Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
820–25K
9925–50K
14450–75K
14575–100K
192100–150K
85150K+
747 reports with mileage · 137 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
Suspension. Review the 255 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Electrical System. Review the 197 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Structure. Review the 158 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
54 crash reports18 fire reports28 injury reports
What owners actually said
884 reports
180,000 miles · Jun 29, 2020
Power Train
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE PARKING, THE VEHICLE CEASED AND FAILED TO SHIFT INTO GEAR. THERE WERE NO WARNING LIGHTS ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO BE DIAGNOSED NOR REPAIRED. THE LOCAL DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS CONTACTED AND REFERRED THE CONTACT TO NHTSA…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE PARKING, THE VEHICLE CEASED AND FAILED TO SHIFT INTO GEAR. THERE WERE NO WARNING LIGHTS ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO BE DIAGNOSED NOR REPAIRED. THE LOCAL DEALER WAS NOT CONTACTED. THE MANUFACTURER WAS CONTACTED AND REFERRED THE CONTACT TO NHTSA. THE FAILURE MILEAGE WAS 180,000.
NHTSA ODI #11331408
50,000 miles · Jun 26, 2020
Structure
THE VEHICLES SUBFRAME WAS ALL ROTTED AND DRIVERS SIDE TIRE PRACTICALLY FELL OFF WHILE IT WAS BEING DRIVEN. CONTACTED DODGE AND THEY SAID BECAUSE THERE WASN'T AN OPEN RECALL THERE WAS NOTHING THEY COULD DO ABOUT IT. MY QUESTION IS WAS THERE A RECALL ON MY PARTICULAR VEHICLE IF SO WHEN/WHERE WAS IT FIXED. WE BOUGHT THIS USED AN…
Read full complaint
THE VEHICLES SUBFRAME WAS ALL ROTTED AND DRIVERS SIDE TIRE PRACTICALLY FELL OFF WHILE IT WAS BEING DRIVEN. CONTACTED DODGE AND THEY SAID BECAUSE THERE WASN'T AN OPEN RECALL THERE WAS NOTHING THEY COULD DO ABOUT IT. MY QUESTION IS WAS THERE A RECALL ON MY PARTICULAR VEHICLE IF SO WHEN/WHERE WAS IT FIXED. WE BOUGHT THIS USED AND HAVE NO PRIOR INFORMATION ON IT. IF THIS VEHICLE WASN'T INCLUDED ON PREVIOUS RECALLS IT SHOULD HAVE BEEN AND THEY SHOULD FIX IT NOW. *TR
NHTSA ODI #11331100
76,000 miles · Jun 24, 2020
Power Train
WHEN EVER WE ARE GOING DOWN THE HIGHWAY ARE 65 MPH THE TRANSMISSION TEMP LIGHT COMES ON AND THE CAR GOES LIMP AND WONT RUN NORMAL TILL IT COOLS DOWN. *TR
NHTSA ODI #11330546
150,000 miles · May 18, 2020
StructureSuspension
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT APPROXIMATELY 55 MPH, THERE WAS AN ABNORMAL TICKING NOISE. IN ADDITION, WHILE EXITING THE HIGHWAY THE FRONT AXLE FRACTURED. THE VEHICLE WAS TOWED TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE FRAME AND FRONT OF THE VEHICLE WAS RUSTED…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT APPROXIMATELY 55 MPH, THERE WAS AN ABNORMAL TICKING NOISE. IN ADDITION, WHILE EXITING THE HIGHWAY THE FRONT AXLE FRACTURED. THE VEHICLE WAS TOWED TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE FRAME AND FRONT OF THE VEHICLE WAS RUSTED. THE VEHICLE WAS TOWED TO MIDWAY DODGE (4747 S PULASKI RD, CHICAGO, IL 60632, (773) 376-8060) WHERE THE DIAGNOSIS WAS CONFIRMED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 150,000.
NHTSA ODI #11324933
75,000 miles · May 5, 2020
Power Train
TRANSMISSION TEMP LIGHT COMES ON DUE TO FAULTY SENSOR CAUSING CAR TO GO IN LIMP MODE. *TR
NHTSA ODI #11323421
155,000 miles · Apr 26, 2020
Electrical SystemElectronic Stability Control (esc)Vehicle Speed Control
STARTED VEHICLE WHICH HAD BEEN RUNNING PERFECTLY FINE, JUST GOT A OIL CHANGE A FEW DAYS PRIOR. STARTED DRIVING AND THE CAR STARTS SPUTTERING LIKE IT WAS GOING TO DIE. THE ETC SYMBOL STARTED TO FLASH AND CAR WOULD ONLY GO 5-10 MPH WHEN THIS HAPPENED I WAS ALREADY DRIVING AT 40MPH WHEN THE CAR JUST STARTED TO SLOW DOWN TO THE 5 MI…
Read full complaint
STARTED VEHICLE WHICH HAD BEEN RUNNING PERFECTLY FINE, JUST GOT A OIL CHANGE A FEW DAYS PRIOR. STARTED DRIVING AND THE CAR STARTS SPUTTERING LIKE IT WAS GOING TO DIE. THE ETC SYMBOL STARTED TO FLASH AND CAR WOULD ONLY GO 5-10 MPH WHEN THIS HAPPENED I WAS ALREADY DRIVING AT 40MPH WHEN THE CAR JUST STARTED TO SLOW DOWN TO THE 5 MILES AND SPUTTER.
NHTSA ODI #11322277
85,000 miles · Apr 13, 2020
Fuel/propulsion System
UPON COMPLETELY FILLING THE FUEL TANK, THE ENGINE REPEATEDLY STALLS AFTER I'VE DRIVEN IT FOR A FEW MINUTES. IT DOESN'T MATTER IF I'M ON THE FREEWAY OR IN THE MIDDLE OF AN INTERSECTION TRYING TO MAKE A TURN, THE ENGINE JUST DIES. THIS ISSUE HAS THE POTENTIAL TO CREATE A VERY HAZARDOUS IF NOT LIFE THREATENING SITUATION.
NHTSA ODI #11321037
Mileage unknown · Apr 4, 2020
Engine
THE ENGINE CRADLE HAS RUSTED THROUGH. I UNDERSTAND THAT THERE HAS BEEN RECALLS IN PARTICULAR STATES TO REPAIR THIS ISSUE ON THIS MODEL OF CAR. I HAVE REPLACED STRUTS AND ALL DRIVE TRAIN WITH ALL NEW PARTS AND THE SLAMMING IS STILL PRESENT. REPAIR SHOP IDENTIFIED THE ENGINE CRADLE AFTER REMOVING AND REPLACING ALL COMPONENTS AND F…
Read full complaint
THE ENGINE CRADLE HAS RUSTED THROUGH. I UNDERSTAND THAT THERE HAS BEEN RECALLS IN PARTICULAR STATES TO REPAIR THIS ISSUE ON THIS MODEL OF CAR. I HAVE REPLACED STRUTS AND ALL DRIVE TRAIN WITH ALL NEW PARTS AND THE SLAMMING IS STILL PRESENT. REPAIR SHOP IDENTIFIED THE ENGINE CRADLE AFTER REMOVING AND REPLACING ALL COMPONENTS AND FINDING THE RUSTED OUT BALLS JOINTS IN THE ENGINE CRADLE AS THE SOURCE OF THE ISSUE.
NHTSA ODI #11320196
160,133 miles · Mar 30, 2020
SuspensionWheels
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT UPON TURNING THE STEERING WHEEL OR DRIVING OVER A BUMP, THERE WAS AN ABNORMAL NOISE COMING FROM THE DRIVER SIDE OF THE VEHICLE. UPON TAKING THE VEHICLE FOR AN OIL CHANGE, AN INDEPENDENT MECHANIC DISCOVERED THAT THE CROSSMEMBER BAR ON THE FRONT END OF THE VEHICLE …
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT UPON TURNING THE STEERING WHEEL OR DRIVING OVER A BUMP, THERE WAS AN ABNORMAL NOISE COMING FROM THE DRIVER SIDE OF THE VEHICLE. UPON TAKING THE VEHICLE FOR AN OIL CHANGE, AN INDEPENDENT MECHANIC DISCOVERED THAT THE CROSSMEMBER BAR ON THE FRONT END OF THE VEHICLE WAS SEVERELY CORRODED. THERE WERE NO WARNING LIGHTS ASSOCIATED WITH THE FAILURE. THE MECHANIC INFORMED THE CONTACT THAT THE CORROSION WAS A KNOWN DEFECT AND TO CALL THE MANUFACTURER FOR ADDITIONAL INFORMATION. THE CONTACT CALLED ZEIGLER CHRYSLER DODGE JEEP RAM OF DOWNERS GROVE LOCATED AT (2311 OGDEN AVE, DOWNERS GROVE, IL 60515), LARRY ROESCH CHRYSLER JEEP DODGE RAM LOCATED AT (200 W GRAND AVE., ELMHURST, IL 60126), AND DUPAGE CDJR LOCATED AT (433 E NORTH AVE., GLENDALE HEIGHTS, IL 60139), WHERE THE CONTACT WAS INFORMED THAT THE MANUFACTURER PROVIDED AN EXTENDED WARRANTY ON THE VEHICLE HOWEVER, THE WARRANTY PERIOD HAD EXPIRED. THE MANUFACTURER WAS ALSO NOTIFIED OF THE FAILURE AND PROVIDED THE SAME INFORMATION. THE VEHICLE HAD NOT BEEN REPAIRED. THE FAILURE MILEAGE WAS 160,133.
NHTSA ODI #11319708
85,000 miles · Mar 22, 2020
StructureSuspension
COMMON SUBFRAME CORROSION ON LOW MILEAGE 2007 VEHICLES CAUSING EXTREME SAFETY ISSUES WHILE DRIVING. WAS WARNED BY AUTO SHOP THAT THIS IS COMMON AND RENDERS SAFETY ISSUES TO DRIVER AS ENTIRE ENGINE COULD DROP WHEN DRIVING OR WHEEL SEPARATION, THAT COULD CAUSE SEVERE INJURY OR DEATH. NO RECALL OR WARRANTY ISSUED TO ME. THIS SHOUL…
Read full complaint
COMMON SUBFRAME CORROSION ON LOW MILEAGE 2007 VEHICLES CAUSING EXTREME SAFETY ISSUES WHILE DRIVING. WAS WARNED BY AUTO SHOP THAT THIS IS COMMON AND RENDERS SAFETY ISSUES TO DRIVER AS ENTIRE ENGINE COULD DROP WHEN DRIVING OR WHEEL SEPARATION, THAT COULD CAUSE SEVERE INJURY OR DEATH. NO RECALL OR WARRANTY ISSUED TO ME. THIS SHOULD BE A SAFETY RECALL AS COMMON AS IT IS.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
2007 Dodge Caliber Problems, Complaints & Recalls | Skip That Year
Illustration