NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
13Apr 14, 2020
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: The vehicle's rearward visibility may be reduced, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
Jul 31, 2018
Daimler Trucks North America, LLC (DTNA) is recalling certain 2012-2015 Freightliner Cascadia, Coronado, Business Class M2, 114SD, and Western Star 4900 trucks. In certain front axle, brake lining, and brake spider combinations, braking may cause high vibrations, resulting in early failure of the tie-rod tube.
Consequence & remedy
Consequence: A tie-rod failure would cause a disconnect between the front wheels, resulting in a loss of steering ability, thereby increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the brake linings, brake spider, and tie-rod, free of charge. The recall began March 22, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL782.
Dec 15, 2017
Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.
Oct 1, 2015
Daimler Trucks North America LLC (DTNA) is recalling certain model year 2011-2014 Cascadia, Business Class M2, Coronado, and Columbia Glider vehicles manufactured April 5, 2010, to June 15, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.
Consequence & remedy
Consequence: If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.
Remedy: DTNA will notify owners, and DTNA authorized service facilities will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 20, 2015. Owners may contact DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL-692.
Apr 9, 2013
Daimler Trucks North America (DTNA) is recalling certain model year 2012-2014 Cascadia and Coronado vehicles manufactured between November 21, 2011, and April 3, 2013. In the affected vehicles, when the ignition is off and the door is opened without the parking brake applied, the dashboard does not display the correct message of "Park Brake Off Door Open."
Consequence & remedy
Consequence: Without the proper warning, a driver may not be reminded to apply the parking brake which may lead to a vehicle roll away, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will update then display software. The safety recall began on June 6, 2013. Owners may contact DTNA at 1-800-547-0712. Daimler's recall campaign number is FL-642.
Dec 21, 2012
Daimler Trucks North America (DTNA) is recalling certain model year 2012 Cascadia and Coronado tractor trailers manufactured from August 1, 2011, through December 30, 2011, equipped with Thermo King TriPac Auxiliary Power Units (APU), serial numbers 3000106335 to 3000127584, manufactured from July 29, 2011, through November 7, 2011. The maintenance access panel door on the bottom of the APU may dislodge and separate.
Consequence & remedy
Consequence: If the door separates from the APU while the vehicle is being driven, it may create a road hazard for other drivers.
Remedy: DTNA will notify owners, and Thermo King dealers will inspect the APUs and replace any of the affected panel doors free of charge. The recall began February 25, 2013. Owners may contact DTNA at 1-800-547-0712.
Aug 16, 2012
Daimler Trucks North America (DTNA) is recalling certain model year 2009-2012 Freightliner, Sterling, and Western Star vehicles manufactured from July 7, 2008, through December 15, 2011, and equipped with perpendicular air tank mounting brackets. The air tank mounting brackets may develop cracks which can lead to the air tank brackets separating from the frame rail. The air tanks may also separate from the vehicle.
Consequence & remedy
Consequence: Air tanks that become separated from a moving vehicle may create a road debris hazard, increasing the risk of a crash.
Remedy: DTNA will notify owners, and dealers will replace the air mounting brackets, free of charge. The recall began on December 24, 2012. Owners may contact Daimler Trucks North America toll free at 1-800-547-0712.
Apr 24, 2012
DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2012-2013 FREIGHTLINER 108SD, BUSINESS CLASS M2, CASCADIA, CORONADO VEHICLES, EQUIPPED WITH A HALDEX QUICK RELEASE VALVE, AND MANUFACTURED FROM FEBRUARY 3, 2012, THROUGH MARCH 2, 2012. THE QUICK RELEASE VALVE COVER MAY NOT BE CORRECTLY MANUFACTURED, ALLOWING THE COVER TO BECOME SEPARATED FROM THE VALVE BODY. IF THE COVER SEPARATES FROM THE VALVE BODY, THE FRONT BRAKES MAY NOT FUNCTION.
Consequence & remedy
Consequence: IF THIS CONDITION OCCURS, INCREASED VEHICLE STOPPING DISTANCE MAY RESULT, INCREASING THE RISK OF A CRASH.
Remedy: DTNA WILL NOTIFY OWNERS, AND WHERE NECESSARY, THE QUICK RELEASE VALVE WILL BE REPLACED BY DTNA AUTHORIZED SERVICE FACILITIES, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN BEFORE JUNE 15, 2012. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
Feb 28, 2012
DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2006-2013 FREIGHTLINER, STERLING, AND WESTERN STAR VEHICLES, EQUIPPED WITH DETROIT DIESEL EPA07 AND EPA10, DD13 AND DD15/16 ENGINES, MANUFACTURED FROM JANUARY 20, 2006, THROUGH FEBRUARY 20, 2012. THE PUMP TO RAIL HIGH PRESSURE FUEL LINE SUPPORT SYSTEM USED ON THESE ENGINES IS SENSITIVE TO ASSEMBLY TORQUE AND MAY BE DAMAGED DURING SERVICE WORK. AS A RESULT OF OTHER REPAIRS, THE LINE SUPPORTS MAY LOOSEN, POTENTIALLY LEADING TO FUEL LINE CRACKING AND A FUEL LEAK.
Consequence & remedy
Consequence: A FUEL LEAK COULD CREATE A ROAD HAZARD, INCREASING THE RISK OF A CRASH. ALSO A FUEL LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.
Remedy: DTNA WILL NOTIFY OWNERS, AND WHERE NECESSARY, THE HIGH PRESSURE FUEL LINE SUPPORT SYSTEM WILL BE REPLACED BY DTNA AUTHORIZED SERVICE FACILITIES, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 27, 2012. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
Sep 15, 2011
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011- 2012 BUSINESS CLASS M2 AND CORONADO TRUCKS MANUFACTURED FROM SEPTEMBER 1, 2010, THROUGH DECEMBER 31, 2010, EQUIPPED WITH A CUMMINS ISX OR ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.
Consequence & remedy
Consequence: IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.
Remedy: DAIMLER TRUCKS IS WORKING WITH CUMMINS TO IDENTIFY AND NOTIFY OWNERS OF THE RECALL CAMPAIGN. REPAIRS WILL BE PERFORMED BY AUTHORIZED CUMMINS DEALERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 10, 2011. OWNERS MAY CONTACT CUMMINS AT 1-812-377-5000 OR DAIMLER TRUCKS AT 1-800-547-0712.
Sep 8, 2011
DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2006-2012 FREIGHTLINER BUSINESS CLASS M2, CASCADIA, CENTURY, COLUMBIA, CORONADO AND STERLING A-LINE VEHICLES BUILT WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) SYSTEM MANUFACTURED FROM SEPTEMBER 15, 2005 THROUGH SEPTEMBER 1, 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.
Consequence & remedy
Consequence: IF THE DRIVER IS SLOW TO REACT DURING THIS ESC INTERVENTION, THE VEHICLE MAY DEVIATE FROM THE INTENDED LINE OF TRAVEL INCREASING THE RISK OF A CRASH.
Remedy: DAIMLER TRUCKS WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE ESC MODULE WITH THE APPROPRIATE SOFTWARE VERSION AS NECESSARY, FREE OF CHARGE. AN INTERIM OWNER NOTIFICATION WILL BE MAILED ON OR ABOUT NOVEMBER 21, 2011. THE DATE FOR AVAILABILITY OF THE FINAL REMEDY IS SUBJECT TO VALIDATION TESTING AND PARTS AVAILABILITY. THE SAFETY RECALL BEGAN ON MARCH 28, 2012. OWNERS MAY CONTACT DAIMLER TRUCKS TOLL-FREE AT 1-800-547-0712.
Aug 9, 2011
DTNA IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 CORONADO VEHICLES EQUIPPED WITH A SET FORWARD FRONT AXLE AND A LOGGER BUMPER WITH A CENTER TOW DEVICE MANUFACTURED FROM MARCH 9, 2010, THROUGH JULY 16, 2011. CERTAIN BUMPER MOUNTING BRACKETS MAY CRACK.
Consequence & remedy
Consequence: IF NOT REPAIRED, THE CRACK MAY LEAD TO THE BUMPER FALLING OFF OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
Remedy: DTNA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE BUMPER MOUNTING BRACKETS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING NOVEMBER 2011. OWNERS MAY CONTACT DAIMLER TRUCKS AT 1-800-547-0712.
Jun 21, 2011
DTNA IS RECALLING CERTAIN MODEL YEAR 2008-2012 FREIGHTLINER; CASCADIA, CENTURY CLASS, COLUMBIA, AND CORONADO, CERTAIN MODEL YEAR 2008-2009 STERLING; A-LINE AND L-LINE AND CERTAIN MODEL YEAR 2009-2012 WESTERN STAR CONSTELLATION VEHICLES, MANUFACTURED FROM JANUARY 14, 2008, THROUGH JUNE 15, 2011, BUILT WITH DETROIT DIESEL 15 OR 16 ENGINES. THE BOLT ATTACHING A RUBBER ISOLATOR TO A SUPPORT BRACKET MAY BECOME LOOSE AND BACK OUT, POTENTIALLY CONTACTING AN UN-FUSED STARTER CABLE AND CREATING A SHORT CIRCUIT.
Consequence & remedy
Consequence: A SHORT CIRCUIT BETWEEN AN UN-FUSED BATTERY CABLE AND CHASSIS GROUND COULD RESULT IN A VEHICLE FIRE.
Remedy: DEALERS WILL INSTALL A NEW BOLT AND ISOLATOR AND REPAIR THE RECREATIONAL VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 21, 2011. OWNERS MAY CONTACT DTNA AT 1-800-547-0712.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2AQ18002 · Daimler Trucks North America Recalls
Opened Apr 23, 2018 · Closed Jul 11, 2024
Status: closed (inferred from source dates) · Exterior Lighting:brake Lights:switch; Steering:hydraulic Power Assist:hose, Piping, And Connections
On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.
Additional source detail variants (2)
Exterior Lighting:brake Lights:switch
On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.
Steering:hydraulic Power Assist:hose, Piping, And Connections
On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.
PE12018 · Air Brake Reservoir Bracket Fracture
Opened Jun 25, 2012 · Closed Sep 20, 2012
Status: closed (inferred from source dates) · Service Brakes, Air:supply:reservoir/tank
The Office of Defects Investigation (ODI) received Early Warning Reporting (EWR) data from the manufacturer that indicated some number of subject vehicles had allegedly experienced a fracture of one or more support brackets resulting in an unsecured air brake reservoir.This could result in a loss of air pressure necessary for proper service brake application and a potential road hazard if the reservoir separates from the vehicle in operation.By letter dated August 15, 2012, Daimler Trucks North America LLC (DTNA) has notified ODI that it has initiated a safety recall (identified by NTHSA Recall No. 12V-405 and DTNA Recall No. FL-631) to address a safety defect in approximately 1,663 model year (MY) 2009 through 2012 Freightliner 114SD, Business Class M2, Cascadia, Coronado, Sterling 9500 and Western Star 4700 trucks manufactured from July 7, 2008 through December 15, 2011, originally equipped with a specific perpendicular oriented air brake reservoir support bracket (P/N 12-22981-000).To date ODI is unaware of any bracket failures that resulted in a complete separation of the reservoir from the vehicle.Affected owners will be notified by DTNA beginning October 15, 2012 and affected vehicles will have the subject air brake reservoir support brackets replaced with a more robust bracket.Repairs will be performed by DTNA authorized service facilities.Copies of DTNA's reimbursement plan for pre-notification remedies will be submitted to ODI as a supplemental report when available.Accordingly, this investigation is closed.
Illustration