2025 Polestar Polestar 3

Changing the gear to Drive while car is already in Drive is the normal way to put the car on cruise control at highway speeds. This should not be permitted when car is under a certain speed. However, it appears you can turn on cruise control when the car is at 0 mph. When car is already in Drive and at a stop (0 mph), shifting gear changer into drive again, and letting foot off brake and lightly tapping the gas pedals causes car to suddenly lurch forward in a highly disproportional manner to any light pressure applied to the gas pedal. Car then continues to increase speed from 0 mph at an alarming rate as if cruise control is on. This is extremely unsafe. One can accidentally shift the gear into drive more than once while at 0mph, and cause the car to unexpectedly lunge forward into someone or something. Moreover, the current gear is not clearly displayed at any time in a large enough font. The gear indicator is only displayed in tiny font on a small screen atop the steering column, and the gear indicator can be easily blocked by the spoke of the steering wheel when wheel is turned. At no time is the current gear indicator displayed on the larger head unit. Furthermore, there is no audible chime or indication that gear has been switched like in other cars. Without the chime, one can easily put the gear into to Drive twice, entering this dangerous condition where car can lurch forward as if cruise control is suddenly on.

When parking the car and putting the car in reverse, the cameras are activated and two views are displayed simultaneously on the head unit: 1) a 360 view is displayed; and 2) rear camera view is displayed. However when putting the car in Drive and then back in Reverse again, only the 360 view displays but NOT the Rear view camera. Subsequently drive / reverse sequences during a parking maneuver do not cause the rear camera to display again, The only way to turn the rear camera back on is to keep the car in reverse and then fiddle with the head unit to tap the appropriate button sequences to turn the rear camera back on. This is not safe.

I have had the vehicle for 4 months with no charging issues. All of a sudden the other day, my car would not charge at home AC 14-50 outlet using the Polestar supplied cable at 48 amp max setting to achieve the 9-11 kW charging rate. I lowered the max amp to 15, and the car started charging at a very slow rate of 3 kW. I also tried plugging my car into a slow Chargepoint AC charger and it would not charge at all. I contacted Polestar service and after a few hours, I was finally able to get a hold of the technician and he said there is a defective OBC that needs to be changed but it would take at least 2 weeks and that he would not have a loaner available for me until May. He said it was up to me if I wanted to still enjoy my car and just deal with it charging slower at home or charge using DC fast charger instead, which defeats the purpose and convenience of having an EV to begin with.

Activation and persistence of the rearview camera. This situation occurs when selecting reverse, drive and then reverse again in short order (i.e. parallel parking, maneuvering to get into our garage with a narrow driveway and tight turn). When I initially select Reverse, the center display shows both the 360 view and the reverse camera - perfect. When I select Drive to move forward a couple of feet and realign the car, the display switches to show just the 360 view - makes sense. When I then put it back into Reverse to continue parking, the rear view camera does not come back on and only the 360 view is visible. Based on my reading of the regulations, if the car is in reverse, the rear view camera should be active and show on the screen. This is a significant safety issue and one that Polestar claims is not and that their software is operating as designed.

On a curvy, 2-lane road, moderate traffic both ways, my vehicle performed unnecessary emergency braking for on oncoming vehicle while negotiating an “S” curve. There was no vehicle in my lane in front of me, the oncoming vehicle was squarely in its lane, I was in my lane, both of us had several cars following behind. But we had both just passed the apex of our respective curves and were approaching each other in the “middle” of the “S”. All warning lights flashed, my car applied emergency braking, and vehicle behind me took evasive action to the right shoulder in order to avoid a rear collision.

Lane Keeping and Lane Departure: Lane Departure warnings cannot be disabled, but steering interventions also cannot be disabled, contrary to manual’s instructions and control panel button. With feature turned “off”, vehicle still intervenes and self-steers. Car has steered back toward potholes and bicyclists that I was trying to avoid. I could have destroyed a wheel in the 1st case or killed somebody in the second case.