← New search

1994 Fleetwood Bounder

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Bounder years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 4 of 20 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Service Brakes, Hydraulic. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Suspension. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports1 fire reports0 injury reports

Structure complaints

4 reports
Clear category filter
30,000 miles · Nov 12, 2003
Structure

WHILE ADDRESSING AN ONGOING PROBLEM WITH THE BATTERIES A FEW WEEKS AGO, WE WERE INFORMED BY OUR DEALER THAT SERIOUS CRACKS HAD BEEN FOUND IN THE VERTICAL WELDS OF THE SUPPORT BEAMS WHICH HOLD THE FRONT BUMPER AND BATTERY ASSEMBLY TO THE "A" FRAME. THESE CRACKS AS SHOWN TO US IN PHOTOS, RUN HALF WAY DOWN THE VERTICAL WELDS CRUCI…

Read full complaint

WHILE ADDRESSING AN ONGOING PROBLEM WITH THE BATTERIES A FEW WEEKS AGO, WE WERE INFORMED BY OUR DEALER THAT SERIOUS CRACKS HAD BEEN FOUND IN THE VERTICAL WELDS OF THE SUPPORT BEAMS WHICH HOLD THE FRONT BUMPER AND BATTERY ASSEMBLY TO THE "A" FRAME. THESE CRACKS AS SHOWN TO US IN PHOTOS, RUN HALF WAY DOWN THE VERTICAL WELDS CRUCIAL IN SUPPORTING THE BUMPER ASSEMBLY. WE HAVE NOT BEEN IN ANY ACCIDENT NOR HAVE WE MODIFIED THE BUMPER WITH ATTACHMENTS. THE ORIGINAL SERVICE TECHNICIAN INFORMED US THAT OVER THE YEARS HE HAS SEEN THIS TYPE OF SEPARATION ON BOUNDER/FLEETWOOD MODELS. *LA

NHTSA ODI #10046812

Mileage unknown · Sep 12, 2000
Structure

THE CHASSIS/COACH HAS STRUCTURAL PROBLEMS, THE DESIGN IS NOT LEVEL AND IS NOT STRUCTURALLY SUPPORTIVE, THE WELD BROKE ON THE 5 INCH RECTANGLE TUBE ALSO CAUSING THE TUBE TO CRACK HALFWAY AROUND, ON THE 5 INCH RECTANGLE TUBE ON END OF THE WELD BROKE COMPLETELY AWAY AND THE OTHER WELD IS HALFWAY BROKEN. *SLC

NHTSA ODI #554564

Mileage unknown · May 3, 2000
Structure

THE UNLOADED VEHICLE WEIGHT,(UVW), IS APPROXIMATELY 16,960POUNDS RATHER THAN THE 16,186 POUNDS STATED BY THE MANUFACTURER ON THE "CARRYING CAPACITY" DISCLOSURE TAG. THE OVERWEIGHT CONDITION PRECLUDES THE SAFE OPERATION OF THE VEHICLE FOR ITS REASONABLY FORESEEABLE AND INTENDED USES. I BELIEVE THERE MAY BE AS MANY AS THIRTYONE …

Read full complaint

THE UNLOADED VEHICLE WEIGHT,(UVW), IS APPROXIMATELY 16,960POUNDS RATHER THAN THE 16,186 POUNDS STATED BY THE MANUFACTURER ON THE "CARRYING CAPACITY" DISCLOSURE TAG. THE OVERWEIGHT CONDITION PRECLUDES THE SAFE OPERATION OF THE VEHICLE FOR ITS REASONABLY FORESEEABLE AND INTENDED USES. I BELIEVE THERE MAY BE AS MANY AS THIRTYONE OTHER BOUNDER MOTORHOMES THAT ARE LIKEWISE SAFETY COMPROMISED. THOSE OWNERS MAY UNWITTINGLY OVERLOAD THEIR VEHICLES BY MENTALLY ADDING UP ALL WEIGHTS TO THE STATED CARRYING CAPACITY OF 2154 POUNDS WHEN PACKING FOR A TRIP. THE ACTUAL CARRYING CAPACITY OF MY MOTORHOME IS ONLY 1380POUNDS, 36% SHORT OF WHAT I PURCHASED. *AK

NHTSA ODI #722246

Mileage unknown · Jan 25, 1999
Structure

WELDS HOLDING COACH TO FRAME BROKE DUE TO WELDING FAILURE.

NHTSA ODI #543500

Official recalls

1

94V105000 · Fuel System, Other:delivery:hoses, Lines/piping, And Fittings

Jun 9, 1994

THE LIQUID PROPANE GAS (LPG) PIPES AT THE REAR OF THE VEHICLE ARE ROUTED SO THEY CONTACT THE TAG AXLE DURING VERTICAL MOVEMENT. THIS CONTACT CAN RUPTURE THE LPG PIPE AND ALLOW LPG LEAKAGE.

Consequence & remedy

Consequence: CONSEQUENCE OF NON-COMPLIANCE: WHEN A MIXTURE OF LPG GAS AND OXYGEN IS EXPOSED TO A SOURCE OF IGNITION, AN EXPLOSION CAN RESULT AND IGNITE SURROUNDING COMBUSTIBLE MATERIALS.

Remedy: DEALERS WILL INSTALL A SECTION OF COPPER TUBING IN THE REAR OF THE VEHICLE TO REPLACE IRON PIPING IN AN AREA OUT OF THE SCOPE OF THE AXLE SWING AREA.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

0

No exact-year investigations in this snapshot.