NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
216 reports11,746 miles · Jul 19, 2010
Engine And Engine Cooling
I HAVE A 2010 TOYOTA HIGHLANDER 4 CYLINDER THAT HAS AN ENGINE WHICH IS ACCELERATING AND SURGING DESPITE THAT IT HAS RECEIVED THE RECALL "FIX" FOR THE RECENT GAS PEDAL RECALL. EVEN AFTER THE RECALL MODIFICATION TO THE GAS PEDAL, THE ENGINE'S TACHOMETER JUMPS (OFTEN UP TO 5000 RPM) WHILE TRAVELING AT A STEADY SPEED OR NOT ACCELERA…
Read full complaint
I HAVE A 2010 TOYOTA HIGHLANDER 4 CYLINDER THAT HAS AN ENGINE WHICH IS ACCELERATING AND SURGING DESPITE THAT IT HAS RECEIVED THE RECALL "FIX" FOR THE RECENT GAS PEDAL RECALL. EVEN AFTER THE RECALL MODIFICATION TO THE GAS PEDAL, THE ENGINE'S TACHOMETER JUMPS (OFTEN UP TO 5000 RPM) WHILE TRAVELING AT A STEADY SPEED OR NOT ACCELERATING. THE PROBLEM OCCURS EVERY TIME IT IS DRIVEN AND IS EASILY DUPLICATED. MY LOCAL DEALER SERVICE HAD THE CAR FOR OVER 3 WEEKS AND WAS WORKING CLOSELY WITH TOYOTA CORP TECHNICIANS. THEY WERE ABLE TO REPRODUCE AND OBSERVE THE PROBLEM AND ACKNOWLEDGED IT. BUT THE VEHICLE WAS NOT PRODUCING ANY DIAGNOSTIC "ERROR CODES" AND THEY WERE UNABLE TO DIAGNOSE OR REPAIR THIS VEHICLE. IN A STRANGE TWIST THEY RETURNED THE VEHICLE TO ME AND "CHANGED THEIR TUNE". THE DEALER THEN SAID TOYOTA TECH'S STATED IT WAS A NORMAL GEAR CHANGE FUNCTION AND THAT THERE WAS NOTHING THEY COULD DO ABOUT THE SURGING. THE PROBLEM HAS GOTTEN PROGRESSIVELY WORSE AND I AM ABOUT TO TAKE IT BACK TO THE DEALER AND GO ANOTHER ROUND. PROBLEM OCCURS AT BOTH HIGH AND LOW SPEEDS, WITH AND WITHOUT USE OF CRUISE CONTROL. THE VEHICLE IS LESS THAN 1 YEAR OLD AND THE ENGINE BEHAVIOR IS QUITE SCARY. I DO NOT WANT TO HAVE MY WIFE AND CHILDREN GET INTO AN ACCIDENT. PLEASE GET INVOLVED. IN MY OPINION, THIS PROBLEM SEEMS TO BE RELATED TO THE VEHICLES ELECTRONIC ENGINE CONTROLS. A.S.I. *TR
NHTSA ODI #10343908
2,250 miles · Jul 15, 2010
Power Train
WE HAVE A BRAND NEW TOYOTA HIGHLANDER (2010) WITH ONLY 2200 MILES ON IT, WE HAVE RECENTLY NOTICED THAT AT HIGHWAY SPEEDS BETWEEN 58 - 64 MPH, IT CONSISTENTLY MAKES A VERY NOTICEABLE, RESONATING VIBRATION SOUND. CAR IS UNDER WARRANTY AND WE TOOK IT TO A TOYOTA DEALER TO HAVE IT CHECKED ON 7/15/10. THEY CONFIRMED THE PROBLEM BUT C…
Read full complaint
WE HAVE A BRAND NEW TOYOTA HIGHLANDER (2010) WITH ONLY 2200 MILES ON IT, WE HAVE RECENTLY NOTICED THAT AT HIGHWAY SPEEDS BETWEEN 58 - 64 MPH, IT CONSISTENTLY MAKES A VERY NOTICEABLE, RESONATING VIBRATION SOUND. CAR IS UNDER WARRANTY AND WE TOOK IT TO A TOYOTA DEALER TO HAVE IT CHECKED ON 7/15/10. THEY CONFIRMED THE PROBLEM BUT COULD NOT IDENTIFY WHY IT IS OCCURRING. THEY DROVE ANOTHER BRAND NEW HIGHLANDER FROM THEIR LOT FOR COMPARISON PURPOSES AND TOLD US THAT THE OTHER HIGHLANDER HAD THE EXACT SAME ISSUE. WE WERE TOLD THAT TOYOTA MIGHT ISSUE A TECHNICAL SAFETY BULLETIN (TSB) ABOUT THE PROBLEM AND A PROPOSED SOLUTION, WE WERE THEN ADVISED THAT WE SHOULD ASK ABOUT A TSB EVERY TIME WE BRING THE CAR IN FOR ROUTINE SERVICE. BOTTOM LINE - THE ISSUE STILL EXISTS AND NOONE SEEMS TO KNOW WHY. WE WERE TOLD TO DRIVE THE CAR BECAUSE THERE WAS NOTHING TO BE CONCERNED ABOUT THAT WAS OBVIOUS. SO, WE ARE NOW DRIVING THE CAR - AND STILL LISTENING TO IT VIBRATE BETWEEN 58 - 64 MPH. I HAVE BEEN A LIFELONG TOYOTA OWNER AND BOUGHT THIS NEW HIGHLANDER EVEN THOUGH TOYOTA WAS RECEIVING SO MUCH BAD PRESS. WE HAVE HAD A NUMBER OF ANNOYING QUALITY CONTROL ISSUES WITH IT - BUT THIS ONE IS PERPLEXING AND DISCONCERTING. I AM HOPING THAT NHTSA MIGHT GET TOYOTA'S ATTENTION ON THIS MATTER AS IT IS HIGHLY UNUSUAL AND UNEXPLAINABLE BY TOYOTA'S OWN TECHNICIANS. THANKS FOR ANY ASSISTANCE YOU CAN OFFER. I WOULD BE HAPPY TO COOPERATE WITH ANY FOLLOW-UP ACTION NHTSA MIGHT CHOOSE TO TAKE. *TR
NHTSA ODI #10343513
6,600 miles · Jul 10, 2010
Vehicle Speed Control
ON JULY 8 2010, MY 2010 TOYOTA HIGHLANDER HAD SUDDEN ACCELERATION PROBLEM WHEN I STOPPED AND BRAKED FOR THE TRAFFIC LIGHT. THIS HIGHLANDER HAS ONLY ABOUT 6,600 MILES ON IT AND IT NEVER HAD THE SUDDEN ACCELERATION PROBLEM BEFORE. THE DEALER HAD INSTALLED THE RECALL FIXES. UPDATED 07/19/10*BF UPDATED IVOQ 07/21/10.*JB *TR
NHTSA ODI #10342385
8,200 miles · Jul 8, 2010
Vehicle Speed Control
TL*THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. WHILE DRIVING 15- 20 MPH, THE CONTACT APPLIED THE BRAKES AND THE VEHICLE ACCELERATED WITHOUT WARNING. HE REMOVED HIS FOOT FROM THE BRAKE AND CHECKED TO MAKE SURE HE WASN'T APPLYING THE ACCELERATOR, AND HE WASN'T, SO HE PRESSED THE BRAKE PEDAL AGAIN AND THE VEHICLE ACCELERATED AGAIN. …
Read full complaint
TL*THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. WHILE DRIVING 15- 20 MPH, THE CONTACT APPLIED THE BRAKES AND THE VEHICLE ACCELERATED WITHOUT WARNING. HE REMOVED HIS FOOT FROM THE BRAKE AND CHECKED TO MAKE SURE HE WASN'T APPLYING THE ACCELERATOR, AND HE WASN'T, SO HE PRESSED THE BRAKE PEDAL AGAIN AND THE VEHICLE ACCELERATED AGAIN. IN ORDER TO STOP THE VEHICLE, THE CONTACT HAD TO APPLY THE EMERGENCY BRAKE. THE VEHICLE WAS TOWED TO THE DEALER WHO STATED THAT THE FAILURE COULD NOT BE DETERMINED. THERE WERE NO PRIOR WARNINGS. THE VEHICLE WAS NOT REPAIRED.. THE CURRENT AND FAILURE MILEAGES WERE 8,200. THE CONSUMER STATED ONCE HE STOPPED, HE PUT THE VEHICLE IN REVERSE AND THEN USED THE BRAKE TO STOP. THE BRAKE PEDAL THEN WORKED EFFECTIVELY. UPDATED 09/13/10*JB
NHTSA ODI #10342042
Mileage unknown · May 24, 2010
Vehicle Speed Control
FOLLOW-UP LTR TO NHTSA RE 4/8/10 CORRESPONDENCE ON BEHALF OF RE INCIDENT OF SUDDEN UNINTENDED ACCELERATION AFTER RECALL FIX BY DEALER ON HER 2010 TOYOTA HIGHLANDER. *KB THE CONSUMER BECAME CONCERNED ABOUT THE RECENT ACCELERATOR PEDAL ISSUE AND CONTACTED THE DEALER TO SEE IF SHE COULD GET OUT OF THE LEASE. THE DEALER INFORMED H…
Read full complaint
FOLLOW-UP LTR TO NHTSA RE 4/8/10 CORRESPONDENCE ON BEHALF OF RE INCIDENT OF SUDDEN UNINTENDED ACCELERATION AFTER RECALL FIX BY DEALER ON HER 2010 TOYOTA HIGHLANDER. *KB THE CONSUMER BECAME CONCERNED ABOUT THE RECENT ACCELERATOR PEDAL ISSUE AND CONTACTED THE DEALER TO SEE IF SHE COULD GET OUT OF THE LEASE. THE DEALER INFORMED HER THERE WAS A FIX TO THE PROBLEM, SO THE CONSUMER MADE AN APPOINTMENT ON FEBRUARY 15, 2010. ON MARCH 2, 2010 THE ACCELERATOR PEDAL BECAME STUCK MULTIPLE TIMES. TWICE, THE ACCELERATOR PEDAL STUCK WHEN TAKING OFF; IT WAS EXTREMELY HARD TO PUSH, TO THE POINT WHERE IT ACTUALLY WENT DOWN, AND THE VEHICLE JERKED. THEN ON THE WAY HOME, THE CONSUMER PUSHED THE BRAKE PEDAL DOWN TO SLOW DOWN AND NOTICED THE VEHICLE SEEMED TO BE GOING MUCH FASTER. SHE PUSHED HARDER AND HARDER ON THE BRAKE AND WHEN SHE LOOKED DOWN THE RPM'S WERE GOING STRAIGHT UP AND SHE WAS NOT SLOWING DOWN. SHE CONTINUED TO HOLD THE BRAKE PEDAL DOWN AND AFTER A FEW MINUTES THE BRAKES STARTED WORKING. THE CONSUMER CONTACTED THE DEALER THE NEXT DAY, BUT WAS INFORMED THERE WAS NOTHING THEY COULD DO SINCE THE FIX HAD ALREADY BEEN COMPLETED. *JB
NHTSA ODI #10331735
2,000 miles · May 20, 2010
Exterior Lighting
TL* THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. THE CONTACT STATED WHEN THE VEHICLE WAS PARKED HE WAS NOTIFIED THAT HIS HEADLIGHTS AND BRAKE LIGHTS WERE ILLUMINATED. THE CONTACT WAS ABLE TO SHUT THE LIGHTS OFF; HOWEVER, THEY CAME BACK ON AFTER THEY WERE SHUT OFF. THE VEHICLE WAS NOT TAKEN TO THE DEALER. THE FAILURE AND CURRENT MI…
Read full complaint
TL* THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. THE CONTACT STATED WHEN THE VEHICLE WAS PARKED HE WAS NOTIFIED THAT HIS HEADLIGHTS AND BRAKE LIGHTS WERE ILLUMINATED. THE CONTACT WAS ABLE TO SHUT THE LIGHTS OFF; HOWEVER, THEY CAME BACK ON AFTER THEY WERE SHUT OFF. THE VEHICLE WAS NOT TAKEN TO THE DEALER. THE FAILURE AND CURRENT MILEAGES WERE APPROXIMATELY 2,000.
NHTSA ODI #10331355
Mileage unknown · May 19, 2010
EquipmentVehicle Speed Control
TOYOTA RECALL ON 2010 TOYOTA HIGHLANDER -ACCELERATOR PEDAL REINFORCEMENT BAR INSTALLATION. I HAD RECENTLY BROUGHT MY TOYOTA HIGHLANDER IN FOR THE RECALL AND SERVICING THE ACCELERATOR PEDAL AND FOUND OUT THAT THE INSTALLATION WAS NOT CORRECTED WITH THE POSSIBILITY OF THE PEDAL COMING APART WHILE DRIVING AND CAUSING SERIOUS INJU…
Read full complaint
TOYOTA RECALL ON 2010 TOYOTA HIGHLANDER -ACCELERATOR PEDAL REINFORCEMENT BAR INSTALLATION. I HAD RECENTLY BROUGHT MY TOYOTA HIGHLANDER IN FOR THE RECALL AND SERVICING THE ACCELERATOR PEDAL AND FOUND OUT THAT THE INSTALLATION WAS NOT CORRECTED WITH THE POSSIBILITY OF THE PEDAL COMING APART WHILE DRIVING AND CAUSING SERIOUS INJURY OR HARM THE FIRST TIME AROUND. I NOW HAVE TO FACE THE VEHICLE HAVING "TO HAVE TO DISMANTLE/LIFT THE ENGINE AND OR HAVING TO MODIFY THE CROSS THREADED STUDS TO CORRECT THE FAULTY ACCELERATOR PEDAL." THEREBY ALTERING THE VEHICLE BY INSTALLING MODIFIED OR NEW STUDS TO THE VEHICLE. I BELIEVE THAT THIS COULD BE A SAFETY HAZARD AS TO THE NEW REPAIRS BEING IMPLEMENTED TO THE ACCELERATOR PEDALS. *TR
NHTSA ODI #10331303
1,700 miles · May 13, 2010
Vehicle Speed Control
TL*THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. WHILE DRIVING AT 5 MPH, THE VEHICLE SUDDENLY ACCELERATED. TO STOP THE VEHICLE, THE CONTACT SHIFTED INTO NEUTRAL AND TURNED OFF THE IGNITION. THE VEHICLE HAD NOT BEEN INSPECTED OR REPAIRED AT THE TIME OF THE COMPLAINT. THE CURRENT AND FAILURE MILEAGES WERE APPROXIMATELY 1,700.
NHTSA ODI #10330299
Mileage unknown · May 12, 2010
Vehicle Speed Control
BOUGHT 2010 HIGHLANDER, REPORT SAID THE DEALER HAD FIXED THE ACCELERATOR PROBLEM. THEY DID NOT FIX IT RIGHT AND PUT MY GAS PEDAL UPSIDE DOWN. ANOTHER DEALER FIXED IT AND TOLD ME. *TR
NHTSA ODI #10330046
3,000 miles · Apr 20, 2010
Vehicle Speed ControlCrash
TL*THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. THE CONTACT STATED WHILE SITTING IDLE IN A PARKING SPACE, THE VEHICLE ABNORMALLY ACCELERATED WITHOUT DRIVER INTENT. THE VEHICLE PROCEEDED TO JUMP A NEARBY CURB, CRASHED WITH ANOTHER VEHICLE AND THEN A TREE. THE CONTACT WAS ABLE TO BRING THE VEHICLE TO A STOP BY SHIFTING INTO NEUTRAL.…
Read full complaint
TL*THE CONTACT OWNS A 2010 TOYOTA HIGHLANDER. THE CONTACT STATED WHILE SITTING IDLE IN A PARKING SPACE, THE VEHICLE ABNORMALLY ACCELERATED WITHOUT DRIVER INTENT. THE VEHICLE PROCEEDED TO JUMP A NEARBY CURB, CRASHED WITH ANOTHER VEHICLE AND THEN A TREE. THE CONTACT WAS ABLE TO BRING THE VEHICLE TO A STOP BY SHIFTING INTO NEUTRAL. THE CONTACT DID NOT REPORT ANY INJURIES. THE MANUFACTURER WAS CONTACTED BUT WOULD NOT PROVIDE ANY ASSISTANCE. THE CONTACTS INSURANCE COMPANY WAS HANDLING THE INVESTIGATION. THE CURRENT AND FAILURE MILEAGES WERE 3,000.
NHTSA ODI #10326649
Official recalls
10Jun 2, 2016
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
Consequence & remedy
Consequence: If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy: SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Oct 22, 2015
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
Consequence & remedy
Consequence: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Nov 19, 2014
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
Consequence & remedy
Consequence: Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy: SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Apr 9, 2014
Toyota is recalling certain model year 2006-2008 RAV4, 2006-2010 Yaris, 2008-2010 Highlander, and 2009-2010 Tacoma, Corolla, Corolla Matrix and General Motors Pontiac Vibe vehicles. In the affected vehicles, the steering column assembly contains electrical connections to the driver's airbag module housed in a spiral cable assembly, which includes a Flexible Flat Cable (FFC). Due to the shape and location of the FFC's retainer, the FFC could become damaged when the steering wheel is turned.
Consequence & remedy
Consequence: If the FFC is damaged, connectivity to the driver's air bag module could be lost and the air bag deactivated. The failure of the driver's air bag to deploy in the event of a crash that typically necessitates deployment increases the risk of injury to the driver.
Remedy: Toyota will notify the Toyota vehicle owners, and General Motors will notify the Pontiac Vibe owners. Toyota sent owners an interim notification letter in May 2014 to advise owners of the recall. Toyota will mail owners a second letter when remedy parts are available. General Motors sent Pontiac Vibe owners an Interim letter on June 20, 2014 notifying them that parts are currently unavailable. General Motors sent notices to the Pontiac Vibe owners on September 15, 2014, that a remedy is available. The recall began on October 27, 2014. Owners may contact Toyota at 1-800-331-4331. Owners may contact General Motors at 1-800-762-2737.
Apr 9, 2013
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy: Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Jan 16, 2013
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
Consequence & remedy
Consequence: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Additional source detail variants (2)
Seats
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
Consequence: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Air Bags:frontal:sensor/control MODULE-INACTIVE
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
Consequence: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Feb 3, 2010
GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Consequence & remedy
Consequence: THIS DOES NOT MEET THE STANDARD REQUIREMENTS.
Remedy: DEALERS WILL MAIL TO CONSUMERS THE CORRECTED LABEL OR THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. DEALERS WILL ALSO CORRECT THE OWNER'S MANUAL. THE SAFETY RECALL BEGAN ON MAY 27, 2010. OWNERS MAY CONTACT GULF STATES TOYOTA AT 713-580-3300.
Feb 3, 2010
SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Consequence & remedy
Consequence: A DRIVER MAY OVERLOAD A VEHICLE WHICH MAY INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL MAIL TO CONSUMERS THE CORRECTED LABEL OR THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 27, 2010. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-800-301-6859.
Jan 27, 2010
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008-2010 HIGHLANDER, MODEL YEAR 2009-2010 COROLLA, VENZA AND MATRIX PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT. THIS RECALL IS AN EXPANSION OF A CAMPAIGN OF 3.8 MILLION OTHER TOYOTA VEHICLES ANNOUNCED IN 2009 FOR THE SAME ISSUE (SEE 09V-388).
Consequence & remedy
Consequence: A STUCK OPEN ACCELERATOR PEDAL MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.
Remedy: TOYOTA WILL MODIFY OR REPLACE THE ACCELERATOR PEDALS ON THE SUBJECT VEHICLES. FLOOR SURFACE MODIFICATIONS ARE ALSO BEING CONSIDERED AND WILL BE INCLUDED FOR ANY MODEL FOR WHICH IT IS DEEMED APPROPRIATE. INITIALLY, DEALERS WILL BE INSTRUCTED ON HOW TO RESHAPE THE ACCELERATOR PEDAL FOR THE REPAIR. AS REPLACEMENT PARTS WITH THE SAME SHAPE AS THE MODIFIED PEDAL BECOME AVAILABLE, THEY WILL BE MADE AVAILABLE TO THE DEALERS FOR THE REPAIR. CUSTOMERS WHO HAVE HAD THE PEDAL RESHAPE REMEDY COMPLETED WILL HAVE THE OPPORTUNITY TO RECEIVE A NEW PEDAL IF THEY DESIRE, AFTER REPLACEMENT PEDALS BECOME AVAILABLE. IN ADDITION, TOYOTA WILL REPLACE ANY TOYOTA ALL-WEATHER FLOOR MAT IN A SUBJECT VEHICLE WITH A NEWLY DESIGNED MAT, FREE OF CHARGE. FOR THOSE CUSTOMERS WHO HAVE THE PREVIOUS DESIGN ALL-WEATHER FLOOR MAT BUT DO NOT NEED OR WANT THE NEWLY DESIGNED ALL-WEATHER FLOOR MAT, TOYOTA WILL RECOVER THE PREVIOUS DESIGN ALL-WEATHER FLOOR MAT AND REIMBURSE ITS PRICE. THE SAFETY RECALL BEGAN MARCH 30, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Jan 21, 2010
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.
Consequence & remedy
Consequence: THE ACCELERATOR PEDAL MAY BECOME HARD TO DEPRESS, SLOW TO RETURN TO IDLE, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL INSTALL A REINFORCEMENT BAR IN THE ACCELERATOR PEDAL WHICH WILL ALLOW THE PEDAL TO OPERATE SMOOTHLY. GM WILL NOTIFY OWNERS FOR THE PONTIAC VIBE PLEASE SEE 10V-018. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON FEBRUARY 5, 2010 AND WILL BE COMPLETED ON MARCH 15, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA18006 · Steering Column Separation
Opened Nov 16, 2018 · Closed Apr 2, 2024
Status: closed (inferred from source dates) · Steering; Steering:column
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Steering:column
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Steering
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE18005 · Upper Steering Column Separation
Opened May 4, 2018 · Closed Nov 20, 2018
Status: closed (inferred from source dates) · Steering; Steering:column
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Additional source detail variants (2)
Steering:column
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Steering
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Illustration