← New search

1998 GMC C/K Pickup

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all C/k Pickup years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 7 of 11 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Visibility. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes, Hydraulic. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Fuel System, Gasoline. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

2 crash reports0 fire reports0 injury reports

Structure complaints

1 reports
Clear category filter
80,000 miles · Dec 24, 2007
Service Brakes, HydraulicStructure

1998 GMC SIERRA. A CAR CUT IN FRONT OF MY TRUCK AND I HAD TO APPLY THE BRAKES VERY HARD. WHEN I DID THIS ,THE BRAKE LINE THAT RUNS ALONG THE FRAME RAIL FAILED AT THE BEND WHERE IT JOINS WITH THE REAR BRAKE HOSE. THE FAILURE APPEARED TO BE FROM RUST. *TR THIS,I FEEL ,WAS DUE TO POOR LOCATION. I HAVE A 1955 CHEVY PICKUP , …

Read full complaint

1998 GMC SIERRA. A CAR CUT IN FRONT OF MY TRUCK AND I HAD TO APPLY THE BRAKES VERY HARD. WHEN I DID THIS ,THE BRAKE LINE THAT RUNS ALONG THE FRAME RAIL FAILED AT THE BEND WHERE IT JOINS WITH THE REAR BRAKE HOSE. THE FAILURE APPEARED TO BE FROM RUST. *TR THIS,I FEEL ,WAS DUE TO POOR LOCATION. I HAVE A 1955 CHEVY PICKUP , THAT UNTIL 1 YEAR AGO STILL HAD ITS ORIGINAL LINES STILL WORKING.

NHTSA ODI #10212644

Official recalls

1

03V093000 · Visibility:rearview Mirrors/devices:exterior

Mar 7, 2003

CERTAIN SPORT UTILITY VEHICLES, MINI VANS, AND PICKUP TRUCKS MAY DEVELOP A SHORT CIRCUIT IN THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH.

Consequence & remedy

Consequence: IF THIS WERE TO HAPPEN, IT COULD RESULT IN AN INOPERATIVE SWITCH, HEAT DAMAGE TO THE DRIVER'S DOOR, AND/OR IGNITION OF COMPONENTS IN THE DRIVER'S DOOR AND A SUBSEQUENT VEHICLE FIRE WITHOUT PRIOR WARNING.

Remedy: DEALERS WILL INSTALL A FUSED JUMPER HARNESS TO THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH. OWNER NOTIFICATION BEGAN ON APRIL 24, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA02005 · Driver Door Electrical Fires

Opened May 17, 2002 · Closed May 1, 2003

Status: closed (inferred from source dates) · Electrical System; Visibility:rearview Mirrors/devices; Visibility:rearview Mirrors/devices:exterior

BY LETTER DATED MARCH 19, 2003, THE MANUFACTURER NOTIFIED NHTSA OF THE DECISION TO INITATE A SAFETY RECALL CAMPAIGN ON SELECTED VEHICLES WITHIN THE SUBJECT POPULATION.THE CAMPAIGN INVOLVES 507,000 C/K AND M/L VEHICLES BUILT DURING MODEL YEARS 1997-1998.THE RECALL INVOLVES VEHICLE MODELS WITH HIGH INCIDENT RATES AND BUILT AT SELECTED ASSEMBLY PLANTS.A CONTRIBUTING FACTOR TO THE DEFECT WASINHERENT VARIATIONS IN ASSEMBLY CONDITIONS, WORKER SKILL LEVELS ANDPROCESSES THAT EXIST FROM ONE ASSEMBLY LOCATION TO ANOTHER.TO REMEDY THE DEFECT, DEALERS WILL INSTALL A FUSED JUMPER HARNESS TO THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH.NHTSA HAS ASSIGNED CAMPAIGN NO. 03V-093 TO THE RECALL.

Additional source detail variants (3)

Electrical System

BY LETTER DATED MARCH 19, 2003, THE MANUFACTURER NOTIFIED NHTSA OF THE DECISION TO INITATE A SAFETY RECALL CAMPAIGN ON SELECTED VEHICLES WITHIN THE SUBJECT POPULATION.THE CAMPAIGN INVOLVES 507,000 C/K AND M/L VEHICLES BUILT DURING MODEL YEARS 1997-1998.THE RECALL INVOLVES VEHICLE MODELS WITH HIGH INCIDENT RATES AND BUILT AT SELECTED ASSEMBLY PLANTS.A CONTRIBUTING FACTOR TO THE DEFECT WASINHERENT VARIATIONS IN ASSEMBLY CONDITIONS, WORKER SKILL LEVELS ANDPROCESSES THAT EXIST FROM ONE ASSEMBLY LOCATION TO ANOTHER.TO REMEDY THE DEFECT, DEALERS WILL INSTALL A FUSED JUMPER HARNESS TO THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH.NHTSA HAS ASSIGNED CAMPAIGN NO. 03V-093 TO THE RECALL.

Visibility:rearview Mirrors/devices:exterior

BY LETTER DATED MARCH 19, 2003, THE MANUFACTURER NOTIFIED NHTSA OF THE DECISION TO INITATE A SAFETY RECALL CAMPAIGN ON SELECTED VEHICLES WITHIN THE SUBJECT POPULATION.THE CAMPAIGN INVOLVES 507,000 C/K AND M/L VEHICLES BUILT DURING MODEL YEARS 1997-1998.THE RECALL INVOLVES VEHICLE MODELS WITH HIGH INCIDENT RATES AND BUILT AT SELECTED ASSEMBLY PLANTS.A CONTRIBUTING FACTOR TO THE DEFECT WASINHERENT VARIATIONS IN ASSEMBLY CONDITIONS, WORKER SKILL LEVELS ANDPROCESSES THAT EXIST FROM ONE ASSEMBLY LOCATION TO ANOTHER.TO REMEDY THE DEFECT, DEALERS WILL INSTALL A FUSED JUMPER HARNESS TO THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH.NHTSA HAS ASSIGNED CAMPAIGN NO. 03V-093 TO THE RECALL.

Visibility:rearview Mirrors/devices

BY LETTER DATED MARCH 19, 2003, THE MANUFACTURER NOTIFIED NHTSA OF THE DECISION TO INITATE A SAFETY RECALL CAMPAIGN ON SELECTED VEHICLES WITHIN THE SUBJECT POPULATION.THE CAMPAIGN INVOLVES 507,000 C/K AND M/L VEHICLES BUILT DURING MODEL YEARS 1997-1998.THE RECALL INVOLVES VEHICLE MODELS WITH HIGH INCIDENT RATES AND BUILT AT SELECTED ASSEMBLY PLANTS.A CONTRIBUTING FACTOR TO THE DEFECT WASINHERENT VARIATIONS IN ASSEMBLY CONDITIONS, WORKER SKILL LEVELS ANDPROCESSES THAT EXIST FROM ONE ASSEMBLY LOCATION TO ANOTHER.TO REMEDY THE DEFECT, DEALERS WILL INSTALL A FUSED JUMPER HARNESS TO THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH.NHTSA HAS ASSIGNED CAMPAIGN NO. 03V-093 TO THE RECALL.