IllustrationTHE GAS TANK ON THIS MOTORCYCLE IS PLASTIC AND HAS SWOLLEN TO THE POINT THAT IT WILL NOT SECURELY LATCH TO THE FRAME. IT HAS SWOLLEN AGAINST THE LATCH THAT CONNECTS IT AND INTO THE IGNITION SYSTEM. IF YOU RIDE THIS BIKE, YOU ARE RIDING IT WITHOUT THE TANK CONNECTED TO THE BIKE. *TR
2007 Ducati Monster 696
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Monster 696 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 10 of 11 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Fuel System, Gasoline. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Fuel/propulsion System. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
11 reportsI HAVE A WARPED/EXPANDING GAS TANK ON A 2007 DUCATI MONSTER 695 MOTORCYCLE. *TR
ETHANOL REACTS WITH THE PLASTIC TANK CAUSING IT TO EXPAND RESULTING IN POSSIBLE GAS LEAKING. WARPING OF THE TANK AND EXPANSION SIGNS ARE VISIBLE. NOTHING HAS BEEN DONE YET TO CORRECT THIS ISSUE. *TR
2007 DUCATI MONSTER 695 FUEL TANK IS EXPANDING AND WARPING. TANK IS A PLASTIC CONSTRUCTION AND SHOWS SIGNS OF CHANGES IN SIZE. *TR
THE PLASTIC GAS TANK ON MY 2007 DUCATI MONSTER 695 IS EXPANDING, THE RUBBER MOUNTS THAT HOLD IT TO THE FRAME HAVE NOW COMPLETELY OVERLAPPED THE FRAME ON ONE SIDE, AND IT IS EXPANDING OVER THE IGNITION SWITCH AND PUTTING CONSIDERABLE PRESSURE ON IT. I DON'T KNOW HOW MUCH MORE IT WILL EXPAND BEFORE IT CRACKS SOMEWHERE. THE VEHICLE…
Read full complaint
THE PLASTIC GAS TANK ON MY 2007 DUCATI MONSTER 695 IS EXPANDING, THE RUBBER MOUNTS THAT HOLD IT TO THE FRAME HAVE NOW COMPLETELY OVERLAPPED THE FRAME ON ONE SIDE, AND IT IS EXPANDING OVER THE IGNITION SWITCH AND PUTTING CONSIDERABLE PRESSURE ON IT. I DON'T KNOW HOW MUCH MORE IT WILL EXPAND BEFORE IT CRACKS SOMEWHERE. THE VEHICLE HAS NOT BEEN MODIFIED, IT IS COMPLETELY STOCK FROM THE FACTORY. *TR
THE NYLON FUEL TANK ON MY DUCATI MONSTER IS EXPANDING DUE TO USE OF ETHANOL FUEL BLENDS AT MOST MAJOR GAS STATIONS. IT IS BEGINNING TO LEAK AROUND THE TOP AND SWELL ON THE SIDES. *TR
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGN…
Read full complaint
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. I HAVE NOT SIGNIFICANTLY MODIFIED MY MOTORCYCLE EXCEPT FOR AN AFTERMARKET EXHAUST AND SOME COSMETIC CHANGES. I HAVE MADE NO MODIFICATIONS TO THE FUEL TANK OR FUEL PUMP. I AM CONCERNED AS TO THE SAFETY OF THIS MOTORCYCLE NOW. THE TANK'S SWELLING HAS MADE IT SO THE HANDLEBARS DO NOT TURN CORRECTLY. IF THE TANK SWELLS ENOUGH, IT WILL SPLIT OPEN AND I AM CONCERNED THIS WILL HAPPEN WHILE I AM RIDING. *TR
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGN…
Read full complaint
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. I HAVE NOT SIGNIFICANTLY MODIFIED MY MOTORCYCLE EXCEPT FOR AN AFTERMARKET EXHAUST AND SOME COSMETIC CHANGES. I HAVE MADE NO MODIFICATIONS TO THE FUEL TANK OR FUEL PUMP. I TOOK THE BIKE TO THE DEALER WHO SUBMITTED A CLAIM TO DUCATI NORTH AMERICA (THE IMPORTER/FACTORY). I AM VERY CONCERNED AS TO THE SAFETY OF THIS MOTORCYCLE NOW. THE TANK'S SWELLING HAS MADE IT SO THE HANDLEBARS DO NOT TURN CORRECTLY. IF THE TANK SWELLS ENOUGH, IT WILL SPLIT OPEN AND I AM CONCERNED THIS WILL HAPPEN WHILE I AM RIDING. *TR
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNIT…
Read full complaint
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. I HAVE NOT SIGNIFICANTLY MODIFIED MY MOTORCYCLE EXCEPT FOR AN AFTERMARKET EXHAUST AND SOME COSMETIC CHANGES. I HAVE MADE NO MODIFICATIONS TO THE FUEL TANK OR FUEL PUMP. I AM VERY CONCERNED AS TO THE SAFETY OF THIS MOTORCYCLE NOW. THE TANK'S SWELLING HAS MADE IT SO THE HANDLEBARS DO NOT TURN CORRECTLY. IF THE TANK SWELLS ENOUGH, IT WILL SPLIT OPEN AND I AM CONCERNED THIS WILL HAPPEN WHILE I AM RIDING. I HAVE HAD THE TANK INSPECTED BY A DUCATI DEALERSHIP WHO HAS CONTACTED DUCATI NA AND HAVE NOT YET RECEIVED A RESPONSE. *TR
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IG…
Read full complaint
MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. I HAVE NOT SIGNIFICANTLY MODIFIED MY MOTORCYCLE EXCEPT FOR AN AFTERMARKET EXHAUST AND SOME COSMETIC CHANGES. I HAVE MADE NO MODIFICATIONS TO THE FUEL TANK OR FUEL PUMP. I TOOK THE BIKE TO THE DEALER WHO SUBMITTED A CLAIM TO DUCATI NORTH AMERICA (THE IMPORTER/FACTORY) AND THEY REFUSED TO REPLACE THE TANK. I WAS NOT GIVEN A REASON. I AM VERY CONCERNED AS TO THE SAFETY OF THIS MOTORCYCLE NOW. THE TANK'S SWELLING HAS MADE IT SO THE HANDLEBARS DO NOT TURN CORRECTLY. THIS IS NOT IF THE TANK SWELLS ENOUGH, IT WILL SPLIT OPEN AND I AM CONCERNED THIS WILL HAPPEN WHILE I AM RIDING. A GAS TANK SHOULD NOT CHANGE SHAPE UNDER NORMAL USE AND I HAVE NOT MODIFIED THE BIKE IN A MANNER WHICH WOULD CAUSE EXPANSION. *TR
Official recalls
0No recalls in this snapshot.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10045 · Fuel Leak At Pump/tank Interface
Opened Nov 4, 2010 · Closed Feb 28, 2011
Status: closed (inferred from source dates) · Fuel System, Gasoline:storage:tank Assembly
After opening this PE, we met with subject owners, dealers, and Ducati North America personnel.We learned that the subject leakage is limited to the Multistrada line alone and is unrelated to composite fuel tank deformation.Rather it stems from the inability of the original sealing O-ring to conform to the tank's relatively rough sealing surface.Recall 11V-020 provides a new X section O-ring to address the Multistrada issue and with that recall, this PE is closed for the Multistrada.Meanwhile, unlike the Multistrada, the Monster line fails to exhibit a current safety defect trend and, on that basis, this PE is closed for those models as well.