← New search

2002 Chevrolet Avalanche 1500

Owner reports · Recalls · Investigations

More warning signs than most Avalanche 1500 years

Owner complaints for the 2002 Chevrolet Avalanche 1500 are substantially higher than the model-year median of 38.

About this comparison →

When problems were reported

Mileage at the reported incident

132 reports with mileage · 22 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Service Brakes. Review the 45 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes, Hydraulic. Review the 33 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Parking Brake. Review the 15 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

15 crash reports1 fire reports10 injury reports

Suspension complaints

5 reports
Clear category filter
78,000 miles · Apr 29, 2018
Fuel/propulsion SystemService BrakesSuspension

EXCESSIVE RUSTING OF THE FRAME, BRAKE LINES, TRANSMISSION LINES, AND FUEL LINES. THE BRAKE, TRANSMISSION AND FUEL LINES RUSTED COMPLETELY OUT AND REQUIRED A FULL REPLACEMENT. THE FRAME HAS EXTENSIVE RUST AND HAS DETERIORATED WELL BEYOND THE FRAME OF MY 2003 CAMARO Z28 WHICH IS 9 YEARS OLDER! THE TRUCK HAS LESS THAN 80K AND HAS B…

Read full complaint

EXCESSIVE RUSTING OF THE FRAME, BRAKE LINES, TRANSMISSION LINES, AND FUEL LINES. THE BRAKE, TRANSMISSION AND FUEL LINES RUSTED COMPLETELY OUT AND REQUIRED A FULL REPLACEMENT. THE FRAME HAS EXTENSIVE RUST AND HAS DETERIORATED WELL BEYOND THE FRAME OF MY 2003 CAMARO Z28 WHICH IS 9 YEARS OLDER! THE TRUCK HAS LESS THAN 80K AND HAS BEEN WELL MAINTAINED, SO THERE IS NO EXPLANATION FOR THE AMOUNT AND LEVEL OF RUST, EXCEPT THAT THERE WERE INFERIOR METALS AND MANUFACTURING MATERIALS USED IN ITS CONSTRUCTION.

NHTSA ODI #11090866

110,000 miles · Dec 29, 2009
Suspension

TL* THE CONTACT OWNS A 2002 CHEVROLET AVALANCHE 1500. THE REAR SWAY BAR BROKE, AND WORE OUT THE BRAKE LINE. THE VEHICLE WAS AT THE DEALER FOR OVER A MONTH BECAUSE THE PARTS WERE ON BACK ORDER. THE GM MANUFACTURER DOES NOT WANT TO COVER THE EXPENSE OF THE REPAIRS. THE FAILURE MILEAGE WAS 110,000. UPDATED 01/20/10 *BF UPDAT…

Read full complaint

TL* THE CONTACT OWNS A 2002 CHEVROLET AVALANCHE 1500. THE REAR SWAY BAR BROKE, AND WORE OUT THE BRAKE LINE. THE VEHICLE WAS AT THE DEALER FOR OVER A MONTH BECAUSE THE PARTS WERE ON BACK ORDER. THE GM MANUFACTURER DOES NOT WANT TO COVER THE EXPENSE OF THE REPAIRS. THE FAILURE MILEAGE WAS 110,000. UPDATED 01/20/10 *BF UPDATED 01/22/10.*JB

NHTSA ODI #10297385

108,000 miles · Jun 19, 2009
Suspension

TL*THE CONTACT OWNS A 2002 CHEVROLET AVALANCHE 1500. WHILE DRIVING 65 MPH, THE VEHICLE MADE A STRANGE NOISE. THE CONTACT NOTICED THAT ONE OF THE TIRES DETACHED FROM THE VEHICLE. THE HUB ASSEMBLIES WERE REPLACED THREE TIMES WITHIN FOUR MONTHS. THE CURRENT AND FAILURE MILEAGES WERE LESS THAN 108,000. UPDATED 07/24/09. *LJ

NHTSA ODI #10274329

200,000 miles · Feb 5, 2009
Suspension

2002 AVALANCHE SWAY BARS FRONT AND NO REAR S BREAKING AT BUSHINGS. LOOKS LIKE CORROSION AT THE BENDS? *TR

NHTSA ODI #10257615

102,800 miles · Aug 11, 2007
Service Brakes, HydraulicSuspension

2002 CHEVY AVALANCHE 1500 4X4 Z71 CORROSION IN THE FRONT WHEEL BEARING HUB CONTAMINATED THE TONE RING ON THE SPEED SENSOR CAUSING THE BRAKES NOT TO WORK CORRECTLY. LOCK UP OR NOT WORK AT ALL VERY DANGEROUS SITUATION. I REPLACED THE HUD AND IT CURED THE PROBLEM APPEARS THAT THE MOISTURE CAUSING THE CORROSION GOT THRU AT THE SPE…

Read full complaint

2002 CHEVY AVALANCHE 1500 4X4 Z71 CORROSION IN THE FRONT WHEEL BEARING HUB CONTAMINATED THE TONE RING ON THE SPEED SENSOR CAUSING THE BRAKES NOT TO WORK CORRECTLY. LOCK UP OR NOT WORK AT ALL VERY DANGEROUS SITUATION. I REPLACED THE HUD AND IT CURED THE PROBLEM APPEARS THAT THE MOISTURE CAUSING THE CORROSION GOT THRU AT THE SPEED SENSOR PLUG. I SEE CANADA ALREADY HAS A RECALL ON THIS WHY IS THE US TAKING SO LONG TO IMPLEMENT THE RECALL. DOES SOME ONE HAVE TO DIE FOR IT TO BE AN IMPORTANT SAFETY ISSUE. *TR

NHTSA ODI #10199306

Official recalls

0

No recalls in this snapshot.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA11001 · Brake Line Corrosion Failure

Opened Jan 5, 2011 · Closed Apr 8, 2015

Status: closed (inferred from source dates) · Service Brakes, Hydraulic; Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings

On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that NHTSA has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor t

Additional source detail variants (2)

Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings

On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that NHTSA has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor t

Service Brakes, Hydraulic

On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that NHTSA has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will monitor t