IllustrationVEHICLE WAS AT DEALERSHIP FOR BRAKE REPAIR. MECHANIC NOTICED 3 ENGINE MOUNTS HAD TO BE REPLACED.*AK
1994 Saab 9000
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all 9000 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 4 of 14 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 4 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes, Hydraulic. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports2 injury reports
Service Brakes, Hydraulic complaints
3 reportsCONSUMER APPLIED BRAKES AT 55-60 MPH, THERE WAS A LOUD NOISE AND PEDAL WENT TO THE FLOOR. DEALER DETERMINED THAT BRAKE LINE WAS CRUSHED DUE TO ENGINE MOVEMENT.*AK
OTHER: PASSENGER'S AIR BAG ASSEMBLY REPLACED.
Official recalls
499V109000 · Air Bags:frontal:sensor/control MODULE-INACTIVE
May 6, 1999
VEHICLE DESCRIPTION: PASSENGER VEHICLES. MOISTURE CAN ENTER THE AIR BAG INFLATABLE RESTRAINT ELECTRONIC CONTROL MODULE (ECM) AND CAUSE CORROSION ON PORTIONS OF THE ECM PRINTER CIRCUIT BOARDS.
Consequence & remedy
Consequence: THIS CORROSION CAN POSSIBLY CREATE OPEN CONNECTIONS IN CIRCUITS WHICH CONTROL THE RESTRAINT DEPLOYMENT, POSSIBLY CAUSING INADVERTENT AIR BAG DEPLOYMENT.
Remedy: DEALERS WILL INSPECT THE EXTERIOR OF THE ECM. IF THERE IS NO INDICATION OF MOISTURE, A COVER WILL BE INSTALLED OVER THE ECM. IF THERE IS INDICATION OF MOISTURE, THE DEALER WILL REPLACE THE ECM AND INSTALL A COVER OVER THE NEW ECM.
95V067000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module
Mar 29, 1995
MOISTURE CAN FOLLOW THE ELECTRICAL HARNESS AND ENTER THE PRESSURE SWITCH CONNECTOR CAUSING CORROSION AND MALFUNCTION OF THE SWITCH.
Consequence & remedy
Consequence: THE CORROSION CAUSES A DETERIORATION OF THE ELECTRICALSWITCH CONNECTION AND CAN RESULT IN FALSE ILLUMINATION OF ABS AND/OR THE BRAKE WARNING LIGHTS AND/OR THE LOSS OF POWER ASSISTANCE BECAUSE OF NO HYDRAULIC PUMPOPERATION. LOSS OF POWER ASSIST INCREASES THE DRIVER'S BRAKE PEDAL EFFORT REQUIRED FOR STOPPING WHICH CAN RESULT IN EXTENDED BRAKING DISTANCES.
Remedy: DEALERS WILL INSPECT THE ELECTRICAL CONNECTIONS TO THE ABS PRESSURE SWITCH TERMINALS FOR CORROSION AND INSTALL A SHRINK HOSE TO THE WIRING HARNESS TO AVOID MOISTURE ENTERING THE CONNECTION. PRESSURE SWITCHES WITH CORRODED CONNECTORS WILL BE REPLACED.
94V126000 · Engine And Engine Cooling:cooling System
Jul 8, 1994
DURING LOW ENERGY FRONTAL IMPACT COLLISIONS, THE FRONT CROSSMEMBER CAN CONTACT THE METAL TUBING PORTION OF THE COOLER HOSE ASSEMBLY; AND/OR THE HOSE ASSEMBLY CAN BREAK AND LEAK OIL ONTO THE HOT EXHAUST MANIFOLD OR THE TURBOCHARGER.
Consequence & remedy
Consequence: OIL LEAKING ON THESE HOT ENGINE SURFACES CAN IGNITE AND CAUSE A VEHICULAR FIRE.
Remedy: DEALERS WILL INSTALL A PROTECTIVE COVER WHICH WILL PROTECT THE COOLER AND HOSES FROM OTHER STRUCTURAL COMPONENTS IN LOW ENERGY FRONT IMPACTS.
94V084000 · Exterior Lighting:brake Lights
May 2, 1994
ONE OF THE BULBS IN EACH OF THE BRAKE LIGHT LOWER OUTBOARD LAMP ASSEMBLIES MAY NOT HAVE BEEN PROPERLY WIRED, RESULTING IN IMPROPER TAIL LIGHT ILLUMINATION ON BRAKE APPLICATION. THIS DOES NOT CONFORM TO THE REQUIREMENTS OF FMVSS NO 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Consequence & remedy
Consequence: CONSEQUENCE OF NON-COMPLIANCE: IMPROPER ILLUMINATION OF BRAKE LIGHTS DURING BRAKE APPLICATION MAY NOT SIGNAL FOLLOWING DRIVERS OF THE OPERATOR'S INTENT TO SLOW OR STOP AND COULD RESULT IN A VEHICLE COLLISION.
Remedy: DEALERS WILL MODIFY THE BRAKE LIGHT OUTBOARD LAMP ASSEMBLIES TO MEET FMVSS REQUIREMENTS.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1SQ98006 · Audio System Fires
Opened Apr 22, 1998 · Closed May 8, 1998
Status: closed (inferred from source dates) · Electrical System
SEE RESUME FOR DETAILS.