2012 Toyota Prius

The contact owns a 2012 Toyota Prius. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated, with an abnormal sound coming from the vehicle. The vehicle was taken to the dealer where it was diagnosed with brake booster failure. The contact was informed that the brake booster pump needed to be replaced. The vehicle was not repaired. The contact stated that the failure was a known failure with the vehicle. The manufacturer was made aware of the failure. The contact was informed that an undisclosed Extended Warranty Program had expired. In addition, the contact was informed that the repair was not covered. The failure mileage was approximately 175,000.

The vehicle is experiencing a suspected brake actuator / brake booster failure. Multiple warning lights appeared simultaneously, including ABS, Brake, Traction Control, and Master Warning lights. The vehicle produces a frequent buzzing noise from the brake system, especially at low speeds or when stopped. The noise occurs repeatedly when pressing the brake pedal, indicating the system is struggling to maintain hydraulic pressure. This condition raises serious safety concerns because it may reduce braking performance and increase stopping distance. Brake system failures present a significant risk to vehicle occupants and others on the road. After researching the issue, I learned this appears to be a common failure in Toyota Prius vehicles of similar model years, and Toyota previously issued extended warranty coverage for the brake booster/actuator assemblies. However, many vehicles now exceed the coverage limits despite the safety nature of the defect. I am submitting this complaint because a failing brake system is a critical safety hazard, and this issue appears widespread.

Vehicle check engine code C1391 (Antilock Brake System - abnormal leak in accumulator) came up on 2/5/2026. Recommended repair is to replace the Brake Booster Pump and Assembly, Brake Booster - over $1000 in parts alone. This WAS covered by an Extended Warranty by Toyota (10 years / 150K miles). I only have 120K miles at this time but am past the 10 year mark. However, it seems that this part will fail in every Prius given time and encourage NHTSA to monitor these failures and hold Toyota accountable to address post the 10 year / 150K mile mark.

Vehicle: 2012 Toyota Prius Mileage: Approximately 217,000 miles While driving normally in traffic, the vehicle experienced a sudden and unexpected brake system failure. Multiple warning lights illuminated simultaneously, including the red BRAKE warning light, ABS warning light, traction control light, and warning symbol (!). Shortly after, the vehicle began emitting an audible warning/beeping, and there was a sudden loss of power brake assist. The brake pedal behavior changed abruptly: the pedal became very soft initially, then became suddenly hard halfway through travel, This failure occurred while approaching another vehicle in traffic, and I narrowly avoided rear-ending the vehicle in front of me. The unexpected loss of brake assist created an immediate and dangerous situation, as the vehicle did not decelerate as expected when the brake pedal was applied. Due to the seriousness of the brake failure and safety risk, the vehicle was removed from service and towed. This incident represents a critical safety defect, as sudden loss of braking assist while driving poses a significant risk to vehicle occupants and other road users. I am reporting this incident to document the hazard and request investigation into the reliability and safety of the brake system design. I am requesting you to please issue a recall and reimburse me , as these parts are very expensive , it affected my financial situation, Thanks

My 2012 Toyota Prius plug in hybrid had just passed state inspections and was even looked at by a dealership a year ago with no reported issues. I brought up a whirring issue at the dealership when breaking but the dealership said that’s normal for a hybrid. In a matter of minutes while driving, the traction light, brake light, and ABS light came on as well as a groaning, whirring sound when breaking. Over time, the breaks failed and I could not stop the car, almost causing a wreck because I could not stop without putting all my body weight on the break pedal. When taking it to the Toyota dealership for a whole diagnostic, they said it was a break actuator and break booster failure that is known to happen with Prius’s. They quoted me $3000 for a repair and then marked my breaks as yellow not red on their sheet implying I could still drive it despite the dangerous situation of driving without functioning breaks. When looking into it, this seems to be a known and common problem with Prius’s due to a faulty manufactured part. Codes were c1391, wc1256, and c1252. I believe this part should be recalled and Toyota should fix these faulty parts, especially considering they inspected my car and did not mention it as an issue despite it being a known issue. I got a second opinion from Mavis Tires and they concurred with the diagnosis but could not fix it.

While driving, the vehicle experienced a sudden brake system malfunction without prior warning or gradual degradation. The vehicle was being operated under normal driving, road, and weather conditions. No recent brake service, repairs, or aftermarket modifications had been performed prior to the failure. Multiple warning lights illuminated on the dashboard, including the ABS warning light, brake warning light, and traction control warning light. Shortly after the warning lights appeared, the vehicle began emitting continuous warning beeps. Audible buzzing or pumping noises were also present from the brake system during the malfunction. During this event, brake performance was reduced and braking felt inconsistent. The brake pedal became hard at times and spongy at other times, requiring increased effort to slow the vehicle and resulting in unpredictable braking response. This created a safety concern while the vehicle was in motion. The driver was forced to alter driving behavior and exercise extreme caution due to reduced braking confidence and unpredictable pedal feel. The malfunction has occurred intermittently during normal driving. The condition temporarily resolves on its own and later reoccurs without corrective action. The suspected failed component is the brake actuator / ABS actuator assembly. A diagnostic scan retrieved fault codes C1252 (Brake Booster Pump Motor ON Time Abnormally Long), C1253 (Pump Motor Relay Malfunction), and C1256 (Accumulator Low Pressure), which are consistent with brake actuator malfunction. The failure occurred at approximately 154,000 miles. This vehicle model and generation have a documented history of premature brake actuator failures with similar safety-related symptoms reported by other owners. The condition places the driver and others at risk due to unpredictable braking behavior, reduced braking effectiveness, and repeated warning alarms while driving. Warning lamps and audible alerts continue intermittently.

The contact owns a 2012 Toyota Prius. The contact stated that while reversing, the driver's side rear wheel flipped over. The vehicle was towed to the dealer, where it was diagnosed with a corroded I-Beam assembly on the rear wheel. The contact was informed that the driver's side rear hub and the BRG assembly, rear suspension, and bolts needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 196,347.

Odometer Fraud. The contact’s son recently purchased a 2012 Toyota Prius. The vehicle was a private sale. After the purchase, it was discovered that there was a mileage discrepancy based on the Carfax report. At the time of purchase, the vehicle displayed 137,000 miles. However, the Carfax report listed the mileage as 281,586 miles, and the current mileage on the vehicle was 151,103.

While driving on a city road below the speed limit, braking was compromised leading to loss of traction and failure of the ABS system. During the incident, the brake, ABS, and engine warning lights all turned on and a collision was only avoided due to pumping of the brakes. Further investigation by a mechanic revealed a failure of the brake actuator system. Failure of this system has increased the stopping distance of the vehicle considerably and makes braking unreliable and unpredictable.