Illustrationrattle in transmission. Car hesitates to accelerate randomly leading to unpredictable acceleration sometimes. Transmission is failing.
2019 Toyota Corolla
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2019 Toyota Corolla do not stand out strongly from the model-year median of 129.
About this comparison →How this year compares
Owner complaints by model year
Compare all Corolla years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
410–25K
925–50K
250–75K
275–100K
1100–150K
0150K+
55 reports with mileage · 147 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Power Train. Review the 54 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 39 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 31 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
23 crash reports1 fire reports10 injury reports
Power Train complaints
54 reportsAll 2019-2022 Toyota Corolla 6 Speed Manual Transmission cars are affected. The slave cylinder is a defective part that fails prematurely anywhere between the 20,000-70,000 mile range. The slave cylinder on this car is made out of plastic and is located inside of the transmission, when the slave cylinder fails, it leaks brake fl…
Read full complaint
All 2019-2022 Toyota Corolla 6 Speed Manual Transmission cars are affected. The slave cylinder is a defective part that fails prematurely anywhere between the 20,000-70,000 mile range. The slave cylinder on this car is made out of plastic and is located inside of the transmission, when the slave cylinder fails, it leaks brake fluid all over causing the car to lock into gear and not be able to shift which is a major safety risk when there is no signs of failure. My car locked up in the middle of a busy highway and had to be pushed off the side of the road. Not only is this a safety risk, but since the part is located inside of the transmission, which is not normal, it leaks brake fluid all over the clutch and flywheel, which will all need replacement. The dealership quotes between 4-5 thousand dollars to repair, and is not covered under warranty. Toyota knows that this part is a defective part because the new models received an updated slave cylinder made out of metal, rather than plastic, but no cars have been recalled. The car was towed to my local dealership and it is currently being worked on. The incident was reported to Toyota Corporate and a case was opened to investigate this issue. Every single model made between those years are effected and has caused thousands of people to be left with an expensive repair that is unavoidable.
Manual transmission intermittent failure to/rough to engage first gear and reverse. Clutch slave cylinder high rate of failure/total failure of manual transmission. Transmission incidents happen at least once per day.
My clutch slave cylinder broke. This is a known problem for 6mt toyota corolla hatchbacks yet there hasn't been a recall. Some go bad as soon as 40,000 miles which is very premature.
I have a 2019 Toyota Corolla Hatchback. The problems started on July 21st, 2025. While driving my 2019 Toyota Corolla Hatchback, I noted white exhaust smoke, even after the engine was warm. One week prior, I had filled the coolant reservoir, but when I checked it, the coolant was almost gone again. There were no visible leaks or…
Read full complaint
I have a 2019 Toyota Corolla Hatchback. The problems started on July 21st, 2025. While driving my 2019 Toyota Corolla Hatchback, I noted white exhaust smoke, even after the engine was warm. One week prior, I had filled the coolant reservoir, but when I checked it, the coolant was almost gone again. There were no visible leaks or puddles under the car. I refilled the coolant, but within days the car began shaking severely upon startup and emitted a coolant-burning smell. 5 minutes after, multiple warning lights illuminated on the dashboard simultaneously. I replaced the car battery, and the warnings disappeared. However, while merging onto the freeway, the same warning lights came back, the car lost power, and I could not accelerate above ~25 mph. If this occurred in heavy traffic, it could lead to a serious collision. I exited the freeway and had the car towed. DTCs from the independent mechanic and the Toyota dealer included: P11ED00 P030085 P030027 P030200 (Cylinder 2 misfire) C142571 (Stop light relay actuator stuck) U1117 B2284 B15AD The Toyota dealer identified a “Port Injector #2 malfunction” and recommended replacing all four injectors (~$2,000) but could not confirm this would fix it. They noted a coolant-burning smell but advised addressing the misfire first before further diagnosis. There is an active class action lawsuit alleging that 2019–2023 Toyota Corolla and RAV4 models have defective coolant bypass valves that may cause engine issues, overheating, or coolant loss without visible leaks. This matches the coolant loss, white exhaust smoke, and eventual power loss while driving. I request that NHTSA investigate this issue in connection to the reported coolant bypass valve defects affecting 2019–2023 Toyota Corolla models.
Slave cylinder failure. 90,000 miles. Multiple complaints about the issue.
premature failure of clutch components: throwout bearing, clutch slave cylinder (which doubles as master brake cylinder). This type of failure, particularly when vehicle is in motion, will prevent the ability to change gears, as well as potential for brake failure if loss of fluid is great enough. This is a clear and obvious roa…
Read full complaint
premature failure of clutch components: throwout bearing, clutch slave cylinder (which doubles as master brake cylinder). This type of failure, particularly when vehicle is in motion, will prevent the ability to change gears, as well as potential for brake failure if loss of fluid is great enough. This is a clear and obvious road hazard and the failure occurs within or just outside of factory warranty period and Toyota corp has been unwilling to pay for repairs on this particular failure. This system will fail without warning and there's no indication as to when this part will fail
Clutch throwout bearing went out at 69,000. Clutch pedal began getting stuck half way through pedal travel, then got stuck to floor. Lost all clutch operation.
As I was driving my check engine light turned and also another message saying “Drive-Start control malfunction”. A few second after another light came one showing “Engine coolant Temp high. On 11/24/24 I experienced this mechanical failure as I was driving. I was driving behind another car, where my car suddenly lost power and…
Read full complaint
As I was driving my check engine light turned and also another message saying “Drive-Start control malfunction”. A few second after another light came one showing “Engine coolant Temp high. On 11/24/24 I experienced this mechanical failure as I was driving. I was driving behind another car, where my car suddenly lost power and randomly accelerated almost causing me to crash behind the car in front of me. Thankfully I had time to press on the brakes to prevent me from crashing. I also did some research to see if other drivers also experienced this fault and seems that a lot of people with these Toyota Corolla and RAV4 models. I also found that an active lawsuit is ongoing against Toyota regarding this same issue. This definitely should be something that needs to be recalled as it puts our lives at risks to either crash or even catch on fire due to overheating. My vehicle gets serviced regularly.
The transmission slave cylinder on this vehicle leaks and causes multiple issues with the transmission. it is a known issue among all manual transmission owners and resulting on average 4000 dollar repair.
Official recalls
520V024000 · Air Bags: Air Bag/restraint Control Module
Jan 17, 2020
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2011-2019 Corolla, 2011-2013 Matrix, 2012-2018 Avalon, and 2013-2018 Avalon Hybrid vehicles. During certain crashes, the air bag electronic control unit (ECU) may malfunction, possibly disabling the deployment of the air bags and/or seat belt pretensioners.
Consequence & remedy
Consequence: In the event of a crash, air bags and/or seat belt pretensioners that do not deploy as intended may increase the risk of injury.
Remedy: Toyota will notify owners, and dealers will inspect the ECU and install a noise filter between the air bag control module and its wire harness, as necessary, free of charge. Owners were notified of the safety risk beginning March 2, 2020. A second letter notifying owners of the remedy repair will be mailed between March 16, 2020 and June 27, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 20TB03, 20TA03 and 20TA05.
20V012000 · Fuel System, Gasoline:delivery:fuel Pump
Jan 13, 2020
Toyota Motor Engineering & Manufacturing (Toyota) recalled certain 2018-2019 4Runner, Highlander, Camry, Land Cruiser, Sequoia, Sienna, Tacoma and Tundra, and Lexus RC 300, RC 350, GS 350, GX 460, IS 300, LC 500, LS 500, LX 570, RX 350L, and 2019 Toyota Avalon and Corolla, and certain Lexus NX 300, and ES 350 vehicles on January 13, 2020. On March 4, 2020, Toyota expanded the recall to include certain 2014-2015 Toyota 4Runner and Land Cruiser, 2018 Avalon, Corolla, 2014 FJ Cruiser, 2017 Sienna and Lexus 2018 ES 350, 2018-2019 GS 300, 2013-2014 GS350, 2014-2015 GX 460, IS 350 and LX 570, 2014 IS F, 2018-2019 IS 350, LC 500H and LS 500H, 2013-2015 LS 460, 2015 NX 200T and RC350, 2017 RC 200T and RX 350. Toyota also removed the 2018-2019 Toyota 4Runner and Land Cruiser and 2018-2019 Lexus GX 460 and LX 570 and 2019 NX300 from inclusion in this recall. On March 19, 2020, Toyota expanded the recall to include 2015 Lexus GS350 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
Consequence & remedy
Consequence: If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.
Remedy: Toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began May 4, 2020. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20TB02 and 20TA02 for Toyota vehicles and 20LB01 and 20LA01 for Lexus vehicles.
19V503000 · Equipment:other:labels
Jun 28, 2019
Southeast Toyota Distributors, LLC (SET) is recalling certain 2017-2019 Toyota Camry, Corolla, Rav4, Sienna, and Yaris iA vehicles equipped with factory-installed floor mats. The load carrying capacity modification label may be incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
Remedy: SET will notify owners and provide a corrected label for placement over the inaccurate label, free of charge. The recall began August 23, 2019. Owners may contact Toyota customer service at 1-888-270-9371. SET's number for this recall is SET19A.
19V244000 · Equipment:other:labels
Mar 27, 2019
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
Remedy: GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
18V901000 · Power Train:automatic Transmission:torque Converter
Dec 19, 2018
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota Corolla hatchback vehicles equipped with Continuously Variable Transmissions (CVT). The pump impeller blades within the torque converter may detach, especially when driven under high load, potentially causing a vehicle stall.
Consequence & remedy
Consequence: A vehicle stall, especially when driving a high rate of speed, can increase the risk of a crash.
Remedy: Toyota has notified owners, and dealers will replace the CVT and torque converter, free of charge. The recall began April 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J17/J07.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA19001 · Electrical Overstress
Opened Apr 19, 2019 · Closed Sep 19, 2024
Status: closed (inferred from source dates) · Air Bags: Air Bag/restraint Control Module
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.