I HAVE A 2010 MAZDASPEED 3. AT ONLY 5 YEARS OLD THE CLEAR COAT IS ALREADY PEELING HORRIBLY ON THE HOOD AND NOW STARTING ON THE FENDERS AND TRIM GOING ALONG THE WINDSHIELD. I HAVE THE VELOCITY RED PAINT AND CANNOT BELIEVE THE CLEAR COAT IS PEELING THIS BADLY WITHIN ONLY 5 YEARS. VEHICLE IS KEPT UNDER NORMAL CONDITIONS.
2010 Mazda MAZDASPEED3
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all MAZDASPEED3 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
31 reports with mileage · 1 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Seats. Review the 18 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
Unknown Or Other complaints
4 reportsDASHBOARD IS MELTING, THE GLARE FROM IT MAKES IT HARD TO SEE TRAFFIC UP AHEAD AND IS VERY DISTRACTING AT TIMES. DEALERSHIP SAID IT IS A COMON PROBLEM WITH MAZDA VEHICLES, USING VISORS TO COVER THE WINDSHIELD DOES NOT STOP THE MELTING. INSIDE OF THE WINDSHIELD IS EXTREMELY STREAKY DUE TO THE DASH MELTING AND OILS LEAVING RESIDUE …
Read full complaint
DASHBOARD IS MELTING, THE GLARE FROM IT MAKES IT HARD TO SEE TRAFFIC UP AHEAD AND IS VERY DISTRACTING AT TIMES. DEALERSHIP SAID IT IS A COMON PROBLEM WITH MAZDA VEHICLES, USING VISORS TO COVER THE WINDSHIELD DOES NOT STOP THE MELTING. INSIDE OF THE WINDSHIELD IS EXTREMELY STREAKY DUE TO THE DASH MELTING AND OILS LEAVING RESIDUE ON THE WINDSHIELD.
DASHBOARD IS MELTING AND TURNING INTO A STICKY GOOEY MESS THAT VERY GLOSSY AND CREATING A LARGE AMOUNT OF REFLECTIVE GLARE. THE REFLECTIVE GLARE OFF THE DASHBOARD ONTO THE WINDSHIELD IS SO BRIGHT THAT IT MAKES IT DIFFICULT TO SEE OUT OF THE WINDSHIELD ON BRIGHT OR SUNNY DAYS.
MY DASHBOARD HAS BEEN MELTING NOW FOR THE PAST 2 YEARS. IT IS GETTING WORSE. I LIVE IN FLORIDA. THIS IS AN OBVIOUS DEFECT FROM MAZDA AND THEY REFUSE TO REPLACE. THE MELTING DASHBOARD CAUSES EXTREME GLARE ON SUNNY DAYS. ENOUGH TO AFFECT VISIBILITY OUT THE FRONT WINDSHIELD. SINCE IT IS LITERALLY COOKING I AM CONCERNED THAT THERE A…
Read full complaint
MY DASHBOARD HAS BEEN MELTING NOW FOR THE PAST 2 YEARS. IT IS GETTING WORSE. I LIVE IN FLORIDA. THIS IS AN OBVIOUS DEFECT FROM MAZDA AND THEY REFUSE TO REPLACE. THE MELTING DASHBOARD CAUSES EXTREME GLARE ON SUNNY DAYS. ENOUGH TO AFFECT VISIBILITY OUT THE FRONT WINDSHIELD. SINCE IT IS LITERALLY COOKING I AM CONCERNED THAT THERE ARE HEALTH HAZARDS AND TOXINS ASSOCIATED WITH IT MELTING. THIS SITUATION IS HAZARDOUS AND A RECALL NEEDS TO BE ENFORCED ASAP.
Official recalls
217V082000 · Seats
Feb 9, 2017
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
Consequence & remedy
Consequence: If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
Remedy: Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
16V644000 · Structure:body:hatchback/liftgate
Sep 6, 2016
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
Consequence & remedy
Consequence: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.
Illustration