2022 Subaru Outback

The contact owns a 2022 Subaru Outback. The contact stated that while coming to a stop on several occasions, the vehicle unexpectedly stalled. Several unknown warning lights were illuminated. The vehicle was able to be restarted. The vehicle was taken to the dealer. The contact was informed that the battery was functioning properly. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 36,249.

The contact owns a 2022 Subaru Outback. The contact stated that while driving and coming to a stop, there was an abnormal oil-burning odor coming from the vehicle. The vehicle was taken to the dealer to be diagnosed. The dealer determined that there was an oil leak coming from the lower oil pan. There was oil dripping onto the exhaust system, creating a potential fire hazard. The manufacturer was notified of the failure. The approximate failure mileage was 53,400.

The contact owns a 2022 Subaru Outback. The contact stated that while operating the vehicle, there was a whining sound coming from the transmission, and the vehicle was jerking while driving. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure, but no assistance was offered. The failure mileage was approximately 45,000. The VIN was not available.

The component that failed is the cowl panel weather stripping/seal located at the base of the windshield on my 2022 Subaru Outback. The material is visibly peeling and deteriorating despite the vehicle having only approximately 23,000 miles. The defective component is still installed on the vehicle and is available for inspection upon request. While this issue has not yet caused a direct accident, it creates a potential safety concern due to possible water intrusion and degradation of sealing integrity in an area critical to protecting components beneath the windshield. Over time, this could lead to visibility issues, corrosion, or damage to surrounding systems. The issue has been confirmed by an authorized Subaru dealership, which inspected the vehicle. Subaru of America also reviewed the case in coordination with the dealership. Subaru of America has acknowledged that design changes were made to the cowl panel in later model years, but denied assistance for my vehicle. The manufacturer concluded—without providing specific evidence—that the failure was due to “outside influence and environmental factors.” The vehicle has not been inspected by police or insurance representatives, as no accident has occurred. There were no warning lamps, messages, or prior indicators before the failure. The deterioration appears to have developed prematurely under normal usage conditions. Given the low mileage, the visible material failure, and the existence of design revisions, I believe this issue is consistent with a premature failure and potential design or material defect, rather than environmental wear.

I am reporting a critical safety failure involving an improperly installed (wrong year) passenger-side airbag in my 2022 Subaru Outback Wilderness, which was negligently missed for nearly two years by multiple Subaru service departments. This is a pervasive life-safety defect and an extensive failure in manufacturer inspection protocols. Chain of Negligence: 1. Initial Misleading Certification: Shortly after my purchase, the vehicle underwent a "certified" multi-point safety inspection at a Subaru retailer in Ohio, which negligently certified the vehicle as safe with a critical safety defect present. 2. Systemic Dealer Misdiagnosis: Over the subsequent nearly two years, I took my vehicle to multiple other Subaru dealership service departments, actively showing them a persistent visual misalignment of the passenger-side trim. Despite active complaints, no dealership took the proper time to diagnose the underlying cause, and they missed the critical safety defect. 3. Discovery by Chance: Critically, there were no warning lights, messages, or other electronic indicators. The only symptom was the visual misalignment. The true cause was only traced back to the wrong part after I personally spoke with a Subaru parts department team member who was resourceful enough to figure it out. This finding was subsequently officially certified as correct by the service team at Mike Shaw Subaru, which finally provided documentation that the component was incorrect. Safety Risk: The incorrect airbag component poses an immediate and incalculable life-safety risk, as its deployment behavior is unknown and potentially compromised. This unaddressed safety risk was allowed to continue for nearly two years due to repeated inspection failures. Manufacturer Response Failure: Subaru of America has been formally notified of this systemic safety defect and the complete failure of their retailer network’s inspection protocols. After missing multiple self-imposed deadlines, they continue t

The contact owns a 2022 Subaru Outback. The contact stated after starting the vehicle and driving at an undisclosed speed, the infotainment system inadvertently reset or went blank, causing the Reverse Automatic Braking (RAB) System to become inoperable. The RAB System warning light was illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and informed the contact to take the vehicle to the dealer to be diagnosed. The failure mileage was approximately 45,000.

I have multiple malfunction codes on my car. without any incident in the car I have 4 separate codes of airbag ECU malfunction (3) and airbag ECU power supply voltage. B1149 Airbag ECU Power Supply Voltage History B1195 Airbag ECU Malfunction Current B1196 Airbag ECU Malfunction Current B1185 Airbag ECU Malfunction Current This has caused failure of safety components in my car. Warning lights caused me to pull the codes and evaluate the problems. The vehicle is available for inspection upon request. Seems to be a problem with these components in older vehicles as well.

I am writing to report what I believe is a significant ergonomic issue with my vehicle. Every time I drive the car—even for short trips—I experience pain on the right side and toward the back of my knee. I have owned the vehicle for several weeks and have made numerous adjustments to the seat position in an effort to resolve the issue, but the pain has persisted. After researching reviews and feedback from other owners of the same model, I believe the problem may be related to the design and placement of the center console and pedal alignment. Specifically, the center console appears to be quite large and positioned very close to the gas pedal, and/or the brake pedal seems to be shifted further to the left than expected. This positioning appears to cause my right knee to overextend when braking. Because I live in a city environment and frequently encounter stop-and-go traffic, this issue is constant and has become unmanageable. Although I truly enjoy every other aspect of this vehicle, the ongoing pain makes it impossible for me to continue driving it comfortably or safely. As a result, I will be trading in the vehicle for a different model, despite my overall satisfaction with its other features. I wanted to formally document this concern in case it is helpful for future design considerations or evaluations, particularly if other drivers are experiencing similar discomfort. Thank you for your time and attention to this matter.