2010 Lexus Hs

Car stops un-expectantly while driving, this caused the car to turn off and not be able to steer, then it turns back on without warning. This results in not being able to control the car. This resulted in being hit by three cars. It looks like Lexus listed a notice, however we did not receive it, and were not aware of the notice. Waring lamps did come on please see pictures.

A week ago I started hearing a clunking noise in the steering column. It would also clunk near the front left wheel when I turned steering wheel. I was told I need to replace the rack and pinion steering, tie rods, and steering shaft. This is a very expensive repair. My 2010 HS250h only has 98,000 miles. I have never-ever had to replace the rack and pinion steering in any car! (Nor has anyone I know.) I believe this is a serious safety issue, especially since there were no warning lights to alert me of this problem. I am totally shocked that this would happen in a LEXUS! There clearly must be a defect in the car. (Like there was with the brake booster pump that I had to replace a year ago.) Lexus needs to step up, acknowledge the defect, and reimburse.

I own a 2010 Lexus HS250H. the problem exists that every warning light associated with the braking, traction, and anti lock system is on. Anti-Lock Braking System (ABS), Traction Control System (TRAC), and Vehicle Stability Control System (VSC) The dealer said it was a faulty Brake de booster and said it was checked in 2010 and was fine. And to fix the system they need to replace the brake de-booster at a charge of $3000. Apparently, it is not fine, and requested them to comply with the recall and change the debooster, and they said no. Are they libel for the recall fix? Running Sequence Number: 96610 Campaign Number: 13V235000 Make: LEXUS Model: HS Year: 2010 and Running Sequence Number: 68016 Campaign Number: 10V039000 Make: LEXUS Model: HS Year: 2010

SAFETY RECALL GLK REAR LOWER SUSPENSION ARM No.1 CERTAIN 2010 MODEL YEAR HS250h was done previously in 2016 and epoxy was put on the lower control arms rendering the suspension not being able to be aligned by conventional means. The car is now out of alignment in the rear and cannot be adjusted due to the epoxy. Dealership states that once a recall is done it cannot be redone for free and it would be out of pocket. This service can only be done at certified dealership. The car pulls to the right and it swings, sways and drifts into corners and feels very unstable.

Taking left turn, heard a loud sound and complete loss of control of vehicle. Currently being inspected by Lexus dealership, although car was initially towed to dealership service center from which is was purchased. They mentioned lower control arm of rear suspension bolt was lost/missing and rear struts were shot and vehicle is unsafe to drive. I then paid for a second tow from dealership to Lexus dealership. No warning lights were lit except after total loss of control.

I have a 2010 HS 250h with 90,000 miles. Out of the blue, the brake actuator started activating every 10 seconds (and even runs for a while once car is shut off) and there is a noise coming from brake pedal area when depressed. Lexus had previously recalled some 2010 HS 250 cars for brake booster pump issues. My VIN was not part of the recall; I dreaded this day would come. Toyota/Lexus is well aware of the brake booster pump issues in their hybrids. Dealer confirmed the issue and now it will cost me $3500 to have a problem fixed that Lexus should have handled a long time ago. I've contacted Lexus corporate and they will not fix the car. I hope the NHTSA will look into all the complaints about this issue and 2010 HS 250h cars. Lexus needs to step up and issue another recall.

The previous recall on this issue is not completely resolved. The rear suspension on this model of Lexus was simply epoxied in place permanently. The recall "resolution" approved by NHTSA and implemented by Lexus does not allow for the common maintenance on the vehicle - namely, alignment. Therefore, inordinate and substantial tire wear occurs due to the inability to align the wheels. The only way to “align” the tires is to buy completely new suspension parts (approximately $900) which will then be permanently epoxied in place again. Instead of the normal alignment ($100) again in an expected maintenance period, the Lexus dealer requires entire replacement again. This recall was NOT repaired. This recall was permanently and unsafely epoxied in place without the possibility of alignment needed for safety. It is unsafe to drive a car that cannot be aligned properly. Tire failure is a real and present danger. My tires were excessively worn and could have blown out.

Recall for Rear Suspension arms. There was a recall on my car which was processed in Aug 2016 at 89k miles by previous owner. I purchased the car in Dec 2021-Jan 2022 at around 93-94k miles. This means the car was almost not used by previous owner for 5 years as the recall wasn't performed well Also, the label for "safety recall" is still on the entire rear suspension arms which proves the point. When i called the dealership, they mentioned they never ever leave the stickers ON after the recall is processed which is contradictory to the repairs done. This is a serious safety issue and Lexus is liable to fix this recall but they are asking me to pay for it. I do not have any extra money to keep spending just because of the recalls not processed correctly. It goes with the brand Lexus which i trusted to buy. Recall is not done correctly which is a FACT. After driving for few months and just around 3-4 k miles the new tires are completely destroyed. This is when my wife was doing on freeway this happened which is very scary and serious safety concern. Attaching the pictures and certificate of recall repairs, if you can help in this regards.