← New search

2009 Lexus Is 250

Owner reports · Recalls · Investigations

Similar to other model years

Owner complaints for the 2009 Lexus Is 250 do not stand out strongly from the model-year median of 35.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Is 250 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

24 reports with mileage · 24 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 20 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Vehicle Speed Control. Review the 6 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

3 crash reports0 fire reports1 injury reports

What owners actually said

48 reports
Mileage unknown · Aug 4, 2016
Air Bags

TL* TAKATA RECALL. THE CONTACT OWNS A 2009 LEXUS IS 250. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V340000 (AIR BAGS). THE PART TO DO THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE.…

Read full complaint

TL* TAKATA RECALL. THE CONTACT OWNS A 2009 LEXUS IS 250. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V340000 (AIR BAGS). THE PART TO DO THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

NHTSA ODI #10893170

Mileage unknown · Jul 19, 2016
Air Bags

TL* THE CONTACT OWNS A 2009 LEXUS IS 250. THE CONTACT STATED THAT THE NHTSA CAMPAIGN NUMBER: 16V340000 (AIR BAGS) HAD EXCEEDED A REASONABLE TIME FOR THE RECALL REPAIR. THE CONTACT WAS CONCERNED THAT THE VEHICLE WOULD EXPERIENCE THE FAILURE BEFORE PARTS BECOME AVAILABLE. THE MANUFACTURER WAS NOT CONTACTED. THE CONTACT DID NOT EXP…

Read full complaint

TL* THE CONTACT OWNS A 2009 LEXUS IS 250. THE CONTACT STATED THAT THE NHTSA CAMPAIGN NUMBER: 16V340000 (AIR BAGS) HAD EXCEEDED A REASONABLE TIME FOR THE RECALL REPAIR. THE CONTACT WAS CONCERNED THAT THE VEHICLE WOULD EXPERIENCE THE FAILURE BEFORE PARTS BECOME AVAILABLE. THE MANUFACTURER WAS NOT CONTACTED. THE CONTACT DID NOT EXPERIENCE THE FAILURE. THE VIN WAS NOT AVAILABLE. UPDATED 09/08/16*LJ *CN

NHTSA ODI #10885751

Mileage unknown · Jan 21, 2015
Structure

I HAVE A 2009 LEXUS IS 250 WITH A MELTING DASHBOARD AND PANELS THAT I HAD MY SERVICE ADVISOR CHECK AFTER INSPECTING IT HE TOOK PICTURES AND SENT IT TO LEXUS HEADQUARTERS AND TOLD ME TO WAIT 2 MONTHS FOR THERE REPLY AND ITS BEEN PAST 2 MONTHS ALREADY.SO AS OF JAN. 21, 2015 MY GIRLFRIEND TOLD ME THAT SHE HAS A HARD TIME DRIVING TH…

Read full complaint

I HAVE A 2009 LEXUS IS 250 WITH A MELTING DASHBOARD AND PANELS THAT I HAD MY SERVICE ADVISOR CHECK AFTER INSPECTING IT HE TOOK PICTURES AND SENT IT TO LEXUS HEADQUARTERS AND TOLD ME TO WAIT 2 MONTHS FOR THERE REPLY AND ITS BEEN PAST 2 MONTHS ALREADY.SO AS OF JAN. 21, 2015 MY GIRLFRIEND TOLD ME THAT SHE HAS A HARD TIME DRIVING THE CAR BECAUSE OF THE GLARE FROM THE DASHBOARD WHEN THE SUN HITS IT SO I MADE A CALL TO THE SERVICE ADVISOR TODAY JAN. 21, 2015 AND TOLD HIM THAT I NEVER HEARD BACK FOR MY DASHBOARD REPLACEMENT HE SAID IT TAKES AWHILE 3-4 MONTHS AND I EXPLAINED TO HIM ABOUT THE GLARE TO MY WINDSHIELD DUE TO THE MELTING DASHBOARD AND HE TELL ME ALL YOU CAN DO IS WAIT FOR THE RECALL THERE'S A RECALL GOING OUT FOR IT BUT I CANT WAIT FOR RECALL BECAUSE I HAVE MY GIRLFRIEND AND MY 2 KIDS AGES 9YRS OLD AND 1YRS OLD RIDE IN THE CAR AND THIS IS OUR ONLY VEHICLE THAT WE HAVE.PLEASE I NEED TO GET THIS FIX ASAP DON'T WANT NOTHING HAPPENING TO MY FAMILY THANKS IN ADVANCE MAHALO FROM HONOLULU,HAWAII EMAIL ME IF YOU HAVE ANY QUESTIONS [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

NHTSA ODI #10677113

45,000 miles · Dec 22, 2014
Visibility

WHILE STOPPED, HEARD A POP ON LEFT REAR WINDOW, GLASS SHATTERED AND STARTED FALLING INTO CAR LIKE A WATERFALL. *TR

NHTSA ODI #10667778

39,731 miles · Dec 12, 2014
Structure

THE DASHBOARD ON MY LEXUS IS-250 2009 HAS BEEN SLOWLY MELTING FOR SEVERAL YEARS LEAVING A SHINY AND WET LOOK AND FEEL. THIS SHINY AREA OF THE DASHBOARD IS DIRECTLY OVER THE DRIVERS VIEW AND REFLECTS ON THE UNDERSIDE OF THE WINDSHIELD. IN HEAVY OR DIRECT LIGHT (SAME AT NIGHT) THE REFLECTED LIGHT OBSCURES THE VIEW OUT ONTO THE ROA…

Read full complaint

THE DASHBOARD ON MY LEXUS IS-250 2009 HAS BEEN SLOWLY MELTING FOR SEVERAL YEARS LEAVING A SHINY AND WET LOOK AND FEEL. THIS SHINY AREA OF THE DASHBOARD IS DIRECTLY OVER THE DRIVERS VIEW AND REFLECTS ON THE UNDERSIDE OF THE WINDSHIELD. IN HEAVY OR DIRECT LIGHT (SAME AT NIGHT) THE REFLECTED LIGHT OBSCURES THE VIEW OUT ONTO THE ROADWAY. I BELIEVE IN THE RIGHT CIRCUMSTANCES A PEDESTRIAN OR ANOTHER CAR COULD POSSIBLY BE HIDDEN BY THE REFLECTED LIGHT FROM THE DASHBOARD. I CAN UPON YOUR REQUEST PROVIDE A VIDEO OF THE SURFACE AND THE LIGHT PROBLEMS WHILE DRIVING. *TR

NHTSA ODI #10664026

72,000 miles · Oct 17, 2014
Structure

THE DASHBOARD IS MELTING BECOMING SHINY AND STICKY. MAKES IT HARD TO SEE WHEN DRIVING IN THE SUN. *TR

NHTSA ODI #10648412

59,000 miles · Oct 14, 2014
Visibility

TL* THE CONTACT OWNS A 2009 LEXUS IS 250. WHILE DRIVING 60 MPH, THE SUNROOF GLASS SHATTERED WITHOUT WARNING. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED. THE APPROXIMATE FAILURE MILEAGE WAS 59,000.

NHTSA ODI #10644483

9,000 miles · May 29, 2013
Service Brakes, HydraulicVehicle Speed Control

TL* THE CONTACT OWNS A 2009 LEXUS IS250. THE CONTACT STATED THAT THE VEHICLE LUNGED AND THEN ACCELERATED INDEPENDENTLY. THE FAILURE WAS EXPERIENCED SEVERAL TIMES. ON ONE OCCASION, THE FAILURE OCCURRED IMMEDIATELY AFTER START-UP AND THE VEHICLE ACCELERATED INTO A NEIGHBOR'S DRIVEWAY. THE VEHICLE WAS TAKEN TO THE DEALER SEVERAL TI…

Read full complaint

TL* THE CONTACT OWNS A 2009 LEXUS IS250. THE CONTACT STATED THAT THE VEHICLE LUNGED AND THEN ACCELERATED INDEPENDENTLY. THE FAILURE WAS EXPERIENCED SEVERAL TIMES. ON ONE OCCASION, THE FAILURE OCCURRED IMMEDIATELY AFTER START-UP AND THE VEHICLE ACCELERATED INTO A NEIGHBOR'S DRIVEWAY. THE VEHICLE WAS TAKEN TO THE DEALER SEVERAL TIMES FOR THE FAILURE. A DIAGNOSTIC WAS PERFORMED, BUT THE DEALER WAS UNABLE TO DETERMINE THE FAILURE. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 9,000 AND THE CURRENT MILEAGE WAS 44,000. UPDATED 7/29/13 *CN THE CONSUMER STATED THE VEHICLE FAILED TO STOP AT A STOP SIGN, THEN LUNGED FORWARD ABOUT 10-12 FEET. THE BRAKES DID NOT WORK, EVEN THOUGH SHE PUSHED THE BRAKE TO THE FLOOR FOR SEVERAL MINUTES. FINALLY, THE VEHICLE STOPPED IN THE MIDDLE ON THE INTERSECTION.

NHTSA ODI #10514052

70,000 miles · Jul 14, 2011
Latches/locks/linkages

TL*THE CONTACT OWNS A 2009 LEXUS IS250. THE CONTACT STATED THAT THE VEHICLE WAS PARKED AND SHUT OFF WHEN SHE SHUT THE PASSENGER SIDE REAR DOOR AND ALL OF THE DOORS LOCKED. THE CONTACT ALSO STATED THAT THE KEY FOB WAS INSIDE OF THE VEHICLE WHEN THE FAILURE OCCURRED. IN ORDER TO RE-ENTER THE VEHICLE, THE CONTACT HAD TO LOCATE A SP…

Read full complaint

TL*THE CONTACT OWNS A 2009 LEXUS IS250. THE CONTACT STATED THAT THE VEHICLE WAS PARKED AND SHUT OFF WHEN SHE SHUT THE PASSENGER SIDE REAR DOOR AND ALL OF THE DOORS LOCKED. THE CONTACT ALSO STATED THAT THE KEY FOB WAS INSIDE OF THE VEHICLE WHEN THE FAILURE OCCURRED. IN ORDER TO RE-ENTER THE VEHICLE, THE CONTACT HAD TO LOCATE A SPARE KEY. THE VEHICLE WAS NOT YET TAKEN TO HAVE THE FAILURE DIAGNOSED OR REPAIRED. THE FAILURE AND CURRENT MILEAGES WERE 70,000. THE VIN WAS UNAVAILABLE.

NHTSA ODI #10412315

Mileage unknown · May 10, 2011
Fuel System, Gasoline

IN EARLY 2009 I TOOK OUT A LEASE ON A EARLY 2009 IS 250 LEXUS BLACK, AFTER FEW MONTHS IN OCTOBER AT FIRST INSTANCE I STARTED NOTICING FUEL ODOR INSIDE OF THE CAR, COMING THROUGH THE AIR VENT OF THE CAR, WHEN THE AIR FLOW BUTTON WAS ON THE SETTING WHICH THE AIR FROM OUTSIDE WOULD CIRCULATE WITHIN THE CAR, AND THIS SETTING WAS THE…

Read full complaint

IN EARLY 2009 I TOOK OUT A LEASE ON A EARLY 2009 IS 250 LEXUS BLACK, AFTER FEW MONTHS IN OCTOBER AT FIRST INSTANCE I STARTED NOTICING FUEL ODOR INSIDE OF THE CAR, COMING THROUGH THE AIR VENT OF THE CAR, WHEN THE AIR FLOW BUTTON WAS ON THE SETTING WHICH THE AIR FROM OUTSIDE WOULD CIRCULATE WITHIN THE CAR, AND THIS SETTING WAS THE DEFAULT SETTING WHEN YOU TURN THE CAR ON BUT AFTER I TOOK MY CAR TO THE LEXUS DEALERSHIP WHILE THE CAR WAS STILL UNDER MANUFACTURERS WARRANTY THEY TOLD ME THAT THE CAR WAS FINE AND I JUST HAD TO CHANGE TO THE AIR FLOW SETTING SO THAT ONLY THE AIR INSIDE CIRCULATE WITHIN THE CAR. I WAS UNPLEASED, UNTIL FEW TIMES THAT I COMPLAINT I DID NOT GET ANYWHERE AT THE DEALER SHIP UNTIL I RECEIVED THE RECALL NOTICE, WHICH IS A WEEK BEFORE MY LEASE IS UP. *TR

NHTSA ODI #10399945

Official recalls

6

19V741000 · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

Oct 17, 2019

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Additional source detail variants (2)

Air Bags:frontal:passenger Side:inflator Module

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Air Bags:frontal:driver Side:inflator Module

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

18V024000 · Air Bags:frontal:passenger Side:inflator Module

Jan 9, 2018

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2013 Scion xB, Toyota Corolla, Corolla Matrix, Sienna, 4Runner, Lexus IS250, IS350, IS250C, IS350C, IS-F, and GX460 vehicles sold, ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP (Saipan), and the U.S. VI or "Zone A." Toyota is also recalling certain 2010 Scion xB, Toyota Corolla, Corolla Matrix, Yaris, 4Runner, Lexus IS250, IS350, IS250C, IS350C, ES350, IS-F, GX460, and Pontiac Vibe vehicles sold, ever registered, in the states of AZ, AR, DE, DC, IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV or "Zone B." Toyota is also recalling certain 2009 Scion xB, Toyota Corolla, Corolla Matrix, Yaris, Lexus IS250, IS350, ES350, IS-F, and Pontiac Vibe vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify the Toyota, Scion and Lexus owners. General Motors will contact the Pontiac owners. Depending on the vehicle model, dealers will replace the front passenger air bag inflator, or replace the air bag assembly. The recall began on January 29, 2018. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. Toyota's numbers for this recall are "Zone A" Toyota: G0P, Lexus: GLG; "Zone B" Toyota: G0R, Lexus GLH; "Zone C" Toyota: H0A, and Lexus: HLA.

17V006000 · Air Bags:frontal:passenger Side:inflator Module

Jan 9, 2017

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2012 Toyota 4Runner, Corolla, Corolla Matrix, Sienna, Yaris, Scion xB, Lexus ES350, GX460, IS-F, IS250, IS350, IS250C, IS350C, and Lexus LFA vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Toyota is recalling certain 2009 Toyota Corolla, Corolla Matrix, Yaris, Yaris HB, Scion xB, Pontiac Vibe, Lexus, ES350, IS250, IS350, and IS-F vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Toyota is recalling certain 2006-2008 Lexus IS250 and IS350, 2007-2008 Lexus ES350, Toyota Yaris, Yaris HB, and 2008 Lexus IS-F and Scion xB vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy: Toyota will notify the Toyota, Scion and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on February 1, 2017. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), H0A (Toyota Zone C), GLG (Lexus Zone A), GLH (Lexus Zone B) and HLA (Lexus Zone C).

16V340000 · Air Bags:frontal:passenger Side:inflator Module

May 23, 2016

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2011 Scion xB and Lexus IS F, 2009-2011 Toyota Corolla and Corolla Matrix, 2006-2011 Toyota Yaris, Lexus IS250 and Lexus IS350, 2010-2011 Toyota 4Runner, Lexus IS250C, Lexus IS350C and Lexus GX460, 2011 Sienna, 2007-2011 Lexus ES350, and 2009-2010 Pontiac Vibe vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Toyota is recalling certain model year 2008 Scion xB and Lexus IS F, 2007-2008 Toyota Yaris, 2006-2008 Lexus IS250 and Lexus IS350 and 2007-2008 Lexus ES350 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy: Toyota will notify the Toyota and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on December 6, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for interim notification for this campaign are G1P (Toyota Zone A), G1R (Toyota Zone B), G2G (Lexus Zone A), and G2H (Lexus Zone B). Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), GLG (Lexus Zone A), and GLH (Lexus Zone B).

14V647000 · Fuel System, Gasoline:delivery:hoses, Lines/piping, And Fittings

Oct 15, 2014

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2007-2010 Lexus LS vehicles manufactured May 9, 2006, to July 20, 2010, 2006-2011 Lexus GS vehicles manufactured January 6, 2005, to September 10, 2010, and 2006-2011 Lexus IS vehicles manufactured August 30, 2005, to September 10, 2010. Due to anti-corrosion plating remnants, fuel may leak from where the fuel pressure sensor is attached to the fuel delivery pipe.

Consequence & remedy

Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.

Remedy: Toyota will notify owners, and dealers will clean and reseal the fuel pressure sensor mounting area, free of charge. The recall began March 3, 2015. Owners may contact Toyota customer service at 1-800-331-4331.

13V030000 · Visibility/wiper

Jan 30, 2013

Toyota is recalling certain model year 2006-2012 Lexus IS250 and IS350 vehicles manufactured August 23, 2005, through October 5, 2011; 2010-2012 Lexus IS250C and IS350C vehicles manufactured April 10, 2009, through October 6, 2011; and 2008-2011 Lexus IS-F vehicles manufactured December 14, 2007, through July 10, 2011. The nuts that fasten the wiper arms may be insufficiently torqued such that if the wiper arms are restricted by an external load, such as a buildup of heavy snow, one or both of the wipers may become inoperative.

Consequence & remedy

Consequence: Inoperative wipers could reduce driver visibility and increase the risk of a vehicle crash.

Remedy: Toyota will notify owners, and Lexus dealers will install new wiper arm nuts, free of charge. An interim letter was mailed to owners on April 4, 2013. Owners may contact Toyota at 1-800-331-4331.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.