NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
884 reportsMileage unknown · Oct 10, 2014
Electrical System
MY TOTAL INTEGRATED POWER MODULE (TIPM) IS OUT! MY LEFT HEAD LIGHTS WONT WORK, MY HORN GOES OFF AT RANDOM TIMES, MY AIRBAG LIGHTS KEEP FLASHING, MY WIPER BLADES SOMETIMES DO NOT WORK. THE CAR ACTS LIKE ITS COMPLETELY POSSESSED! THIS IS A DEFINITE SAFETY ISSUE AND A KNOWN PROBLEM WITH THIS MODEL! SOMETHING NEEDS TO BE DONE BEFOR…
Read full complaint
MY TOTAL INTEGRATED POWER MODULE (TIPM) IS OUT! MY LEFT HEAD LIGHTS WONT WORK, MY HORN GOES OFF AT RANDOM TIMES, MY AIRBAG LIGHTS KEEP FLASHING, MY WIPER BLADES SOMETIMES DO NOT WORK. THE CAR ACTS LIKE ITS COMPLETELY POSSESSED! THIS IS A DEFINITE SAFETY ISSUE AND A KNOWN PROBLEM WITH THIS MODEL! SOMETHING NEEDS TO BE DONE BEFORE SOMEONE DIES! *TR
NHTSA ODI #10643844
102,000 miles · Oct 9, 2014
Electrical SystemExterior Lighting
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT 40 MPH, THE DRIVER'S SIDE HEAD LIGHT FAILED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC. THE TECHNICIAN DIAGNOSED THAT THE TOTAL INTEGRATED POWER MODULE WAS FAULTY AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER W…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT WHILE DRIVING AT 40 MPH, THE DRIVER'S SIDE HEAD LIGHT FAILED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC. THE TECHNICIAN DIAGNOSED THAT THE TOTAL INTEGRATED POWER MODULE WAS FAULTY AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 102,000.
NHTSA ODI #10643639
140,000 miles · Oct 6, 2014
Power Train
WHEN I AM DRIVING ON THE FREEWAY FOR ANY DISTANCE OVER 30 MILES AND THE TEMPERATURE IS OVER 70 DEGREES OUTSIDE, THE TRANS OIL TEMP SIGNAL COMES ON AND I LOSS ALL POWER TO THE TRANSMISSION. THIS CAN BE A SERIOUS ISSUE, BECAUSE THIS HAPPEN ON THE FREEWAY / HIGHWAY. IT IS A CONTINUOUS PROBLEM. WHEN I INITIALLY TOOK IT TO THE DEALER…
Read full complaint
WHEN I AM DRIVING ON THE FREEWAY FOR ANY DISTANCE OVER 30 MILES AND THE TEMPERATURE IS OVER 70 DEGREES OUTSIDE, THE TRANS OIL TEMP SIGNAL COMES ON AND I LOSS ALL POWER TO THE TRANSMISSION. THIS CAN BE A SERIOUS ISSUE, BECAUSE THIS HAPPEN ON THE FREEWAY / HIGHWAY. IT IS A CONTINUOUS PROBLEM. WHEN I INITIALLY TOOK IT TO THE DEALERSHIP, I WAS TOLD THAT SINCE THEY COULDN'T RECREATE IT, THEY COULDN'T FIX IT. THIS PROBLEM HAS CAUSED ME TO LIMIT TRIPS OR BORROW / RENT A CAR TO GO ANYWHERE OF ANY DISTANCE. I HAVE HAD THIS ISSUE FOR OVER TWO YEARS, BUT DIDN'T REALIZE HOW MANY OTHER DODGE CALIBER OWNERS WERE EXPERIENCING THE SAME ISSUE UNTIL RECENTLY. *TR
NHTSA ODI #10641676
129,000 miles · Oct 4, 2014
Electrical SystemExterior Lighting
DRIVER SIDE HEADLAMP HAS GONE OUT DUE TO A TOTAL INTERGRATED POWER MODULE FAILURE. *TR
NHTSA ODI #10641420
30,000 miles · Sep 26, 2014
StructureSuspension
NO ACCIDENT THE TECH TOLD ME THAT THE CALIBER IS NOTORIOUS FOR HAVING A HORRIBLE SUSPENSION SYSTEM BECAUSE THE CAR IS TOO HEAVY FOR THE FRAME. REPLACED LOWER CONTROL ARM BARS, STRUTS SHOULD HAVE BEEN REPLACED AT 36,000 MILES, REPLACED INNER AND OUTER TIE ROD ENDS, TWICE WITHIN 1/1/2 YEAR, STRUTS STILL BAD. THE VEHICLE I…
Read full complaint
NO ACCIDENT THE TECH TOLD ME THAT THE CALIBER IS NOTORIOUS FOR HAVING A HORRIBLE SUSPENSION SYSTEM BECAUSE THE CAR IS TOO HEAVY FOR THE FRAME. REPLACED LOWER CONTROL ARM BARS, STRUTS SHOULD HAVE BEEN REPLACED AT 36,000 MILES, REPLACED INNER AND OUTER TIE ROD ENDS, TWICE WITHIN 1/1/2 YEAR, STRUTS STILL BAD. THE VEHICLE IS A ACCIDENT WAITING TO HAPPEN. CHRYSLER JUST KEEPS IGNORING THESE ISSUES. SAID THEY ARE GOING TO EXTENDED THE WARRANTY ONLY ON THE CROSSMEMBERS, HOWEVER THAT PART DIRECTLY RELATES TO THE3 LOWER CONTROL ARM BARS AND I ALREADY REPLACE. HTTP://WWW.CONSUMERAFFAIRS.COM/AUTOMOTIVE/DODGE_CALIBER.HTML. *TR
NHTSA ODI #10639313
170,000 miles · Sep 21, 2014
SteeringStructureSuspension
I HAVE A 2007 DODGE CALIBER AND THE SUB FRAME IS SO RUSTED THROUGH THAT IT CRACKED WHILE MY SON WAS DRIVING IT. THANKFULLY HE WAS COMING HOME AND IT HAPPENED COUPLE MINUTES FROM HOME. I CANNOT BELIEVE A CAR, THAT IS ONLY 7 YEARS OLD, CAN RUST SO SEVERELY IN SUCH A SHORT PERIOD OF TIME. I CANNOT BELIEVE DODGE HAS NOT ISSUED A …
Read full complaint
I HAVE A 2007 DODGE CALIBER AND THE SUB FRAME IS SO RUSTED THROUGH THAT IT CRACKED WHILE MY SON WAS DRIVING IT. THANKFULLY HE WAS COMING HOME AND IT HAPPENED COUPLE MINUTES FROM HOME. I CANNOT BELIEVE A CAR, THAT IS ONLY 7 YEARS OLD, CAN RUST SO SEVERELY IN SUCH A SHORT PERIOD OF TIME. I CANNOT BELIEVE DODGE HAS NOT ISSUED A RECALL ON THIS. WHAT ARE THEY WAITING FOR? ARE THEY WAITING FOR ENOUGH PEOPLE TO GET INTO ACCIDENTS AND POSSIBLY KILL SOMEBODY, BEFORE THE RECALL THIS MANUFACTURE DEFECT? THEY MUST HAVE SOME REALLY GOOD BEAN COUNTERS. WHEN I STARTED LOOKING ON THE INTERNET, I WAS SHOCKED TO SEE SO MANY COMPLAINTS FROM PEOPLE WITH THE EXACT SAME PROBLEM AS I AM HAVING, AND THEIR CARS WERE YOUNGER THEN MINE. I WAS SHOCKED TO FIND OUT THAT THERE HAVE NOT BEEN ANY RECALLS ISSUED FOR THIS. *TR
NHTSA ODI #10637862
149,000 miles · Sep 7, 2014
Electrical SystemExterior Lighting
HAD TO REPLACE THE ALTERNATOR .THE CHARGING LIGHT WAS COMING ON.NOW THE HEAD LIGHTS ARE NOT WORKING REPLACED BULBS STILL NOT WORKING NOT GETTING POWER TIPM ISSUE. *TR
NHTSA ODI #10631414
Mileage unknown · Sep 3, 2014
Electrical SystemEngine
2007 DODGE CALIBER. CONSUMER WRITES IN REGARDS TO CROSSMEMBER RECALL AND ELECTRICAL WIRE DAMAGES. *SMD THE CONSUMER STATED AFTER THE VEHICLE WAS TAKEN TO THE DEALER, 19 DAYS LATER IT WAS DISCOVERED THE ENGINE COVER WAS MISSING. WHICH RESULTED IN RODENTS ACCESSING THE ELECTRICAL WIRES AND CHEWING THEM.
NHTSA ODI #10629760
Mileage unknown · Aug 28, 2014
Vehicle Speed Control
2007 DODGE CALIBER. CONSUMER WRITES IN REGARDS TO ACCELERATOR PROBLEMS. *SMD THE CONSUMER STATED THE ACCELERATOR PEDAL WAS REPLACED, BUT NO LUCK RESOLVING THE LOSS OF POWER PROBLEM. ALSO, THE ABS LIGHT ILLUMINATED AND A BELL WOULD START ALARMING WHEN THE ACCELERATOR DIDN'T REACT AFTER BEING PRESSED. THE CONSUMER BELIEVED THE …
Read full complaint
2007 DODGE CALIBER. CONSUMER WRITES IN REGARDS TO ACCELERATOR PROBLEMS. *SMD THE CONSUMER STATED THE ACCELERATOR PEDAL WAS REPLACED, BUT NO LUCK RESOLVING THE LOSS OF POWER PROBLEM. ALSO, THE ABS LIGHT ILLUMINATED AND A BELL WOULD START ALARMING WHEN THE ACCELERATOR DIDN'T REACT AFTER BEING PRESSED. THE CONSUMER BELIEVED THE THROTTLE BODY GEAR WORE THE SPROCKET DOWN ON THE LOWEST GEAR. *JB
NHTSA ODI #10626720
6,000 miles · Aug 27, 2014
Fuel/propulsion System
THIS IS ANOTHER ISSUE I'VE HAD WITH THIS CAR SINCE I BOUGHT IT BACK AROUND THANKSGIVING 2006. THE CARS FUEL GAUGE DOES NOT GIVE AN ACCURATE READING. I'VE FOUND INFO ABOUT THIS PROBLEM ONLINE WHICH INVOLVES REPLACING THE FUEL SENDING UNIT HOSES OR SOMETHING. I CALLED CHRYSLER ABOUT THIS AND I CANT BELIEVE THEY DO NOT COVER THE CO…
Read full complaint
THIS IS ANOTHER ISSUE I'VE HAD WITH THIS CAR SINCE I BOUGHT IT BACK AROUND THANKSGIVING 2006. THE CARS FUEL GAUGE DOES NOT GIVE AN ACCURATE READING. I'VE FOUND INFO ABOUT THIS PROBLEM ONLINE WHICH INVOLVES REPLACING THE FUEL SENDING UNIT HOSES OR SOMETHING. I CALLED CHRYSLER ABOUT THIS AND I CANT BELIEVE THEY DO NOT COVER THE COST OF THIS OBVIOUS DEFECT. TONS OF INFO ON THE WEB ABOUT THIS ONE TOO. I'VE LIVED WITH THIS ISSUE AS WELL AS MY NUMEROUS SUSPENSION PROBLEMS. THANKFULLY I KNOW MY CARS MPG'S SO I CAN CALCULATE WHERE MY FUEL TANK SHOULD BE USING THE TRIP ODOMETER LIKE I DO ON MY MOTORCYCLE - STILL VERY ANNOYING AND SHOULD BE FIXED FREE OF CHARGE. *TR
NHTSA ODI #10628931
Official recalls
4Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.
Illustration