOT IN PARK, BRAKE NOT ENGAGED).THE 3 NOTED INJURIES WERE RELATIVELY MINOR.THE WARRANTY CLAIMS SHOWN UNDER OTHER WERE CONFIRMED BY HONDA AS INTERLOCK SYSTEM FAILURES.IN THE SUBJECT VEHICLE IGNITION-PARK INTERLOCK SYSTEM, AN ELECTRICALLY DRIVEN SOLENOID OPERATES A BLOCKING LEVER TO PREVENT IGNITION KEY REMOVAL WHEN THE SHIFT LEVER IS NOT IN THE PARK POSITION.ACCORDING TO HONDA, AN IGNITION SWITCH MANUFACTURING OPERATION COULD OCCASIONALLY PRODUCE METAL DEBRIS.IN SOME CASES THE DEBRIS COULD FALL INTO THE AREA BETWEEN THE INTERLOCK LEVER AND THE BODY OF THE IGNITION SWITCH WHERE RELATIVE MOVEMENT OCCURS.DEBRIS TRAPPED IN THIS AREA CAN INCREASE FRICTION BETWEEN THE LEVER AND THE SWITCH BODY.IF THE DEBRIS IS OF SUFFICIENT SIZE, IT MAY SLOW THE RESPONSE OF THE LEVEL WHEN THE SOLENOID IS ENERGIZED.IN THIS SITUATION, IF THE TRANSMISSION IS NOT IN PARK AND THE IGNITION KEY IS ROTATED IN A CERTAIN MANNER THE INTERLOCK SYSTEM MAY FAIL TO PREVENT KEY REMOVAL, AS REQUIRED UNDER FMVSS 114.HONDA IMPLEMENTED MANUFACTURING CHANGES IN MARCH 2002 TO PREVENT DEBRIS FROM ENTERING THE IGNITION SWITCH ASSEMBLY.HONDA ALSO CHANGED END-OF-LINE INSPECTION PROCEDURES TO IMPROVE DETECTION OF DEBRIS.THE PRESENCE OF DEBRIS IN THE IGNITION SWITCH IS OTHERWISE UNAPPARENT TO THE OPERATOR OF THE VEHICLE.UNDER SAFETY RECALL 03V-422, HONDA WILL RECALL VEHICLES MANUFACTURED PRIOR TO MARCH 2002 TO TEST THE INTERLOCK SYSTEM FOR THE PRESENCE OF DEBRIS.VEHICLES THAT FAIL THE TEST WILL RECEIVE NEW IGNITION SWITCH ASSEMBLIES.
Steering:column LOCKING:ANTI-THEFT Device
ALL BUT ONE ODI COMPLAINT AND ALL ODI CRASHES ARE DUPLICATIVE OF HONDA REPORTS.ALL 7 CRASHES WERE ROLL-AWAY CRASHES THAT OCCURRED WHEN THE INTERLOCK SYSTEM MALFUNCTIONED AND THE VEHICLES WERE PARKED UNSECURED (NOT IN PARK, BRAKE NOT ENGAGED).THE 3 NOTED INJURIES WERE RELATIVELY MINOR.THE WARRANTY CLAIMS SHOWN UNDER OTHER WERE CONFIRMED BY HONDA AS INTERLOCK SYSTEM FAILURES.IN THE SUBJECT VEHICLE IGNITION-PARK INTERLOCK SYSTEM, AN ELECTRICALLY DRIVEN SOLENOID OPERATES A BLOCKING LEVER TO PREVENT IGNITION KEY REMOVAL WHEN THE SHIFT LEVER IS NOT IN THE PARK POSITION.ACCORDING TO HONDA, AN IGNITION SWITCH MANUFACTURING OPERATION COULD OCCASIONALLY PRODUCE METAL DEBRIS.IN SOME CASES THE DEBRIS COULD FALL INTO THE AREA BETWEEN THE INTERLOCK LEVER AND THE BODY OF THE IGNITION SWITCH WHERE RELATIVE MOVEMENT OCCURS.DEBRIS TRAPPED IN THIS AREA CAN INCREASE FRICTION BETWEEN THE LEVER AND THE SWITCH BODY.IF THE DEBRIS IS OF SUFFICIENT SIZE, IT MAY SLOW THE RESPONSE OF THE LEVEL WHEN THE SOLENOID IS ENERGIZED.IN THIS SITUATION, IF THE TRANSMISSION IS NOT IN PARK AND THE IGNITION KEY IS ROTATED IN A CERTAIN MANNER THE INTERLOCK SYSTEM MAY FAIL TO PREVENT KEY REMOVAL, AS REQUIRED UNDER FMVSS 114.HONDA IMPLEMENTED MANUFACTURING CHANGES IN MARCH 2002 TO PREVENT DEBRIS FROM ENTERING THE IGNITION SWITCH ASSEMBLY.HONDA ALSO CHANGED END-OF-LINE INSPECTION PROCEDURES TO IMPROVE DETECTION OF DEBRIS.THE PRESENCE OF DEBRIS IN THE IGNITION SWITCH IS OTHERWISE UNAPPARENT TO THE OPERATOR OF THE VEHICLE.UNDER SAFETY RECALL 03V-422, HONDA WILL RECALL VEHICLES MANUFACTURED PRIOR TO MARCH 2002 TO TEST THE INTERLOCK SYSTEM FOR THE PRESENCE OF DEBRIS.VEHICLES THAT FAIL THE TEST WILL RECEIVE NEW IGNITION SWITCH ASSEMBLIES.
PE03013 · IGNITION-PARK Interlock System
Opened Apr 15, 2003 · Closed Sep 9, 2003
Status: closed (inferred from source dates) · Electrical System:ignition:switch; Power Train:automatic Transmission:gear Position Indication (prndl); Steering:column LOCKING:ANTI-THEFT Device
ALL ODI COMPLAINTS AND CRASHES ARE DUPLICATIVE OF HONDA COMPLAINTS.THE WARRANTY CLAIM COUNT SHOWN FOR OTHER REPRESENTS INCIDENTS WHERE HONDA'S ANALYSIS OF CLAIM DETAIL INDICATES THE INTERLOCK SYSTEM MALFUNCTIONED.THE CR-V INTERLOCK SYSTEM UTILIZES AN ECU TO CONTROL A SOLENOID DRIVEN BLOCKING DEVICE THAT PREVENTS KEY REMOVAL WHEN THE SHIFTER IS NOT IN PARK.HONDA DOCUMENTS IDENTIFIED A CONDITION WHERE METALLIC DEBRIS INTERFERES WITH THE OPERATION OF THE BLOCKING SOLENOID AND CAUSES THE INTERLOCK SYSTEM TO MALFUNCTION.HONDA DETERMINED THAT A MANUFACTURING PROCESS WAS THE SOURCE OF THE DEBRIS AND IMPLEMENTED A COUNTERMEASURE IN MARCH 2002.APPROXIMATELY 62,000 VEHICLES WERE PRODUCED PRIOR TO THIS DATE.ODI RECOGNIZES 63 INCIDENTS OF INTERLOCK FAILURE, WHICH INCLUDE 7 ROLLAWAY CRASHES, TWO OF WHICH RESULTED IN THREE INJURIES AND A MULTI VEHICLE ACCIDENT.ALL 63 FAILURES OCCURRED ON VEHICLES PRODUCED PRIOR TO THE MARCH COUNTERMEASURE.NOTING THE POPULATION OF POTENTIALLY AFFECTED VEHICLES, BOTH THE FAILURE AND CRASH RATES ARE OF SIGNIFICANT CONCERN TO ODI.
Additional source detail variants (3)
Electrical System:ignition:switch
ALL ODI COMPLAINTS AND CRASHES ARE DUPLICATIVE OF HONDA COMPLAINTS.THE WARRANTY CLAIM COUNT SHOWN FOR OTHER REPRESENTS INCIDENTS WHERE HONDA'S ANALYSIS OF CLAIM DETAIL INDICATES THE INTERLOCK SYSTEM MALFUNCTIONED.THE CR-V INTERLOCK SYSTEM UTILIZES AN ECU TO CONTROL A SOLENOID DRIVEN BLOCKING DEVICE THAT PREVENTS KEY REMOVAL WHEN THE SHIFTER IS NOT IN PARK.HONDA DOCUMENTS IDENTIFIED A CONDITION WHERE METALLIC DEBRIS INTERFERES WITH THE OPERATION OF THE BLOCKING SOLENOID AND CAUSES THE INTERLOCK SYSTEM TO MALFUNCTION.HONDA DETERMINED THAT A MANUFACTURING PROCESS WAS THE SOURCE OF THE DEBRIS AND IMPLEMENTED A COUNTERMEASURE IN MARCH 2002.APPROXIMATELY 62,000 VEHICLES WERE PRODUCED PRIOR TO THIS DATE.ODI RECOGNIZES 63 INCIDENTS OF INTERLOCK FAILURE, WHICH INCLUDE 7 ROLLAWAY CRASHES, TWO OF WHICH RESULTED IN THREE INJURIES AND A MULTI VEHICLE ACCIDENT.ALL 63 FAILURES OCCURRED ON VEHICLES PRODUCED PRIOR TO THE MARCH COUNTERMEASURE.NOTING THE POPULATION OF POTENTIALLY AFFECTED VEHICLES, BOTH THE FAILURE AND CRASH RATES ARE OF SIGNIFICANT CONCERN TO ODI.
Power Train:automatic Transmission:gear Position Indication (prndl)
ALL ODI COMPLAINTS AND CRASHES ARE DUPLICATIVE OF HONDA COMPLAINTS.THE WARRANTY CLAIM COUNT SHOWN FOR OTHER REPRESENTS INCIDENTS WHERE HONDA'S ANALYSIS OF CLAIM DETAIL INDICATES THE INTERLOCK SYSTEM MALFUNCTIONED.THE CR-V INTERLOCK SYSTEM UTILIZES AN ECU TO CONTROL A SOLENOID DRIVEN BLOCKING DEVICE THAT PREVENTS KEY REMOVAL WHEN THE SHIFTER IS NOT IN PARK.HONDA DOCUMENTS IDENTIFIED A CONDITION WHERE METALLIC DEBRIS INTERFERES WITH THE OPERATION OF THE BLOCKING SOLENOID AND CAUSES THE INTERLOCK SYSTEM TO MALFUNCTION.HONDA DETERMINED THAT A MANUFACTURING PROCESS WAS THE SOURCE OF THE DEBRIS AND IMPLEMENTED A COUNTERMEASURE IN MARCH 2002.APPROXIMATELY 62,000 VEHICLES WERE PRODUCED PRIOR TO THIS DATE.ODI RECOGNIZES 63 INCIDENTS OF INTERLOCK FAILURE, WHICH INCLUDE 7 ROLLAWAY CRASHES, TWO OF WHICH RESULTED IN THREE INJURIES AND A MULTI VEHICLE ACCIDENT.ALL 63 FAILURES OCCURRED ON VEHICLES PRODUCED PRIOR TO THE MARCH COUNTERMEASURE.NOTING THE POPULATION OF POTENTIALLY AFFECTED VEHICLES, BOTH THE FAILURE AND CRASH RATES ARE OF SIGNIFICANT CONCERN TO ODI.
Steering:column LOCKING:ANTI-THEFT Device
ALL ODI COMPLAINTS AND CRASHES ARE DUPLICATIVE OF HONDA COMPLAINTS.THE WARRANTY CLAIM COUNT SHOWN FOR OTHER REPRESENTS INCIDENTS WHERE HONDA'S ANALYSIS OF CLAIM DETAIL INDICATES THE INTERLOCK SYSTEM MALFUNCTIONED.THE CR-V INTERLOCK SYSTEM UTILIZES AN ECU TO CONTROL A SOLENOID DRIVEN BLOCKING DEVICE THAT PREVENTS KEY REMOVAL WHEN THE SHIFTER IS NOT IN PARK.HONDA DOCUMENTS IDENTIFIED A CONDITION WHERE METALLIC DEBRIS INTERFERES WITH THE OPERATION OF THE BLOCKING SOLENOID AND CAUSES THE INTERLOCK SYSTEM TO MALFUNCTION.HONDA DETERMINED THAT A MANUFACTURING PROCESS WAS THE SOURCE OF THE DEBRIS AND IMPLEMENTED A COUNTERMEASURE IN MARCH 2002.APPROXIMATELY 62,000 VEHICLES WERE PRODUCED PRIOR TO THIS DATE.ODI RECOGNIZES 63 INCIDENTS OF INTERLOCK FAILURE, WHICH INCLUDE 7 ROLLAWAY CRASHES, TWO OF WHICH RESULTED IN THREE INJURIES AND A MULTI VEHICLE ACCIDENT.ALL 63 FAILURES OCCURRED ON VEHICLES PRODUCED PRIOR TO THE MARCH COUNTERMEASURE.NOTING THE POPULATION OF POTENTIALLY AFFECTED VEHICLES, BOTH THE FAILURE AND CRASH RATES ARE OF SIGNIFICANT CONCERN TO ODI.