← New search

2011 GMC Sierra 2500

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2011 GMC Sierra 2500 do not stand out strongly from the model-year median of 46.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Sierra 2500 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

34 reports with mileage · 29 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 11 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 9 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

1 crash reports1 fire reports1 injury reports

Wheels complaints

3 reports
Clear category filter
56,800 miles · Aug 25, 2017
Wheels

THREE OE (3) GOODYEAR WRANGLER TIRES, LT265/60 R20 HAVE BECOME DEFECTIVE, ALL IN THE SAME FASHION WITH SIDEWALL PROBLEMS, TWO WITH BULGING, ONE WITH AN AT SPEED BLOWOUT AT THE SIDEWALL. FIRST ONE, 1/22/16 WHILE DRIVING BUT STOPPED DUE TO HEAVY TRAFFIC AND ANOTHER MOTORIST POINTED OUT THE BULGE. INSTALLED SPARE, AT DESTINATION …

Read full complaint

THREE OE (3) GOODYEAR WRANGLER TIRES, LT265/60 R20 HAVE BECOME DEFECTIVE, ALL IN THE SAME FASHION WITH SIDEWALL PROBLEMS, TWO WITH BULGING, ONE WITH AN AT SPEED BLOWOUT AT THE SIDEWALL. FIRST ONE, 1/22/16 WHILE DRIVING BUT STOPPED DUE TO HEAVY TRAFFIC AND ANOTHER MOTORIST POINTED OUT THE BULGE. INSTALLED SPARE, AT DESTINATION PURCHASED AT FULL PRICE 2 BRAND NEW TIRES IN ORDER TO HAVE MATCHING TREAD ON ALL TIRES. DEALER ALLEGED THERE MUST HAVE BEEN DAMAGE, SO THERE WAS NO WEAR ADJUSTMENT. SECOND ONE NOTED WHILE VEHICLE WAS PARKED IN MY DRIVEWAY 2/15/17. CALLED GOODYEAR WHO REFERRED ME TO A LOCAL FACTORY STORE WHO PRO-RATED AN ADJUSTMENT AND I REC'D A NEW TIRE. THIRD ONE BLEW OUT AT TURNPIKE SPEED 8/16/17. NONE OF THESE TIRES WERE ANYWHERE NEAR THE END OF TREAD LIFE AT THE TIME OF THE PROBLEM. THIS VEHICLE HAS NEVER BEEN "OFF-ROAD" AND I DO NOT DRIVE AROUND HITTING OBJECTS WITH THE TIRES. I DO NOT WANT TO TURN OVER THE LATEST DEFECTIVE TIRE TO A DEALER UNTIL I HEAR FROM YOU IF AN INVESTIGATION IS IN ORDER; IT IS "EVIDENCE". I DID TAKE PHOTOS OF THE FIRST TWO TIRES AND WILL DO THE SAME WITH THE MOST RECENT ONE. THANK YOU.

NHTSA ODI #11019584

32,000 miles · Nov 17, 2016
Wheels

ALL FOUR WHEELS HAVE DEVELOPED CRACKS OVER THE COURSE OF MY SIX YEAR OWNERSHIP OF THE VEHICLE. I HAVE SPOKEN WITH THE SERVICE DIRECTOR AT SIMPSON GMC OF BUENA PARK, CA, NUMEROUS TECHNICIANS AT SIMPSON GMC, SERVICE MANAGERS AT AMERICA'S TIRE OF VICTORVILLE, HESPERIA, AND FULLERTON, CA AND HAVE HIRED AN OUTSIDE ENGINEER THAT ALL A…

Read full complaint

ALL FOUR WHEELS HAVE DEVELOPED CRACKS OVER THE COURSE OF MY SIX YEAR OWNERSHIP OF THE VEHICLE. I HAVE SPOKEN WITH THE SERVICE DIRECTOR AT SIMPSON GMC OF BUENA PARK, CA, NUMEROUS TECHNICIANS AT SIMPSON GMC, SERVICE MANAGERS AT AMERICA'S TIRE OF VICTORVILLE, HESPERIA, AND FULLERTON, CA AND HAVE HIRED AN OUTSIDE ENGINEER THAT ALL AGREE THAT THERE IS A DEFECT IN DESIGN AND MANUFACTURING ON THE 20' DENALI HD WHEELS (RPO: PYS). I HAVE WELL DOCUMENTED INTERACTIONS WITH ALL PARTIES INVOLVED AND I INTEND TO PROVE THE DESIGN FLAW THAT EXISTS WITH THESE WHEELS. I AM ALSO IN CONTACT WITH THE MEDIA REGARDING THE LIFE THREATENING HAZARDOUS DESIGN THESE WHEELS POSE TO THE PUBLIC. GENERAL MOTORS HAS BEEN ADVISED NUMEROUS TIMES OF THE SAFETY HAZARD AND PROBLEMS WITH THESE WHEELS. PLEASE REFERENCE THE TWO LATEST EXECUTIVE OFFICE CASES 8-1552109660 AND 8-2402833027.

NHTSA ODI #10926574

60,000 miles · Sep 15, 2015
Wheels

I HAVE A 2011 GMC SIERRA 2500HD DENALI DIESEL 4X4 PICKUP TRUCK. AT 60,000 MILES ONE OF THE 20" ALUMINUM WHEELS FAILED WITH A LARGE CRACK ON THE BACKSIDE OF THE WHEEL. I PURCHASED A NEW WHEEL AND HAD AMERICA'S TIRE REMOUNT MY TIRE. AT 95,000 MILES THE SAME FAILURE HAPPENED, BUT ON A DIFFERENT WHEEL. THIS TIME THERE WERE TWO CRACK…

Read full complaint

I HAVE A 2011 GMC SIERRA 2500HD DENALI DIESEL 4X4 PICKUP TRUCK. AT 60,000 MILES ONE OF THE 20" ALUMINUM WHEELS FAILED WITH A LARGE CRACK ON THE BACKSIDE OF THE WHEEL. I PURCHASED A NEW WHEEL AND HAD AMERICA'S TIRE REMOUNT MY TIRE. AT 95,000 MILES THE SAME FAILURE HAPPENED, BUT ON A DIFFERENT WHEEL. THIS TIME THERE WERE TWO CRACKS IN THE WHEEL SEVERAL INCHES LONG. ON THIS FAILURE I NOTIFIED MY GMC DEALER, SIMPSON GMC IN BUENA PARK OF THE ISSUE. I REPLACED THIS WHEEL AGAIN WITH A NEW WHEEL. NOW AT 115,000 MILES I HAVE A THIRD 20" ALUMINUM WHEEL THAT HAS FAILED. THIS TIME THERE ARE FOUR CRACKS, 2 OF WHICH ARE OVER 1" LONG. I TOOK MY TRUCK INTO AMERICA'S TIRE AND MY GMC DEALER AND BOTH A TECHNICIAN AND THE SERVICE DIRECTOR AT SIMPSON GMC ARE SURPRISED THE WHEEL DIDN'T COME APART WHILE DRIVING. I HAVE ATTEMPTED TO WORK WITH MY GMC DEALER AS WELL AS GENERAL MOTORS CORPORATE TOWARDS A RESOLUTION OF THIS SAFETY ISSUE. I HAVE ASKED GM TO REPLACE AT LEAST THIS LATEST FAILED WHEEL AND INVESTIGATE THIS MATTER FURTHER. I CAN'T BE THE ONLY ONE WITH THIS ISSUE. GM HAS DENIED COVERING THE COST OF A NEW WHEEL AND HAS TWICE NOW IGNORED MY REQUESTS FOR AN INVESTIGATION. BECAUSE THIS IS A HUGE SAFETY ISSUE WHERE A FAILURE COULD ENDANGER MY LIFE, MY FAMILY'S LIFE, OR THE LIVES OF INNOCENT MOTORIST AROUND ME I MUST FILE A COMPLAINT AND ASK ONCE AGAIN THAT MY CONCERNS BE VALIDATED. I AM ASKING GM TO REPLACE ALL FOUR OF MY WHEELS WITH NEW WHEELS OF THE SAME KIND IF THEY CAN ASSURE ME THIS PROBLEM HAS BEEN FIXED, AND IF THAT IS NOT AN OPTION, I AM SEEKING GENERAL MOTORS COVER THE COSTS OF FOUR AFTERMARKET WHEELS. IF NO RESOLUTION COMES FROM THIS COMPLAINT I WILL FILE ADDITIONAL COMPLAINTS WITH GENERAL MOTORS, THE BUREAU OF AUTOMOTIVE REPAIR, THE BBB, THE ATTORNEY GENERAL, AND FINALLY WITH MY LEGAL COUNSEL.

NHTSA ODI #10764030

Official recalls

4

21V050000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2007-2011 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL, and 2009-2011 Chevrolet Silverado 2500, Silverado 3500, GMC Sierra 2500 and Sierra 3500 vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 22, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on March 1, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328760.

21V054000 · Air Bags:frontal:passenger Side:inflator Module

Feb 5, 2021

General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is recalling certain 2011-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, Yukon XL and 2011-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Additionally, GM is recalling certain 2010-2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL and 2010-2013 Cadillac Escalade EXT, Chevrolet Avalanche, Silverado 1500, and GMC Sierra 1500 vehicles originally sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Remedy: GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.

18V267000 · Equipment

Apr 26, 2018

General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence & remedy

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.

14V407000 · Electrical System

Jul 2, 2014

General Motors LLC (GM) is recalling certain model year 2007-2011 Chevrolet Silverado HD 2500/3500 trucks manufactured January 18, 2007, to June 22, 2011, and GMC Sierra HD 2500/3500 trucks manufactured January 22, 2007, to June 21, 2011, and equipped with an auxiliary battery. Owners may unknowingly draw too much current through the vehicle's trailer harness resulting in the melting of fusible link for the auxiliary battery.

Consequence & remedy

Consequence: If the fusible link melts it may come into contact with adjacent components, damage the electrical center cover, the nearby wiring harness conduit and other vehicle components, increasing the risk of a fire.

Remedy: GM will notify owners and dealers will replace the jumper harness with one that includes a 40 amp inline fuse, and provide the owner with supplemental Owner Manual information, free of charge. The recall began on August 29, 2014. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-800-462-8782. GM's number for this recall is 14260.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.