← New search

2016 Mazda MAZDA6

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2016 Mazda MAZDA6 do not stand out strongly from the model-year median of 105.

About this comparison →

When problems were reported

Mileage at the reported incident

54 reports with mileage · 23 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Electrical System. Review the 11 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Power Train. Review the 11 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes. Review the 11 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

9 crash reports0 fire reports6 injury reports

Electronic Stability Control (esc) complaints

2 reports
Clear category filter
30,000 miles · Jan 13, 2020
Electronic Stability Control (esc)

SIGNALS ON THE CAR ARE ALWAYS INCORRECT AND THE WIRING FOR BLUETOOTH AND USB DOES NOT ALWAYS WORK

NHTSA ODI #11299095

58,000 miles · Feb 15, 2019
Electronic Stability Control (esc)Unknown Or OtherCrash

VARIOUS SOFTWARE CONTROL FEATURES TRANSIENTLY STOP WORKING. THE NAVIGATION SYSTEM HAS FAILED TO COME ON SEVERAL TIMES. THE KEY FOB STOPS WORKING AND THEN WORKS AGAIN.THE PROBLEMS ARE ALWAYS TRANSIENT AND THEN START WORKING AGAIN. THE WORST THING THAT HAPPENED WAS THE FRONT SENSOR FAILED TO WORK AND A SMALL POLE WAS HIT AND DID D…

Read full complaint

VARIOUS SOFTWARE CONTROL FEATURES TRANSIENTLY STOP WORKING. THE NAVIGATION SYSTEM HAS FAILED TO COME ON SEVERAL TIMES. THE KEY FOB STOPS WORKING AND THEN WORKS AGAIN.THE PROBLEMS ARE ALWAYS TRANSIENT AND THEN START WORKING AGAIN. THE WORST THING THAT HAPPENED WAS THE FRONT SENSOR FAILED TO WORK AND A SMALL POLE WAS HIT AND DID DAMAGE TO THE FRONT FENDER.

NHTSA ODI #11180236

Official recalls

1

17V546000 · Air Bags:sensor:occupant Classification; Seats; Steering:electric Power Assist System

Aug 31, 2017

Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.

Consequence & remedy

Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.

Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.

Additional source detail variants (3)

Air Bags:sensor:occupant Classification

Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.

Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.

Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.

Steering:electric Power Assist System

Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.

Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.

Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.

Seats

Mazda North American Operations (Mazda) is recalling certain 2016 Mazda6 vehicles. Debris from the welding process during manufacturing of the front passenger seat frame may damage the occupant classification system (OCS) wiring.

Consequence: If the wiring becomes damaged, there may be a loss of power steering assist and the deactivation of the passenger air bag, increasing the risk of a crash and the risk of injury in the event of a crash.

Remedy: Mazda will notify owners, and dealers will attach a protective pad on the seat frame. If the OCS harness is damaged, insulating tape will be applied to the harness. These repairs will be performed free of charge. The recall began October 26, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1517H.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

0

No exact-year investigations in this snapshot.