2021 RAM 2500

This problem first occurred on a state highway in [XXX] in 2023 and again in 2026 (this incident.) While driving south on XXX, there was an undulation/slight bump in the interstate while in a mild right hand curve. My vehicles brakes engaged without my input and slowed me down from 70mph to 35mph with traffic behind me. My gas accelerator and brake pedal were unresponsive from user input. At no point was my vehicle out of control to trigger such aggressive braking from my ESC, ERM, or ABS. The concern here is that thankfully this was on dry roads and traffic was far enough behind me to avoid a collision. My concern is this happening in winter weather/icy/wet roads, or with significant traffic behind me causing a possible high speed rear-end vehicle accident. There was a safety recall for ESC/ABS a few years ago on my vehicle that I dealt with through the dealer. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I have a seized brake caliper that is a direct result of a faulty brake hose. The brakes were looked at by a brake specialist business and I was told the brake hoses had to be replaced as well as the calipers, rotors and pads on the front. I took it to the Lake City, Florida dealer looking for a recall after reading online that some 2021 Ram 2500 trucks had brake hose recalls. They told me there was no recall on my particular truck for brake issues. However, when they quoted me there price and reason they needed to repair is that it had a seized brake caliper and all components are now no good. They also told me the brake hoses need to be replaced due to the passenger side brake hose having collapsed internally but they want me to pay $3500 to repair. This issue is a direct result of a faulty brake hose that they said collapsed. There are other trucks that have recalls for the same failure. Why is mine not covered under a recall with the safety issue that has developed? I need these parts covered as well as all the parts that have to be replaced due to the faulty hose. Please let me know what to do.

The integrated brake controller fails to provide braking to my travel trailer when attempting to stop. Multiple times this has pushed my truck into an intersection. There are no warning lights or failure messages. The brake controller is configured correctly as the issue has only been occurring the past few months and it was working as intended prior.

While driving in stop & go traffic traveling at speeds less than 15mph, when I stepped on the brake pedal to slow / stop my RAM, the brake pedal failed to activate the brakes and the vehicle continue in a forward motion causing my RAM to collide with the vehicle traveling in front of me. After the collision, my RAM pushed the vehicle I hit into the center shoulder of the freeway. My RAM continued its forward motion (up an shallow grade) for another 1/4 mi. My constant stabbing and continual pressure failed to stop or slow my RAM. I eventually I brought my vehicle to a stop by depressing the "emergency brake pedal". While I was attempting to stop my RAM in appeared the throttle continued to deliver the engine power even though my right foot was on the brake pedal.

The contact owns a 2021 Ram 2500. The contact stated while driving approximately 30 MPH, the vehicle lost ABS functionality. The contact stated that while depressing the brake pedal, the vehicle failed to slow as needed, causing the vehicle to rear-end another vehicle. The contacted stated that the driver of the other vehicle sustained unknown injuries while the contact sustained neck and back injury. The contact stated that there was no police report filed. The vehicle was towed to an independent mechanic but was not diagnosed nor repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 30,000.

The contact owns a 2021 Ram 2500. The contact stated while driving 60 MPH, he heard an abnormal noise from the front passenger’s side of the vehicle. The contact stated the brake control warning light was illuminated. The contact was attempting to park on the side of the road but while depressing the brake pedal, the vehicle failed to stop as designed. The contact started downshifting and used the parking brake to stop the vehicle. The vehicle was not drivable. The contact towed the vehicle to his residence and had an independent mechanic inspect the vehicle. The contact was informed that the front passenger wheel bearing hub assembly needed to be replaced. The contact called the local dealer and made them aware of the failure. The vehicle was not diagnosed or repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 60,000.

traveling at slow speeds the motor has abruptly died, loss of steering, acceleration, and brakes were a result. Message came up on dash to shift the truck to park. The parking bake automatically was applied when vehicle slowed to approximately 3 mph leaving the truck stranded in the middle of a intersection one time and once in the roadway. Shifting the truck to park and the truck started up as if nothing had happened. No codes no check engine light.