Owner reports · Recalls · Investigations
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →Owner complaints by model year
Compare all Concord years →Counts vary with age, sales and reporting. They are not failure rates.
No component reports in this snapshot.
Tap a category to read its complaints. One report may name several components.
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
No matching complaints in this snapshot.
Jul 6, 1981
THE CRUISE COMMAND ACTUATION CHAIN MAY CATCH ON THE THROTTLE LINKAGE, CAUSING THE THROTTLE TO REMAIN IN A PARTIALLY OPEN POSITION.
Consequence: Not supplied
Remedy: DEALER WILL REPLACE THE CRUISE COMMAND ACTUATION CHAIN ASSEMBLY, AND A SHIELD WILL BE MOUNTED ON THE THROTTLE LINKAGE AT NO CHARGE TO OWNER.
Jan 4, 1981
THE LEFT OR RIGHT FRONT SAFETY BELT ASSEMBLY MAY HAVE BEEN INSTALLED ON THE INCORRECT SIDE OF THE VEHICLE. THE SHOULDER BELT LOCKING MECHANISM MAY NOT FUNCTION UNDER RAPID DECELERATION. UNDER HARD BRAKING APPLICATIONS OR IN A COLLISION, THE SHOULDER PORTION OF THE SEAT BELT SYSTEM MAY FAIL TO PROPERLY RESTRAIN THE PASSENGER. THERE IS INCREASED RISK OF INJURY TO PASSENGERS WHO MAY CONTACT OTHER OBJECTS UNDER THESE CIRCUMSTANCES.
Consequence: Not supplied
Remedy: SEAT BELTS WILL BE INSPECTED FOR PROPER INSTALLATION AND, IF NECESSARY, SEAT BELTS WILL BE EITHER REPLACED OR RELOCATED IN CORRECT POSITION. WORK WILL BE COMPLETED WITHOUT CHARGE TO OWNERS.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Opened Nov 16, 1987 · Closed Jan 9, 1990
Status: closed (inferred from source dates) · Engine And Engine Cooling:engine
ANALYSIS:MANY OF THE REPORTS INDICATE THAT THE PLASTIC VALVE COVER OR THE\TV GASKETING MATERIAL LOSES ITS STRUCTURAL AND/OR SEALING INTEGRITY DUE TOTHE HIGH ENGINE TEMPERATURES ASSOCIATED WITH THE AMC 258 ENGINE.TESTINGPERFORMED BY A LOCAL FLEET CLEARLY DEMONSTRATED THAT UNDER NORMAL DRIVINGCONDITIONS, MOTOR OIL LEAKS IN THE VICINITY OF THE #3 OR #4 CYLINDERS (OVERTHE EXHAUST MANIFOLD) CAN RESULT IN A FIRE SERIOUS ENOUGH TO DESTROY AVEHICLE.AMC HAS ISSUED NUMEROUS TSB'S REGARDING THE PROPER/IMPROPER METHOD OF SEAL-ING THE VALVE COVER-HEAD INTERFACE.1981-84 AMC 6-CYLINDER ENGINES AREEQUIPPED WITH A PLASTIC VALVE COVER WHICH HAS 5 GUIDE PINS AND 2 FASTENERS.THE COVER USED IN LATER MODELS WAS RE-DESIGNED TO HAVE 5 ATTACHING POINTS,AND THIS NEW VALVE COVER CAN BE USED ON OLDER ENGINES BY MEANS OF AMODIFICATION KIT.AS EXPECTED, COMPLAINTS OF ENGINE FIRES IN 1985 MODELSDROPPED SIGNIFICANTLY, INDICATING THAT THE ADDITION OF THE NEW VALVE COVERMAY HAVE SOLVED THE PROBLEM.STATUS: IR TO THE MANUFACTURER SENT 12/1/87.PROPOSED ACTION: OPEN AN ENGINEERING ANALYSIS.===
Illustration