2011 BMW 528I

The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.

The contact owns a 2011 BMW 528I. The contact stated while driving approximately 35 MPH, the check engine warning light illuminated, and the vehicle stalled. The contact pulled over, and after several attempts, the vehicle restarted. The contact was able to restart the vehicle, and the message "Drivetrain Malfunction" was displayed. The contact stated that the failure started recently and had occurred several times. Additionally, the vehicle was vibrating intermittently and lost motive power. The contact stated that occasionally the vehicle failed to accelerate above 15 MPH. The contact smelled the odor of gasoline inside the vehicle. The contact stated that the check engine warning light was illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 80,000.

The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Recall Campaign Number: 23V707000 (ENGINE AND ENGINE COOLING), and the vehicle was taken to a local dealer for the recall repair. The contact stated that while driving 40 MPH, the message "Drive Train Malfunction - Drive Moderately" was displayed. The vehicle was towed to the same dealer to be diagnosed. The contact was informed that faulty spark plugs had caused damage to a cylinder, and the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 123,568.

The contact owns a 2011 BMW 528i. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, following the recall repair, the vehicle was stalling with the check engine warning light illuminated. The contact stated that the vehicle was towed back to the same dealer. The contact stated that the dealer had diagnosed the vehicle and determined that the VANOS solenoids had failed and needed to be replaced. The vehicle was not repaired. The contact related the failure of the VANOS solenoids to the recall repair of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling). The manufacturer was informed of the failure. The failure mileage was approximately 112,000.

The contact owns a 2011 BMW 528I. The contact stated that while her husband was driving at or above 50 MPH on several occasions, the vehicle began shaking and running rough. The check engine warning light flashed on and off during one occasion and then remained illuminated. Additionally, on two occasions while stopped at a red light and a stop sign, the accelerator pedal was depressed, and the vehicle stalled. After two failed attempts to restart the vehicle, the vehicle was restarted several hours later. The vehicle was taken to the dealer and repaired under NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling). The contact was then advised by the dealer that the vehicle would not start. The manufacturer was notified of the failure but provided no assistance. The failure mileage was unknown.

The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the check engine warning light was illuminated. The vehicle was taken to the local dealer, where the contact was made aware of an oil leak. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure. The failure mileage was approximately 101,147. Parts distribution disconnect.

The contact owns a 2011 BMW 528I. The contact stated while driving approximately 35 MPH, the vehicle made an abnormal sound and stalled. The check engine warning light and brake warning light repeatedly illuminated on and off. The vehicle was difficult to control, causing the contact to drive over a pothole, causing the rear window glass to shatter. The contact's two children were in the rear seats, and one was cut in the back of the neck with the shattered glass. No medical attention was sought. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) prior to the failure; however, the part to do the recall repair was unavailable. The contact believed that the failure was caused by the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was drivable and was driven back to the residence. The vehicle was not repaired. A dealer was not contacted. The manufacturer was not notified of the failure. The failure mileage was 170,000. VIN tool confirms parts not available.

The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2011 BMW 528I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.