IllustrationDURING ACCIDENT FRONT BENCH SEAT LATCH FAILED CAUSING THE SEAT TO COLLAPSE, RIGHT FRONT PASSENGER SEAT BELT ALSO BECAME UNLATCHED, RESULTING IN INJURY. NLM
1990 Buick Century
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 1990 Buick Century do not stand out strongly from the model-year median of 28.
About this comparison →How this year compares
Owner complaints by model year
Compare all Century years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 33 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Seat Belts. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
1 crash reports3 fire reports3 injury reports
Seats complaints
5 reportsTHE FRONT DRIVER'S SIDE SPLIT SEAT IS COMING LOOSE FROM THE FLOOR. HAS NOT SEEN DEALER. *AK
FAILURE OF THE DRIVER SIDE SEAT, THE SEAT IS RECLINED TO THE BACK POSITION.*AK THE DRIVER'S SIDE SEAT TRAVELS ON RAILS BACK AND FOWARD, WHILE DRVING A METAL BRACKET ON THE LEFT SIDE, THAT ANCHORED THE SEAT TO THE FLOOR BROKE IN HALF, THEREFORE MAKING THE SEAT AS A WHOLE TILT BACKWARD.*JB
DRIVER'S SIDE FRONT SEAT TORE AWAY FROM CHASSIS; WHEN APPLYING BRAKES, SEAT WAS NOT STABLE, ROCKED BACK AND FORTH; COULD CAUSE ACCIDENT. TT
THE SEAT IS LOOSE IN THE TRACK ON ONE SIDE WHICH CAUSES THE SEAT TO SLIDE WHEN THE BRAKES ARE APPLIED. TT
Official recalls
295V173000 · Seat Belts:front:anchorage
Sep 15, 1995
THESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, "SEAT BELT ASSEMBLY ANCHORAGES."
Consequence & remedy
Consequence: CONSEQUENCE OF NON-COMPLIANCE: IN A COLLISON, STRESS CAN CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY OF THE VEHICLE. THE SAFETY BELT MAY NOT PROTECT AN OCCUPANT IN THE EVENT OF A VEHICLE CRASH.
Remedy: DEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH A NEW SHOULDER BOLT AND THREAD LOCKING ADHESIVE. ADDITIONALLY, NOISE CONTROL PATCHES WILL BE APPLIED AT EACH ANCHORAGE.
92V124000 · Seats:front Assembly:recliner
Sep 1, 1992
THE POWER SEAT OR RECLINER WIRING HARNESS CAN BE PINCHED OR CAN CHAFE ON THE SEAT FRAME OR SPRING SUPPORT ROD, WEARING THROUGH THE WIRE INSULATION AND CAUSING AN ELECTRICAL SHORT.
Consequence & remedy
Consequence: THE HIGH CURRENT CAUSED BY THE ELECTRICAL SHORT WELDS THECIRCUIT BREAKER ELEMENTS TOGETHER IN THE CLOSED POSITION, LEAVING THE CIRCUITUNPROTECTED AND GENERATING SUFFICIENT HEAT TO BURN THE WIRE INSULATION ANDIGNITE THE SEAT CUSHION MATERIAL.
Remedy: REPAIR ANY ABRADED WIRING AND REROUTE THE WIRING HARNESS USING A WIRING HARNESS CLIP.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA92024 · Sticking Throttle
Opened Jun 26, 1992 · Closed Jan 31, 1994
Status: closed (inferred from source dates) · Vehicle Speed Control:linkages
There is no summary currently available