← New search

2010 Mazda MAZDA6

Owner reports · Recalls · Investigations

More warning signs than most MAZDA6 years

Owner complaints for the 2010 Mazda MAZDA6 are substantially higher than the model-year median of 105.

About this comparison →

When problems were reported

Mileage at the reported incident

139 reports with mileage · 86 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Structure. Review the 60 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Air Bags. Review the 54 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Suspension. Review the 43 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

5 crash reports2 fire reports2 injury reports

Exterior Lighting complaints

21 reports
Clear category filter
Mileage unknown · Aug 25, 2021
Electrical SystemExterior Lighting

I purchased this vehicle for my 16 yr old daughter 1 yr ago. The car has a clean carfax and has had no accidents. Upon purchasing the car the headlights continue to burn out. Taking it to a Mazda dealership i learned the headlight assembly unit was melting. I had to purchase 2 used headlight assembly because new from the deal…

Read full complaint

I purchased this vehicle for my 16 yr old daughter 1 yr ago. The car has a clean carfax and has had no accidents. Upon purchasing the car the headlights continue to burn out. Taking it to a Mazda dealership i learned the headlight assembly unit was melting. I had to purchase 2 used headlight assembly because new from the dealership are 1,000 a piece. 2 used but perfectly working headlights were installed and within a yr the headlights had burned out again. I went to change the bulbs only to learn the headlight assembly were once again burnt. I have to purchase 2 new headlight assembly again but the mechanic can not guarantee that this burning situation won't occur. After calling around to places to find headlight assembly I have come to find out many are burnt. This seems like a real problem considering you need headlights to drive at night. Spending 1,000 everytime my headlights burn out seems 100% unreasonable and the fact that there is cleary a wiring issue within the headlight assembly unit itself seems to be a problem. I have been on multiple forums and this is a common issue. Please fix the problem!!!!!!

NHTSA ODI #11430516

133,364 miles · Nov 4, 2020
Exterior Lighting

DRIVER AND PASSENGER SIDE HEADLIGHTS WENT OUT. IT'S NOT THE FUSE OR THE BULBS. THIS HAPPENED WHILE DRIVING AT NIGHT FORCING ME TO DRIVE OVER TWO HOURS ON BACK ROADS AND FREEWAY WITH MY HIGHBEAMS ON TO SEE.

NHTSA ODI #11373012

143,000 miles · May 21, 2020
Exterior Lighting

PASSENGER SIDE HEADLIGHT WENT OUT. IT'S NOT THE FUSE NOT THE BULB. THIS WAS WHILE DRIVING FORCING ME TO DRIVE WITH MY HIGHBEAMS ON SO I COULD SEE. *TR

NHTSA ODI #11325501

93,000 miles · Aug 6, 2019
Exterior Lighting

I BOUGHT A MAZDA 6 3 DAYS AGO AND I REPLACED THE HEADLIGHT BULB BECAUSE IT WASN'T WORKING. WHEN I OPENED THE COMPARTMENT I NOTICED THAT THE ENTIRE U IT WAS MELTING AND SMELLED VERY HOT. I HAD NO TURNED ON THE HEADLIGHTS AT THIS POINT AND I REMOVED THE BULB FROM THE ELECTRICAL UNIT. THIS COULD HAVE EASILY CAUGHT ON FIRE.

NHTSA ODI #11242153

125,000 miles · Feb 13, 2019
Exterior LightingUnknown Or Other

CAR SYSTEM ALARM GOES OFF WITHOUT NOTICE. IT WILL WORK FINE FOR DAYS THEN, THE ALARM WILL START TO GO OFF CONSTANTLY. WHILE DRIVING AT NIGHT, THE INTERIOR CAR LIGHTS COME ON LIKE A DOOR IS OPEN. NO INDICATOR ON CONTROL PANEL IF DOOR IS OPEN. THEN TURNS OFF LIGHTS INSIDE CAR. IT SCARES YOU AS YOU THINK A DOOR CAME OPEN

NHTSA ODI #11176675

75,000 miles · Jan 14, 2019
Air BagsExterior Lighting

HEADLIGHT ON BOTH SIDES GO OUT OFTEN. AFTER HAVING THIS ISSUE FAR TOO MANY TIMES, I LOOKED ONLINE HOPING TO FIND A SOLUTION AND DISCOVERED MULTIPLE MAZDA OWNERS ARE HAVING SAME PROBLEM. ITS A MALFUNCTION IN THE MAZDA THAT NEEDS TO BE FIXED BY MAZDA. THIS IS EXTREMELY DANGEROUS AT NIGHT TO HAVE HAPPENING WAY TO OFTEN. AS FOR T…

Read full complaint

HEADLIGHT ON BOTH SIDES GO OUT OFTEN. AFTER HAVING THIS ISSUE FAR TOO MANY TIMES, I LOOKED ONLINE HOPING TO FIND A SOLUTION AND DISCOVERED MULTIPLE MAZDA OWNERS ARE HAVING SAME PROBLEM. ITS A MALFUNCTION IN THE MAZDA THAT NEEDS TO BE FIXED BY MAZDA. THIS IS EXTREMELY DANGEROUS AT NIGHT TO HAVE HAPPENING WAY TO OFTEN. AS FOR THE AIR BAG- IVE HAD MY MAZDA TO A MAZDA DEALERSHIP FOR THE RECALLS AND THE AIR BAG WAS KNE OF THEM. SINCE THEN, TWICE NOW, THE 'AIRBAG/FRONT SEAT BELT PRETENSIONER SYSTEM MALFUNCTION' LIGHT IS FLASHING WHILE DRIVING. I LOOKED IT UP, AND BY THE SOUNDS OF IT, MY AIRBAG IS MALFUNCTIONING?! ANOTHER DANGEROUS SITUATION ON THE MAZDA 6.

NHTSA ODI #11170040

70,000 miles · Dec 15, 2018
Exterior Lighting

RIGHT FRONT HEADLAMP REPEATEDLY GOES OUT AND IT'S NEITHER THE BULB NOR THE FUSE! SUBSEQUENTLY STUCK DRIVING HOME WITH HIGH BEAMS (TO SEE WELL ENOUGH TO NAVIGATE SAFELY) BUT FEARFUL THE GLARE CREATES A SAFETY ISSUE FOR OPPOSING TRAFFIC - A TWOFER! NOTE; BANGING ON THE SIDE OF HEADLAMP ASSEMBLY WITH CLOSED FIST 'SOMETIMES' HAS …

Read full complaint

RIGHT FRONT HEADLAMP REPEATEDLY GOES OUT AND IT'S NEITHER THE BULB NOR THE FUSE! SUBSEQUENTLY STUCK DRIVING HOME WITH HIGH BEAMS (TO SEE WELL ENOUGH TO NAVIGATE SAFELY) BUT FEARFUL THE GLARE CREATES A SAFETY ISSUE FOR OPPOSING TRAFFIC - A TWOFER! NOTE; BANGING ON THE SIDE OF HEADLAMP ASSEMBLY WITH CLOSED FIST 'SOMETIMES' HAS IT COME BACK TO LIFE. LOOKED ONLINE AND - SURPRISE, SURPRISE - THERE ARE LOTS OF COMPLAINTS ABOUT THIS SAME THING! SADLY, I'M AFRAID SOMEONE'S GOING TO GET KILLED AND I JUST HOPE NOT TO BE INVOLVED. PLEASE READ WHAT OTHERS SAY ABOUT THIS HERE; HTTP://WWW.CARPROBLEMZOO.COM/MAZDA/MAZDA6/HEADLIGHTS-PROBLEMS.PHP . . . AND MANY MORE COMPLAINTS ON YOUTUBE

NHTSA ODI #11161696

160,000 miles · Jun 6, 2018
Exterior LightingFire

TL* THE CONTACT OWNS A 2010 MAZDA 6. AFTER BEING STOPPED BY A POLICE OFFICER, THE CONTACT WAS INFORMED THAT THE RED REFLECTOR LENS IN THE TAIL LAMPS WERE MISSING. UPON INSPECTING THE VEHICLE, THE CONTACT BECAME AWARE THAT THE TAIL LIGHT BULBS WERE EXTREMELY HOT, WHICH CAUSED THE REFLECTORS TO SEPARATE FROM THE TAIL LIGHT HOUSING…

Read full complaint

TL* THE CONTACT OWNS A 2010 MAZDA 6. AFTER BEING STOPPED BY A POLICE OFFICER, THE CONTACT WAS INFORMED THAT THE RED REFLECTOR LENS IN THE TAIL LAMPS WERE MISSING. UPON INSPECTING THE VEHICLE, THE CONTACT BECAME AWARE THAT THE TAIL LIGHT BULBS WERE EXTREMELY HOT, WHICH CAUSED THE REFLECTORS TO SEPARATE FROM THE TAIL LIGHT HOUSINGS. THE DEALER (MAZDA OF JACKSON, 5397 INTERSTATE 55 NORTH FRONTAGE RD, JACKSON, MS 39206, (601) 991-2222) WAS NOTIFIED OF THE FAILURE, BUT THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS ALSO NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 160,000.

NHTSA ODI #11100132

141,000 miles · Feb 25, 2018
Exterior Lighting

LOW BEAM INTERMITTENTLY TURNS OFF. SOMETIMES A FIRM SLAP ON THE HEADLIGHT IS A TEMPORARY RESOLUTION. I INITIALLY THOUGHT IT WAS THE BULB ITSELF, HAD IT REPLACED BUT THE PROBLEM CONTINUED. THERE ARE LOTS OF YOUTUBE VIDEOS ON THIS ISSUE. MAZDA KEEPS TELLING THAT THIS IS NOT A SAFETY ISSUE AND THEY REFUSE TO DO ANYTHING. IF THEY WA…

Read full complaint

LOW BEAM INTERMITTENTLY TURNS OFF. SOMETIMES A FIRM SLAP ON THE HEADLIGHT IS A TEMPORARY RESOLUTION. I INITIALLY THOUGHT IT WAS THE BULB ITSELF, HAD IT REPLACED BUT THE PROBLEM CONTINUED. THERE ARE LOTS OF YOUTUBE VIDEOS ON THIS ISSUE. MAZDA KEEPS TELLING THAT THIS IS NOT A SAFETY ISSUE AND THEY REFUSE TO DO ANYTHING. IF THEY WANT TO DO BUSINESS IN THE USA, THEY NEED TO BE SAFE OR THEY NEED TO GO BACK.

NHTSA ODI #11074726

32,000 miles · Jun 16, 2017
Exterior Lighting

CAR HAS 62,000 MILES ON IT AND LIGHTS HAVE BEEN REPLACED MINIMUM 6 TIMES SINCE CAR BOUGHT WITH 28K MILES. ACCESS TO BULBS REQUIRES MECHANIC TO REPAIR (GETTING UP BEHIND THE WHEEL WELL) AND COST CAN AVERAGES OVER $100 TO REPLACE. THERE IS 88 NHTSA COMPLAINTS ON THIS SAME SUBJECT. WHAT MUST WE ACCOMPLISHED TO HOLD MAZDA ACCOUNTABL…

Read full complaint

CAR HAS 62,000 MILES ON IT AND LIGHTS HAVE BEEN REPLACED MINIMUM 6 TIMES SINCE CAR BOUGHT WITH 28K MILES. ACCESS TO BULBS REQUIRES MECHANIC TO REPAIR (GETTING UP BEHIND THE WHEEL WELL) AND COST CAN AVERAGES OVER $100 TO REPLACE. THERE IS 88 NHTSA COMPLAINTS ON THIS SAME SUBJECT. WHAT MUST WE ACCOMPLISHED TO HOLD MAZDA ACCOUNTABLE?

NHTSA ODI #10995642

Official recalls

9

19V782000 · Air Bags:frontal:passenger Side:inflator Module

Oct 31, 2019

Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.

18V717000 · Air Bags:frontal:passenger Side:inflator Module

Oct 12, 2018

Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.

18V631000 · Structure; Suspension:front:control Arm

Sep 14, 2018

Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.

Consequence & remedy

Consequence: Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.

Remedy: Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

Additional source detail variants (2)

Structure

Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.

Consequence: Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.

Remedy: Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

Suspension:front:control Arm

Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.

Consequence: Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.

Remedy: Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

18V018000 · Air Bags:frontal:passenger Side:inflator Module

Jan 9, 2018

Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began March 2, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F.

17V429000 · Air Bags:frontal:passenger Side:inflator Module

Jun 29, 2017

Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.

16V594000 · Air Bags; Air Bags:frontal:sensor/control MODULE-INACTIVE

Aug 11, 2016

Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.

Consequence & remedy

Consequence: Failure of the ACU would illuminate the air bag warning light and prevent the air bags from deploying in the event of a crash, increasing the risk of injury.

Remedy: Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.

Additional source detail variants (2)

Air Bags:frontal:sensor/control MODULE-INACTIVE

Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.

Consequence: Failure of the ACU would illuminate the air bag warning light and prevent the air bags from deploying in the event of a crash, increasing the risk of injury.

Remedy: Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.

Air Bags

Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.

Consequence: Failure of the ACU would illuminate the air bag warning light and prevent the air bags from deploying in the event of a crash, increasing the risk of injury.

Remedy: Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.

14V114000 · Fuel System, Gasoline

Mar 11, 2014

Mazda North America Operations (Mazda) is recalling certain model year 2010-2012 Mazda6 vehicles manufactured September 14, 2009, through May 2, 2011, and equipped with 2.5L engine. In the affected vehicles, spiders may weave a web in the evaporative canister vent hose, blocking it and causing the fuel tank to have an excessive amount of negative pressure.

Consequence & remedy

Consequence: Negative pressure could cause the fuel tank to crack resulting in a fuel leak, increasing the risk of a fire.

Remedy: Mazda will notify owners, and dealers will reprogram the powertrain control module and inspect and clean the canister vent line. If a web was found in the line, the fuel tank and check valve on canister vent line will be replaced. These repairs will be done free of charge. The recall began on April 30, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number associated with this campaign is 7214C.

13V425000 · Latches/locks/linkages:doors:latch

Sep 24, 2013

Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.

Consequence & remedy

Consequence: If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.

Remedy: Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.

11V134000 · Fuel System, Gasoline:storage:tank Assembly

Feb 25, 2011

MAZDA IS RECALLING CERTAIN MODEL YEAR 2009-2010 MAZDA6 VEHICLES MANUFACTURED FROM APRIL 8, 2008, THROUGH FEBRUARY 8, 2010. A CERTAIN TYPE OF SPIDER MAY WEAVE A WEB IN THE EVAPORATIVE CANISTER VENT LINE AND THIS MAY CAUSE A RESTRICTION IN THE LINE. IF THIS OCCURS, THE FUEL TANK PRESSURE MAY BECOME EXCESSIVELY NEGATIVE WHEN THE EMISSION CONTROL SYSTEM WORKS TO PURGE THE VAPORS FROM THE CANISTER.

Consequence & remedy

Consequence: AS THE CANISTER IS PURGED REPEATEDLY DURING NORMAL OPERATION, THE STRESS ON THE FUEL TANK MAY EVENTUALLY RESULT IN A CRACK, POTENTIALLY LEADING TO FUEL LEAKAGE AD AN INCREASED RISK OF FIRE.

Remedy: DEALERS WILL INSPECT AND CLEAN UP THE CANISTER VENT LINE, AND INSTALL A SPRING TO PREVENT THIS TYPE OF SPIDER FROM ENTERING THE VENT LINE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE MARCH 25, 2011. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

PE18006 · Front Subframe Corrosion

Opened May 21, 2018 · Closed Nov 2, 2018

Status: closed (inferred from source dates) · Suspension; Suspension:front

In a letter dated September 14, 2018, Mazda North American Operations (Mazda) notified the National Highway Traffic Safety Administration (NHTSA) of a defect in the front subframe assemblies of model year (MY) 2009 through 2010 Mazda6 vehicles in certain states with high road salt use in winter months (Recall 18V-631). The recall covers approximately 48,814 vehicles that were sold or ever registered in the following states and District of Columbia:Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Mazda indicated that the recalled vehicles may have insufficient paint coating on the front cross member, which after continuous use in salt states may cause premature corrosion of the cross member. As the corrosion progresses over time, the structural integrity of the mounting point at the passenger side of the lower control arm may deteriorate and cause the steering alignment to change. If the steering alignment changes significantly while the vehicle is in motion this may increase the risk of a vehicle crash.ODI's analysis of complaints it has received from the public (VOQ's) and Mazda complaint data submitted in response to the information request letter for PE18-006 identified a total of 53 non-duplicative reports alleging incidents in which front cross-member corrosion had progressed to the stage of complete or partial separation of the subject steering or suspension components and another 98 reports alleging premature and/or excessive corrosion of the subject components with no separation. Mazda's recall will inspect the subframe and apply structural reinforcements, anti-corrosive wax and an AC drain tube free of charge. In cases of excessive corrosion, the subframe will be replaced free of charge.All 53 complaints alleging complete or partial separations involved vehicles that will be covered under Mazda's recall, resulting in a failure rate of 108.6 reports per 100,000 vehicles (R/100k) in the recalled population. When all complaints are analyzed by region, 150 involve vehicles included in Mazda's recall (307.3 R/100k) and just 1 involved a MY 2009 through 2010 Mazda6 vehicle not included in 18V-631 (2.8 R/100k). The field data indicate that Mazda's recall adequately covers vehicles with a risk of experiencing premature corrosion-related failure of the subject steering and suspension components in the subject vehicles. Based on Mazda's safety recall, this investigation is closed.The following VOQs allege loss or compromised steering control while vehicle was in motion:11115277, 11115790, 11128449, 10706604, 10846298, 10899584, 11019306, 11033821, 11048014, 11074634, 11078734, 11080014, 11083781, 11090944, 11091913, 11098279, 11101718, 11102209, 11102796, 11110606, 11110773, 11112830, 11113461, 11113963, 11114039, 11114567, 11114939, 11115303, 11119368, 11119423, 11121341, 11123997, 11124647, 11128648, 11128774, 11130281, 11132046, 11133295, 11133511, 11138829, 11139187, 11139486The following VOQs allege subframe corrosion detection prior to subframe failure:11141172, 11131161, 11129747, 11129349, 11129185, 11128591, 11128223, 11124644, 11122948, 11120047, 11119752, 11119362, 11118786, 11118242, 11115432, 11114568, 11114477, 11114061, 11105334, 11104096, 11103756, 11103724, 11101659, 11100420, 11099962, 11097874, 11084411, 11081783, 11034064, 11025276, 10956316Some VOQs have been omitted from this list due to duplicate VOQ submission between ODI records and Mazda records.

Additional source detail variants (2)

Suspension:front

In a letter dated September 14, 2018, Mazda North American Operations (Mazda) notified the National Highway Traffic Safety Administration (NHTSA) of a defect in the front subframe assemblies of model year (MY) 2009 through 2010 Mazda6 vehicles in certain states with high road salt use in winter months (Recall 18V-631). The recall covers approximately 48,814 vehicles that were sold or ever registered in the following states and District of Columbia:Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Mazda indicated that the recalled vehicles may have insufficient paint coating on the front cross member, which after continuous use in salt states may cause premature corrosion of the cross member. As the corrosion progresses over time, the structural integrity of the mounting point at the passenger side of the lower control arm may deteriorate and cause the steering alignment to change. If the steering alignment changes significantly while the vehicle is in motion this may increase the risk of a vehicle crash.ODI's analysis of complaints it has received from the public (VOQ's) and Mazda complaint data submitted in response to the information request letter for PE18-006 identified a total of 53 non-duplicative reports alleging incidents in which front cross-member corrosion had progressed to the stage of complete or partial separation of the subject steering or suspension components and another 98 reports alleging premature and/or excessive corrosion of the subject components with no separation. Mazda's recall will inspect the subframe and apply structural reinforcements, anti-corrosive wax and an AC drain tube free of charge. In cases of excessive corrosion, the subframe will be replaced free of charge.All 53 complaints alleging complete or partial separations involved vehicles that will be covered under Mazda's recall, resulting in a failure rate of 108.6 reports per 100,000 vehicles (R/100k) in the recalled population. When all complaints are analyzed by region, 150 involve vehicles included in Mazda's recall (307.3 R/100k) and just 1 involved a MY 2009 through 2010 Mazda6 vehicle not included in 18V-631 (2.8 R/100k). The field data indicate that Mazda's recall adequately covers vehicles with a risk of experiencing premature corrosion-related failure of the subject steering and suspension components in the subject vehicles. Based on Mazda's safety recall, this investigation is closed.The following VOQs allege loss or compromised steering control while vehicle was in motion:11115277, 11115790, 11128449, 10706604, 10846298, 10899584, 11019306, 11033821, 11048014, 11074634, 11078734, 11080014, 11083781, 11090944, 11091913, 11098279, 11101718, 11102209, 11102796, 11110606, 11110773, 11112830, 11113461, 11113963, 11114039, 11114567, 11114939, 11115303, 11119368, 11119423, 11121341, 11123997, 11124647, 11128648, 11128774, 11130281, 11132046, 11133295, 11133511, 11138829, 11139187, 11139486The following VOQs allege subframe corrosion detection prior to subframe failure:11141172, 11131161, 11129747, 11129349, 11129185, 11128591, 11128223, 11124644, 11122948, 11120047, 11119752, 11119362, 11118786, 11118242, 11115432, 11114568, 11114477, 11114061, 11105334, 11104096, 11103756, 11103724, 11101659, 11100420, 11099962, 11097874, 11084411, 11081783, 11034064, 11025276, 10956316Some VOQs have been omitted from this list due to duplicate VOQ submission between ODI records and Mazda records.

Suspension

In a letter dated September 14, 2018, Mazda North American Operations (Mazda) notified the National Highway Traffic Safety Administration (NHTSA) of a defect in the front subframe assemblies of model year (MY) 2009 through 2010 Mazda6 vehicles in certain states with high road salt use in winter months (Recall 18V-631). The recall covers approximately 48,814 vehicles that were sold or ever registered in the following states and District of Columbia:Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Mazda indicated that the recalled vehicles may have insufficient paint coating on the front cross member, which after continuous use in salt states may cause premature corrosion of the cross member. As the corrosion progresses over time, the structural integrity of the mounting point at the passenger side of the lower control arm may deteriorate and cause the steering alignment to change. If the steering alignment changes significantly while the vehicle is in motion this may increase the risk of a vehicle crash.ODI's analysis of complaints it has received from the public (VOQ's) and Mazda complaint data submitted in response to the information request letter for PE18-006 identified a total of 53 non-duplicative reports alleging incidents in which front cross-member corrosion had progressed to the stage of complete or partial separation of the subject steering or suspension components and another 98 reports alleging premature and/or excessive corrosion of the subject components with no separation. Mazda's recall will inspect the subframe and apply structural reinforcements, anti-corrosive wax and an AC drain tube free of charge. In cases of excessive corrosion, the subframe will be replaced free of charge.All 53 complaints alleging complete or partial separations involved vehicles that will be covered under Mazda's recall, resulting in a failure rate of 108.6 reports per 100,000 vehicles (R/100k) in the recalled population. When all complaints are analyzed by region, 150 involve vehicles included in Mazda's recall (307.3 R/100k) and just 1 involved a MY 2009 through 2010 Mazda6 vehicle not included in 18V-631 (2.8 R/100k). The field data indicate that Mazda's recall adequately covers vehicles with a risk of experiencing premature corrosion-related failure of the subject steering and suspension components in the subject vehicles. Based on Mazda's safety recall, this investigation is closed.The following VOQs allege loss or compromised steering control while vehicle was in motion:11115277, 11115790, 11128449, 10706604, 10846298, 10899584, 11019306, 11033821, 11048014, 11074634, 11078734, 11080014, 11083781, 11090944, 11091913, 11098279, 11101718, 11102209, 11102796, 11110606, 11110773, 11112830, 11113461, 11113963, 11114039, 11114567, 11114939, 11115303, 11119368, 11119423, 11121341, 11123997, 11124647, 11128648, 11128774, 11130281, 11132046, 11133295, 11133511, 11138829, 11139187, 11139486The following VOQs allege subframe corrosion detection prior to subframe failure:11141172, 11131161, 11129747, 11129349, 11129185, 11128591, 11128223, 11124644, 11122948, 11120047, 11119752, 11119362, 11118786, 11118242, 11115432, 11114568, 11114477, 11114061, 11105334, 11104096, 11103756, 11103724, 11101659, 11100420, 11099962, 11097874, 11084411, 11081783, 11034064, 11025276, 10956316Some VOQs have been omitted from this list due to duplicate VOQ submission between ODI records and Mazda records.