IllustrationMY FRONT CARRIAGE THAT HOLDS UP THE ENGINE AND TIRE ALIGNMENT OUTSIDE SHELL RUSTING OUT ON THE BACK SIDE.
2007 Dodge Caliber
Owner reports · Recalls · Investigations
More warning signs than most Caliber years
Owner complaints for the 2007 Dodge Caliber are substantially higher than the model-year median of 165.
About this comparison →How this year compares
Owner complaints by model year
Compare all Caliber years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
820–25K
9925–50K
14450–75K
14575–100K
192100–150K
85150K+
747 reports with mileage · 137 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Suspension. Review the 255 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 197 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 158 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
54 crash reports18 fire reports28 injury reports
What owners actually said
884 reportsSO , THE CAR I PURCHASED ON AUG.2ND, OF THIS YEAR... HAS MANY ISSUES! FIRST OF ALL ABOUT 2 WEEKS INTO HAVING THE VEHICLE... I NEEDED EXHAUST WORK DONE... SHORTLY AFTER THAT.. I BEGAN EXPERIENCING SOME PULLING TO THE RIGHT WHEN I TOUCHED THE BREAK PEDAL, NOW I'M EXPERIENCING SOME WEIRD SITUATION UNDER THE FRONT OF THE CAR. WHICH …
Read full complaint
SO , THE CAR I PURCHASED ON AUG.2ND, OF THIS YEAR... HAS MANY ISSUES! FIRST OF ALL ABOUT 2 WEEKS INTO HAVING THE VEHICLE... I NEEDED EXHAUST WORK DONE... SHORTLY AFTER THAT.. I BEGAN EXPERIENCING SOME PULLING TO THE RIGHT WHEN I TOUCHED THE BREAK PEDAL, NOW I'M EXPERIENCING SOME WEIRD SITUATION UNDER THE FRONT OF THE CAR. WHICH IN FACT IS CAUSING THE CAR TO SHAKE AND NOW WHEN I TAP THE BREAK TO STOP THE VEHICLE THEIRS A LOUD NOISE AND WHEN I GIVE IT GAS.. IT SHREEKS! IT'S VERY TERRIFYING TO SAY THE LEAST... I WAS UNABLE TO DRIVE IT BACK TO MY RESIDENCE... I'M UNABLE TO DRIVE THIS VEHICLE AT ALL
THE TIPS IS SHORTING OUT. GOING TO COST 2200 TO FIX. THIS IS A RECALL IN OTHER VEHICLES AROUND THE SAME YEAR. WHY DOES IT NOT APPLY TO THE CALIBER. SEEMS TO BE AN ISSUE. LOOKED INTO SEVERAL FORUMS WITH SAME ISSUE THAT KEEPS POPPING UP.
THIS PROBLEM OCCURS WHEN THE VEHICLE IS STATIONARY AND IN MOTION. THE VEHICLE WILL START TO FREAK OUT BY LOSING ALL OF ITS GAUGES AND CONTROLS, ALSO THE AIR BAG, ELECTRICAL, ABS AND CHECK ENGINE WILL COME ON. THERE WAS NO WARNING SIGNS WHEN THIS INITIALLY OCCURRED. I TOOK IT TO A DEALER AND THEY CLAIMED THE IT WAS THE TIPM (TOT…
Read full complaint
THIS PROBLEM OCCURS WHEN THE VEHICLE IS STATIONARY AND IN MOTION. THE VEHICLE WILL START TO FREAK OUT BY LOSING ALL OF ITS GAUGES AND CONTROLS, ALSO THE AIR BAG, ELECTRICAL, ABS AND CHECK ENGINE WILL COME ON. THERE WAS NO WARNING SIGNS WHEN THIS INITIALLY OCCURRED. I TOOK IT TO A DEALER AND THEY CLAIMED THE IT WAS THE TIPM (TOTAL INTEGRATED POWER MODULE) AND ITS SUPER COMMON WITH DODGE PRODUCTS. I WAS INFORMED THAT THERE IS A RECALL ON OTHER DODGE PRODUCTS FOR THIS VERY ISSUE BUT NOT THE CALIBER. I DO NOT UNDERSTAND THIS NOR HOW IF THIS IS A PROBLEM ON OTHER MODELS FROM THE SAME YEAR IT CAN BE COVERED UNDER WARRANTY BUT NOT FOR THIS CAR.
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT VARIOUS SPEEDS, THE HEADLIGHTS FAILED TO ILLUMINATE. ADDITIONALLY, THE BRAKE LIGHTS REMAINED ILLUMINATED WHILE DRIVING. THE CONTACT THAT THE DRIVER'S AND PASSENGER'S SIDE BALL JOINTS AND TIE RODS WERE REPLACED SEVERAL TIMES AT BRANDYWINE CHRYSLER…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT VARIOUS SPEEDS, THE HEADLIGHTS FAILED TO ILLUMINATE. ADDITIONALLY, THE BRAKE LIGHTS REMAINED ILLUMINATED WHILE DRIVING. THE CONTACT THAT THE DRIVER'S AND PASSENGER'S SIDE BALL JOINTS AND TIE RODS WERE REPLACED SEVERAL TIMES AT BRANDYWINE CHRYSLER JEEP DODGE RAM (3807 KIRKWOOD HWY, WILMINGTON, DE 19808). THE MANUFACTURER WAS INFORMED OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 43,000.
I WAS DRIVING AND THE BATTERY LIGHT CAME ON. LATER ON WHEN ABOUT 100 MILES FROM HOME THERE ARE SEVERAL OTHER LIGHTS THAT COME ON AND THEN WHILE RUNNING APPROX 60MPH THE CAR JUST SHUTS DOWN IN THE MIDDLE OF THE ROAD. AFTER REPLACING THE ALTERNATOR AND BATTERY THE BATTERY LIGHT CONTINUES TO STAY ON. I TAKE THE CAR TO A LOCAL GARAG…
Read full complaint
I WAS DRIVING AND THE BATTERY LIGHT CAME ON. LATER ON WHEN ABOUT 100 MILES FROM HOME THERE ARE SEVERAL OTHER LIGHTS THAT COME ON AND THEN WHILE RUNNING APPROX 60MPH THE CAR JUST SHUTS DOWN IN THE MIDDLE OF THE ROAD. AFTER REPLACING THE ALTERNATOR AND BATTERY THE BATTERY LIGHT CONTINUES TO STAY ON. I TAKE THE CAR TO A LOCAL GARAGE TO FIND OUT THE TIPM NEEDS TO BE REPLACED WHICH APPEARS TO COST OVER $1000 IN WHICH I DO NOT HAVE TO SPEND.
I I HAVE CHANGED MULTIPLE TIMES THE SWAY BAR LINKS AND HAD TO PUT ON NEW STRUTS TWICE. THERE WAS SUPPOSED TO BE A RECALL ON THE CROSS MEMBER BAR AND WHEN I TOOK IT TO BE FIXED THE DEALER WOULD NOT HONOR THE RECALL ON THE BAR. IT IS NOW MAKING ONCE AGAIN A POPPING SOUND IN THE FRONT DRIVERS SIDE AND I AM WANTING TO ONCE AGAIN GE…
Read full complaint
I I HAVE CHANGED MULTIPLE TIMES THE SWAY BAR LINKS AND HAD TO PUT ON NEW STRUTS TWICE. THERE WAS SUPPOSED TO BE A RECALL ON THE CROSS MEMBER BAR AND WHEN I TOOK IT TO BE FIXED THE DEALER WOULD NOT HONOR THE RECALL ON THE BAR. IT IS NOW MAKING ONCE AGAIN A POPPING SOUND IN THE FRONT DRIVERS SIDE AND I AM WANTING TO ONCE AGAIN GET THE RECALL ON THE CAR THAT WAS SUPPOSED TO BE FIXED BEFORE.
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT 3-5 MPH, THERE WAS AN ABNORMAL SOUND COMING FROM UNDERNEATH THE VEHICLE NEAR THE DRIVER'S SIDE FRONT TIRE. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC AND THE CONTACT WAS INFORMED THAT THE ENGINE CRADLE NEEDED TO BE REPLACED. THE VEHICLE WAS…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT 3-5 MPH, THERE WAS AN ABNORMAL SOUND COMING FROM UNDERNEATH THE VEHICLE NEAR THE DRIVER'S SIDE FRONT TIRE. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC AND THE CONTACT WAS INFORMED THAT THE ENGINE CRADLE NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 93,500.
I RECENTLY PURCHASED THE VEHICLE FROM THE ORIGINAL OWNER. THE VEHICLE LIGHT FLASHES WHILE DRIVING. THE MILEAGE IS CURRENTLY 91K MILES. NOW THE LIGHTENING BOLT SYMBOL WILL NOT TURN OFF AND THE VEHICLE WILL NOT ACCELERATE OVER 39 MILES. I HAVE NOT BEEN ABLE TO DRIVE THE VEHICLE FOR OVER A WEEK.
I HAVE HAD THIS PROBLEM SINCE THE BEGINNING OF OWNERSHIP. THE CAR WON'T START, I HAVE HAD SO MANY BATTERIES THINKING THIS WAS THE PROBLEM. THE CAR WON'T START EVEN WITH A NEW BATTERY OR THE BATTERY WILL HAVE TO BE REPLACED WITHIN MONTHS. I PLAN TO GO SOMEWHERE AND CAN'T BECAUSE IT WON'T START...LIKE RIGHT NOW. I HAVEN'T BEEN …
Read full complaint
I HAVE HAD THIS PROBLEM SINCE THE BEGINNING OF OWNERSHIP. THE CAR WON'T START, I HAVE HAD SO MANY BATTERIES THINKING THIS WAS THE PROBLEM. THE CAR WON'T START EVEN WITH A NEW BATTERY OR THE BATTERY WILL HAVE TO BE REPLACED WITHIN MONTHS. I PLAN TO GO SOMEWHERE AND CAN'T BECAUSE IT WON'T START...LIKE RIGHT NOW. I HAVEN'T BEEN ABLE TO START IT IN DAYS. SOMETIMES BY WIGGLING THE WIRES I CAN START IT BUT NOW IT IS SO BAD IT WON'T START.
Official recalls
417V824000 · Equipment
Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
10V234000 · Vehicle Speed Control:accelerator Pedal
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
07V196000 · Wheels:hub
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
06V493000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.