In stop and go traffic, when navigating round-abouts, and when accelerating away from controlled intersections (stop signals, stop signs, and yield signs), throttle control of the vehicle is inconsistent and unpredictable at slow speeds (between 1-3 mph). It behaves most poorly when attempting to accelerate after slowing, but no…
Read full complaint
In stop and go traffic, when navigating round-abouts, and when accelerating away from controlled intersections (stop signals, stop signs, and yield signs), throttle control of the vehicle is inconsistent and unpredictable at slow speeds (between 1-3 mph). It behaves most poorly when attempting to accelerate after slowing, but not completely stopping. A situation drivers encounter often at yield signs, round-abouts, and stop signals that change to green while you are slowing. I have attempted to enter traffic with appropriate time/space and sufficiently pressed the accelerator only to have my vehicle sit stationary for another moment or two before lurching forward. By this time, my margin for error with approaching traffic was rapidly closing. Other times my vehicle has lurched forward when I only pressed the accelerator a small amount. I am aware of the lag in accelerating, but the lag in that 1-3 mph range is not consistent, so I can't consistently adjust for it. Recently, the truck lurched suddenly out of the parking spot I was in as soon as I took my foot off of the brake pedal. I was attempting to roll forward to have a better view around the vehicle parked next to me (I had backed into the parking spot). But rather than roll slightly forward, the truck lurched a couple feet. I caught it before impeding approaching cross traffic. But the sudden lurch visibly surprised the other driver and my passenger in the vehicle with me. (I will use this incident as the incident for the date report below, but the unpredictable throttle response is an ongoing issue that I deal with daily). I reported this issue to the dealer shortly after purchase of the vehicle. A field engineer from Toyota came out and test drove my vehicle, but I have heard nothing since. The service writer at the dealership acknowledged that other gen 3 Tundras he has test driven have behaved in a similar manner. My previous gen Tundra did not behave this way, nor do my other vehicles.
NHTSA ODI #11462452
Mileage unknown · Jan 25, 2022
EnginePower TrainVehicle Speed Control
The engine V6 turbo wastegate is defective. The problem causes a Reduced Engine Power. Toyota and its dealership are trying to hide the problem from consumer. This vehicle is with Michaels Toyota of Bellevue in Washington. There are numerous YouTube buyer with the same problem. This problem requires the repair shop to lift up th…
Read full complaint
The engine V6 turbo wastegate is defective. The problem causes a Reduced Engine Power. Toyota and its dealership are trying to hide the problem from consumer. This vehicle is with Michaels Toyota of Bellevue in Washington. There are numerous YouTube buyer with the same problem. This problem requires the repair shop to lift up the body of the truck from the frame to get to the turbo part of the engine.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Owner letters were mailed August 28, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. Lexus' numbers for this recall are 25LB07 and 25LA07. This recall expands previous NHTSA recall number 24V381.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Consequence & remedy
Consequence: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will replace the engine assembly, free of charge. Owner letters were mailed between December 17, 2024 and February 19, 2025. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TB07/24TA07 and 24LB04/24LA04.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.
Consequence & remedy
Consequence: Unexpected vehicle movement can increase the risk of a crash.
Remedy: Dealers will update the transmission control ECU software, free of charge. Owner notification letters were mailed April 8, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TA02 and 24LA02.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: An overloaded vehicle increases the risk of a crash.
Remedy: SET will mail a new modified label, free of charge. Owner notification letters were mailed December 18, 2023. Owners may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET23B.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. The plastic fuel tube routed near metallic brake lines may chafe against the brake lines and become damaged, possibly resulting in a fuel leak.
Consequence & remedy
Consequence: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Dealers will install protective materials and a clamp on the fuel tube, free of charge. Owner letters were mailed November 6, 2024. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 23TB09/23TA09.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles that may be equipped with a Toyota genuine accessory tonneau cover. The tonneau cover attachment joints may come loose and allow the cover to detach.
Consequence & remedy
Consequence: A tonneau cover that detaches while driving can become a road hazard, increasing the risk of a crash.
Remedy: Owners of the subject vehicles will be notified by first class mail to return their vehicles to a Toyota dealer. Dealer will install new hardware (bolts, spacers, washers, nuts, rubber washers and cotter pins) to the existing bracket and tonneau cover. If the tonneau cover has tears or splits at the mounting holes to the extent that new hardware cannot be installed, it will be replaced with a new tonneau cover and hardware. Owners will receive a notice once the remedy becomes available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TB03/23TA03.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. A software error in the combination meter's electronic control unit (ECU) may cause the Instrument Panel LCD display to go blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."
Consequence & remedy
Consequence: A blank display will not show critical information such as the speedometer or warning lights, increasing the risk of a crash.
Remedy: Dealers will update the combination meter ECU software, free of charge. Owner notification letters are expected to be mailed April 17, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA02.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus NX250, NX350, and Toyota Tundra vehicles. The Skid Control ECU within the Brake Actuator Assembly may falsely detect an overcurrent condition of the Electronic Parking Brake (EPB) Actuator and enter a failsafe mode which prevents the EPB from being engaged. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
Consequence & remedy
Consequence: An electronic parking brake that cannot be engaged while in "park," may result in a vehicle rollaway, increasing the risk of a crash.
Remedy: Dealers will reprogram the Skid Control ECU, free of charge. Owner notification letters were mailed November 1, 2022. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 22TA11 and 22LA04.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. Incorrect programming of the parking-assist electronic control unit (ECU) software, may cause the front camera image to appear on the multimedia display instead of the rear camera image when the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview camera that fails to display the correct image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will reprogram the parking assist ECU, free of charge. Owner notification letters were mailed July 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA07.
Additional source detail variants (2)
Back Over Prevention:display Function
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. Incorrect programming of the parking-assist electronic control unit (ECU) software, may cause the front camera image to appear on the multimedia display instead of the rear camera image when the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that fails to display the correct image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will reprogram the parking assist ECU, free of charge. Owner notification letters were mailed July 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA07.
Electrical System:adas:parking Assist:software
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. Incorrect programming of the parking-assist electronic control unit (ECU) software, may cause the front camera image to appear on the multimedia display instead of the rear camera image when the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that fails to display the correct image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will reprogram the parking assist ECU, free of charge. Owner notification letters were mailed July 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA07.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles. The flange nuts on the axle shaft sub-assemblies can loosen over time and potentially cause one or both axle shaft sub-assemblies to separate from the axle housing.
Consequence & remedy
Consequence: Axle shaft separation can cause a loss of vehicle stability and brake performance, increasing the risk of a crash.
Remedy: Dealers will inspect the rear axle assembly, tighten the axle flange nuts, and replace any damaged axle-related components if necessary, free of charge. Owner notification letters are expected to be mailed July 15, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA05.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra vehicles equipped with a Panoramic View Monitor (PVM) system. The parking assist electronic control unit (ECU) software may prevent transmission of the rearview camera signal during cold weather, preventing the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview camera that does not display an image reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will reprogram the parking assist ECU software, free of charge. Owner notification letters were mailed June 2, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA04.
Additional source detail variants (2)
Back Over Prevention:display Function
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra vehicles equipped with a Panoramic View Monitor (PVM) system. The parking assist electronic control unit (ECU) software may prevent transmission of the rearview camera signal during cold weather, preventing the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that does not display an image reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will reprogram the parking assist ECU software, free of charge. Owner notification letters were mailed June 2, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA04.
Electrical System:software
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra vehicles equipped with a Panoramic View Monitor (PVM) system. The parking assist electronic control unit (ECU) software may prevent transmission of the rearview camera signal during cold weather, preventing the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that does not display an image reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will reprogram the parking assist ECU software, free of charge. Owner notification letters were mailed June 2, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA04.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2022 Toyota Tundra Problems, Complaints & Recalls | Skip That Year
Illustration