I WAS DRIVING DOWN THE FREEWAY IN THE RAIN AND THE WINDSHIELD WIPERS QUIT FUNCTIONING. I PULLED OVER AND CHECKED THE FUSES FINDING BOTH FUSES AFFECTING THE WIPERS WERE IN WORKING ORDER. WHILE PULLED OVER, I ALSO NOTICED MY HEADLIGHTS WERE NO LONGER ON. I CHECKED THE FUSES RELATED TO THE HEADLIGHTS AND THESE WERE ALSO IN WORKING …
Read full complaint
I WAS DRIVING DOWN THE FREEWAY IN THE RAIN AND THE WINDSHIELD WIPERS QUIT FUNCTIONING. I PULLED OVER AND CHECKED THE FUSES FINDING BOTH FUSES AFFECTING THE WIPERS WERE IN WORKING ORDER. WHILE PULLED OVER, I ALSO NOTICED MY HEADLIGHTS WERE NO LONGER ON. I CHECKED THE FUSES RELATED TO THE HEADLIGHTS AND THESE WERE ALSO IN WORKING ORDER. AS I WAS NOT IN A GOOD LOCATION TO LEAVE MY CAR FOR ANY PERIOD OF TIME, I DROVE MY CAR A FEW MORE MILES DOWN THE ROAD. DURING THIS TIME, THE WARNING FOR THE "SMART BREAKING SYSTEM FAILURE" ALSO CAME ON. I WAS ABLE TO GET MY VEHICLE INTO THE DEALERSHIP AND THEY HAVE DIAGNOSED THE PROBLEM AS A FAILURE OF THE FRONT BODY CONTROL MODULE. I NOTICED THERE IS AN ACTIVE RECALL ON THE 2016 MAZDA 3 FOR THE VERY SAME ISSUE. I ASKED THE DEALER ABOUT THIS AND THEY SAID MY VEHICLE IS NOT AFFECTED BY THIS RECALL. BASED ON THE SYMPTOMS MY CAR HAS, AND BEING THE SAME YEAR AS CARS AFFECTED, I WOULD STRONGLY DISAGREE.
NHTSA ODI #11299751
200 miles · May 7, 2016
Exterior Lighting
HAVE HAD THE VEHICLE FOR ONE WEEK. HEADLIGHTS ARE UNSAFE. IF ONE IS TO DRAW A LINE FROM 8 TO 4 ON THE CLOCK EVERYTHING ABOVE THAT IS NOT ILLUMINATED. DEATH TRAP. MAZDA DEALER WILL NOT TAKE THE CAR BACK OR REFUND MY MONEY. I'M AFRAID TO DRIVE IT AT NIGHT.
Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.
Consequence & remedy
Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.
Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.
Additional source detail variants (3)
Air Bags:sensor:occupant Classification
Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.
Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.
Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.
Steering:electric Power Assist System
Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.
Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.
Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.
Seats
Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.
Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.
Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2016 Mazda MAZDA6 Problems, Complaints & Recalls | Skip That Year
Illustration