IllustrationTHE SUB-FRAME ON MY CALIBER IS RUSTED OUT. THIS IS ONLY 6 YRS OLD, AND DODGE SAY THERE IS NO WARRANTY.THERE WILL BE FATALITIES IF THIS IS NOT CORRECTED ON THESE VEHICLES. *TR
2007 Dodge Caliber
Owner reports · Recalls · Investigations
More warning signs than most Caliber years
Owner complaints for the 2007 Dodge Caliber are substantially higher than the model-year median of 165.
About this comparison →How this year compares
Owner complaints by model year
Compare all Caliber years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
820–25K
9925–50K
14450–75K
14575–100K
192100–150K
85150K+
747 reports with mileage · 137 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Suspension. Review the 255 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 197 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 158 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
54 crash reports18 fire reports28 injury reports
What owners actually said
884 reportsNOTICED THE DRIVER'S SIDE HEADLIGHT WAS OUT AGAIN WHILE I WAS DRIVING THROUGH A PARKING LOT. I PULLED INTO A PARKING SPOT AND TURNED THE LIGHTS OFF AND BACK ON AGAIN AND THEN BOTH HEADLIGHTS WERE WORKING. TOOK IT TO THE SHOP TODAY SINCE WE'VE HAD THE TIPM AND TIPM CONNECTOR REPLACED WITHIN THE LAST 6 MONTHS. THEY COULD NOT DUPLI…
Read full complaint
NOTICED THE DRIVER'S SIDE HEADLIGHT WAS OUT AGAIN WHILE I WAS DRIVING THROUGH A PARKING LOT. I PULLED INTO A PARKING SPOT AND TURNED THE LIGHTS OFF AND BACK ON AGAIN AND THEN BOTH HEADLIGHTS WERE WORKING. TOOK IT TO THE SHOP TODAY SINCE WE'VE HAD THE TIPM AND TIPM CONNECTOR REPLACED WITHIN THE LAST 6 MONTHS. THEY COULD NOT DUPLICATE THE HEADLIGHT NOT WORKING, BUT SAID THEY'D REPLACE THE TIPM SINCE IT'S STILL UNDER WARRANTY. WE'RE REALLY STARTING TO HATE THIS CAR. *TR
DRIVER'S SIDE HEADLIGHT WENT OUT AGAIN. AND THEN ONE DAY THE CAR WOULDN'T START. JUMPED THE CAR AND IT STARTED. WE JUST HAD THE TIPM REPLACED A FEW MONTHS AGO. THIS TIME THEY FOUND A BURNT TIPM CONNECTOR PIN. THEY REPLACED THE CONNECTOR AND COULD NOT DUPLICATE THE NO-START CONDITION. *TR
DRIVER'S SIDE HEADLIGHT IS OUT. GOT THE TIPM REPLACED FOR $700+. THAT'S WAY TOO EXPENSIVE FOR A HEADLIGHT. *TR
DRIVER'S SIDE HEADLIGHT WENT OUT. TOOK IT TO SHOP TO GET IT REPLACED. IT WAS NOT THE LIGHTBULB. THEY GOT IT FIXED, BUT SAID THE TIPM MAY BE FAULTY AND IT WILL NEED REPLACED IF HEADLIGHT GOES OUT AGAIN. A DAY LATER, THE HEADLIGHT WENT OUT AGAIN. *TR
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE HAVING AN OIL CHANGE PERFORMED, THE TECHNICIAN NOTIFIED THE CONTACT THAT THE REAR SUBFRAME WAS RUSTED AND DETERIORATING. THE TECHNICIAN STATED THAT THE REAR SUBFRAME NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE …
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. WHILE HAVING AN OIL CHANGE PERFORMED, THE TECHNICIAN NOTIFIED THE CONTACT THAT THE REAR SUBFRAME WAS RUSTED AND DETERIORATING. THE TECHNICIAN STATED THAT THE REAR SUBFRAME NEEDED TO BE REPLACED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 150,000.
MY TIPM WENT OUT ON MY CAR. IT'S BEEN OUT FOR THREE MONTHS NOW AND DODGE HAS NOT SENT THE PART FOR MY CAR YET. THEY ORIGINALLY SENT ME THE WRONG PART AND THEN I WAS TOLD THAT I WOULD RECEIVE THE CORRECT PART IN A WEEK. WELL, IT'S BEEN THREE FULL MONTHS NOW AND STILL NO PART. EVERY CALL TO DODGE IS SAYING THAT THE PART IF ON BACK…
Read full complaint
MY TIPM WENT OUT ON MY CAR. IT'S BEEN OUT FOR THREE MONTHS NOW AND DODGE HAS NOT SENT THE PART FOR MY CAR YET. THEY ORIGINALLY SENT ME THE WRONG PART AND THEN I WAS TOLD THAT I WOULD RECEIVE THE CORRECT PART IN A WEEK. WELL, IT'S BEEN THREE FULL MONTHS NOW AND STILL NO PART. EVERY CALL TO DODGE IS SAYING THAT THE PART IF ON BACK ORDER. NO RECALL ON THIS PART AT ALL. I HAVE NO VEHICLE TO GET AROUND IN AND I'M LOST AS TO WHAT I SHOULD DO NOW. IF THERE'S A CLASS ACTION LAWSUIT, I WOULD LOVE TO RECEIVE INFORMATION REGARDING IT. THIS IS AN ABSOLUTE NIGHTMARE. *TR
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE FRONT DRIVER SIDE HEADLIGHT FAILED TO ILLUMINATE. IN ADDITION, THE AIR BAG AND BRAKE WARNING INDICATORS ILLUMINATED AND THE HORN AND WINDSHIELD WIPERS WOULD ONLY OPERATE INTERMITTENTLY. THE DEALER STATED THAT THE TOTALLY INTEGRATED MODULE NEEDED TO BE REPLACE…
Read full complaint
TL* THE CONTACT OWNS A 2007 DODGE CALIBER. THE CONTACT STATED THAT THE FRONT DRIVER SIDE HEADLIGHT FAILED TO ILLUMINATE. IN ADDITION, THE AIR BAG AND BRAKE WARNING INDICATORS ILLUMINATED AND THE HORN AND WINDSHIELD WIPERS WOULD ONLY OPERATE INTERMITTENTLY. THE DEALER STATED THAT THE TOTALLY INTEGRATED MODULE NEEDED TO BE REPLACED. THE MANUFACTURER WAS NOT NOTIFIED. THE APPROXIMATE FAILURE MILEAGE WAS 114,000.
MY PARTNER AND I WERE AT FIRESTONE TO HAVE A OIL CHANGE FOR OUR CAR DONE. ONE OF THE REPAIR GUYS CAME OUT TO TELL US OUR TIE RODS ON OUR CAR WERE LOSE AND WOULD NEED TO BE REPLACED SOON. OUR CAR HAS ONLY A LITTLE OVER 61,000 MILES ON IT. TIE RODS ON A CAR ARE USUALLY REPLACED AT 120,000 TO 170,000 MILES. WE BOUGHT THIS CAR USED …
Read full complaint
MY PARTNER AND I WERE AT FIRESTONE TO HAVE A OIL CHANGE FOR OUR CAR DONE. ONE OF THE REPAIR GUYS CAME OUT TO TELL US OUR TIE RODS ON OUR CAR WERE LOSE AND WOULD NEED TO BE REPLACED SOON. OUR CAR HAS ONLY A LITTLE OVER 61,000 MILES ON IT. TIE RODS ON A CAR ARE USUALLY REPLACED AT 120,000 TO 170,000 MILES. WE BOUGHT THIS CAR USED AT A TOYOTA DEALERSHIP WITH ONLY ONE PREVIOUS OWNER. THE CARFAX WERE PROVIDED AND THE PREVIOUS OWNER BABIED THE CAR. THERE WERE NO PREVIOUS CAR WRECKS AND WE HAVE HAD NO CAR WRECKS EITHER. WE ARE AT A DISBELIEF, AS THIS SERIOUS OF AN ISSUE ON A CAR SHOULD NOT HAVE TO BE REPLACED UNTIL IT IS EXPECTED. WE TAKE VERY GOOD CARE OF OUR CAR. WE CHANGE THE OIL BEFORE IT IS DUE AND REGULARLY SCHEDULE CHECK UPS TO MAKE SURE THERE ARE NO MAJOR ISSUES. NOW WE ARE TAKING OUR CAR IN THIS WEEKEND TO GET THE TIE RODS DONE AND TO SEE IF ALSO CONTROL ARMS AND BALL JOINTS NEED TO BE REPLACED. FOR TIE RODS TO GO OUT WHILE DRIVING IS A SERIOUS ISSUE. WE COULD LOSE CONTROL OF THE CAR AND HURT OURSELVES OR SOMEONE ELSE. THIS IS A SERIOUS SAFETY ISSUE AND DODGE HAS A RESPONSIBILITY TO REPLACE MALFUNCTIONING PARTS OF THE CARS THIS IS HAPPENING TO. A TIE ROD SHOULD NOT GO OUT ON A CAR AT 61,000 MILES WHEN THE CAR IS TAKEN CARE OF. I DO NOT UNDERSTAND WHY A RECALL HAS NOT BEEN IN PLACE AND WHY DODGE HAS NOT COME FORWARD TO BE ACCOUNTABLE FOR THE ISSUES. THE TIE RODS WILL BE COSTING US $400 DOLLARS ALONE TO REPLACE AND IF BALL JOINTS AND CONTROL ARMS NEED TO BE REPLACED WELL OVER $1,000 DOLLARS FOR PARTS THAT ARE WEARING OUT PREMATURELY. IF OUR MECHANIC HAD NOT CAUGHT THE FAULTY PARTS MY NEW WIFE AND I MIGHT BE LYING IN A HOSPITAL SOMEWHERE HURT OR WORSE. AS RESPONSIBLE OWNERS WE ARE HAVING THE PARTS REPLACED AS SOON AS POSSIBLE. IF DODGE WOULD HAVE TAKEN RESPONSIBILITY TO HAVE THE PARTS REPLACED WE WOULDN'T HAVE TO WORRY ABOUT OUR SAFETY AND OTHERS SAFETY. *TR
SWAY BAR GASKETS & ENDLINKS ALONG WITH FRONT STRUTS & PLATES HAD TO GET REPLACED 2007 DODGE CALIBER 89K MILES LIGHTLY USED NOT AN ABUSED VEHICLE. *TR
Official recalls
417V824000 · Equipment
Dec 21, 2017
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy: Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
10V234000 · Vehicle Speed Control:accelerator Pedal
Jun 3, 2010
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.
Consequence & remedy
Consequence: SHOULD THE PEDAL BIND OR BECOME STUCK, IT CAN BE OVERCOME BY SMART BRAKES WHICH OVERRIDE THE ACCELERATOR PEDAL IN CERTAIN CONDITIONS.
Remedy: CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL INSPECT AND REPLACE ALL AFFECTED ACCELERATOR PEDAL ASSEMBLIES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 29, 2010. OWNERS MAY CONTACT CHRYSLER TOLL-FREE AT 1-800-853-1403.
07V196000 · Wheels:hub
May 7, 2007
CERTAIN PASSENGER VEHICLES EQUIPPED WITH REAR DISC BRAKES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 135, "LIGHT VEHICLE BRAKE SYSTEMS." THE LENGTH OF THE REAR WHEEL HUB MOUNTING BOLTS MAY PREVENT ACTUATION OF THE PARK BRAKE.
Consequence & remedy
Consequence: THIS COULD ALLOW UNINTENDED MOVEMENT OF THE VEHICLE UNDER CERTAIN CONDITIONS AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE REAR WHEEL HUB MOUNTING BOLTS AND REPAIR THE PARK BRAKE FREE OF CHARGE. THE RECALL BEGAN ON MAY 8, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
06V493000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module
Dec 29, 2006
ON CERTAIN VEHICLES, THE ANTILOCK BRAKE SYSTEM (ABS) CONTROL MODULE SOFTWARE MAY CAUSE THE REAR BRAKES TO LOCK UP DURING CERTAIN BRAKING CONDITIONS.
Consequence & remedy
Consequence: THIS COULD RESULT IN A LOSS OF VEHICLE CONTROL AND CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL UNIT. THE RECALL BEGAN ON FEBRUARY 19, 2007. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE10012 · Sticking Accelerator Pedal
Opened Apr 29, 2010 · Closed Aug 26, 2010
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified NHTSA that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V-234 for recall details.