← New search

2008 Lexus ES350

Owner reports · Recalls · Investigations

More warning signs than most ES350 years

Owner complaints for the 2008 Lexus ES350 are substantially higher than the model-year median of 21.

About this comparison →

When problems were reported

Mileage at the reported incident

77 reports with mileage · 178 unknown

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Air Bags. Review the 170 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Vehicle Speed Control. Review the 39 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Structure. Review the 12 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

27 crash reports1 fire reports16 injury reports

Unknown Or Other complaints

11 reports
Clear category filter
Mileage unknown · May 17, 2019
Unknown Or Other

I RECENTLY JUST FOUND OUT THAT MY DASHBOARD MELT, AND STICKY. IF I'M DRIVING IN THE SUN , THE REFLECTION OF THE SUN CAUSED THE BLINDSPOT THAT I COULD NOT SEE. ALSO, THE STICKINESS IS CAUSING THE SMELL AND IT'S NOT HEALTHY.

NHTSA ODI #11208280

Mileage unknown · May 7, 2019
Unknown Or OtherCrash

THE DASHBOARD WAS MELTING, I CALLED THE LEXUS CORP TODAY AND FOUND OUT THAT THE WARRANTY HAS EXPIRED SINCE LAST YEAR BUT I JUST DISCOVERED THE PROBLEM LAST SUNDAY.

NHTSA ODI #11206120

137,000 miles · Apr 19, 2019
Unknown Or Other

TRUNK RELEASE BUTTON THAT ALLOWS TRUNK TO BE OPENED MELTED. NOT SURE WHAT CAUSED THE RUBBER BUTTON TO MELT AND RENDER THE RELEASE OF THE TRUNK INOPERABLE. CAR WAS NEVER SUBJECTED TO CHEMICALS OR UNDUE HEAT. SOMETHING CAUSED THE BUTTON TO MELT AFTER A PERIOD OF TIME. POSSIBLE FIRE HAZARD IF NOT REPLACED? THE CAR IS KEPT YEAR R…

Read full complaint

TRUNK RELEASE BUTTON THAT ALLOWS TRUNK TO BE OPENED MELTED. NOT SURE WHAT CAUSED THE RUBBER BUTTON TO MELT AND RENDER THE RELEASE OF THE TRUNK INOPERABLE. CAR WAS NEVER SUBJECTED TO CHEMICALS OR UNDUE HEAT. SOMETHING CAUSED THE BUTTON TO MELT AFTER A PERIOD OF TIME. POSSIBLE FIRE HAZARD IF NOT REPLACED? THE CAR IS KEPT YEAR ROUND IN NEW JERSEY AND IS SUBJECT TO SEASONAL CHANGES BUT NOT IN A YEAR ROUND HOT CLIMATE SUCH AS THE SOUTHERN STATES. THE SERVICE MANAGER REFUSED TO HELP WITH THE REPLACEMENT COST. THE MECHANIC THERE WHO LOOKED AT IT SAID HE SEES IT ALL THE TIME.

NHTSA ODI #11197383

121,000 miles · Nov 25, 2018
Unknown Or Other

DASHBOARD MELTING

NHTSA ODI #11153609

150,000 miles · Jun 2, 2018
Unknown Or OtherVisibility/wiper

THE TOP OF THE DASH IS STICKY, ALMOST LIKE IT'S MELTING, CAUSING A SHINY GLARE TO REFLECT OFF THE BASH AND WINDSHIELD MAKING IT DIFFICULT TO SEE, ESPECIALLY IN DIRECT SUNLIGHT. IVE OWNED THE CAR SINCE 2010 AND IT'S STEADILY WORSENED OVERTIME. IT BECAME AN IMMEDIATE SAFETY CONCERN BACK IN MARCH AS THE WEATHER BECAME WARMER.

NHTSA ODI #11099335

Mileage unknown · Dec 13, 2017
Unknown Or Other

MY DASH BOARD IS BAD N CAUSING VERY BAD VISION TO DRIVE.LEXUS STATE THEY ARE NOT GOING TO COVER THIS AT THIS POINT DUE TO MISSING THE DEAD LINE.I PURSCHASE THIS VEHICLE USED N KNEW NOTHING ABOUT THIS PROBLEM UNTIL INFORMED BY LEXUS SERVICE.

NHTSA ODI #11054605

123,000 miles · Aug 25, 2017
Unknown Or Other

THE PASSAGE WINDOW GLASS POP OUT AND FELT INSIDE. I TOOK IT TO THE DEAL AND THEY ARE CHARGING 850 TO FIX IT. VERY EXPENSIVE CAR A WINDOW FALLING OFF

NHTSA ODI #11019601

Mileage unknown · Mar 2, 2017
Unknown Or OtherInjury

I PURCHASED THE LEXUS 3/2016 AND I HAVE BEEN HAVING MEDICAL PROBLEMS FROM THE MOLD/MILDEW AND TOXIC ALUMINUM HYDROXIDE THAT WAS SPRAYED ON THE HVAC BY LEXUS TO KILL THE MOLD ISSUE. I HAVE BEEN GOING TO THE DOCTOR SINCE 7/2016 FOR ILLNESS THAT STARTED OUT WITH TIGHTENING OF THE THROAT AND TONGUE, FREQUENT URINATION AND VERY YELLO…

Read full complaint

I PURCHASED THE LEXUS 3/2016 AND I HAVE BEEN HAVING MEDICAL PROBLEMS FROM THE MOLD/MILDEW AND TOXIC ALUMINUM HYDROXIDE THAT WAS SPRAYED ON THE HVAC BY LEXUS TO KILL THE MOLD ISSUE. I HAVE BEEN GOING TO THE DOCTOR SINCE 7/2016 FOR ILLNESS THAT STARTED OUT WITH TIGHTENING OF THE THROAT AND TONGUE, FREQUENT URINATION AND VERY YELLOW, DIFFICULTY BREATHING, HIGH BLOOD PRESSURE 130/80 BEFORE I PURCHASED CAR MY BLOOD PRESSURE WAS 120/60, BLURRED VISION, METALLIC TASTE ON MY TONGUE AND BURNING SENSATION ON MY TONGUE THAT DOESN'T GO AWAY, DIZZINESS. I HAVE HAD THE CAR FOR LESS THAN A YEAR AND I STOPPED USING THE AIR BECAUSE IT IS A SAFETY ISSUE AND MY HEALTH IS AT STAKE. I HAVE KIDS WHO RIDE IN THE CAR FROM 5YEARS OF AGE TO 12 YEARS AND THERE HEALTH IS AFFECT TOO. THE MOLD PRODUCES A GAS OF MYCOTOXINS WHICH CAN BE TRAVEL TO MAJOR ORGANS LUNG, LIVER, AND BRAIN. THESE CARS NEED TO BE RECALLED AND LEXUS OF AUSTIN IN AUSTIN, TEXAS REFUSES TO DO ANYTHING ABOUT MY COMPLAINTS. DON'T LET SOMEONE DIE BEFORE THIS GET TAKEN SERIOUS. THERE ARE MANY REPORTS OF LEXUS/TOYOTA HVAC MOLD ISSUE. ITS NOT JUST THE MOLD THAT IS THE PROBLEM IT IS THE GAS (MYCOTOXINS) YOU ARE MADE TO DRINK EVERYTIME YOU ARE BEHIND THE WHEEL. I DIDN'T BUY THIS CAR TO HAVE MY HEALTH AND MY FAMILY HEALTH TO BE AFFECTED. LEXUS OF AUSTIN TOOK MY MONEY, AND TOOK MY HEALTH TOO. HEALTH ;LEL.E

NHTSA ODI #10958269

Mileage unknown · Jan 20, 2017
Unknown Or Other

MELTING DASHBOARD I HAVE BEEN ON THE LIST FOR MY VEHICLE'S DEFECTIVE DASHBOARD RECALL SINCE 9/2015. I ALSO COMPLETED THE IN STORE INSPECTION REQUIRED BY THE DEALERSHIP 10/2016. YEAR TO DATE, THE DASHBOARD HAS NOT BEEN REPLACED. IS LEXUS STILL HONORING THIS RECALL?

NHTSA ODI #10946703

Mileage unknown · Dec 15, 2016
Unknown Or Other

I PURCHASED MY LEXUS 2008 ES 350 ON MARCH 2016 FROM LEXUS OF AUSTIN.THE 2008 LEXUS ES 350 HVAC SYSTEM IS BLOWING MOLDY, MILDEW, AND ALUMINUM HYDROXIDE SMELLS INTO THE CAR. THE TOXIC COMBINATION IS MAKING ME SICK AND IS CAUSING TIGHTENING OF MY THROAT, TONGUE, REFLUX, AND STOMACH PROBLEMS. I HAD MY CAR TESTED FOR MOLD AND THIS I…

Read full complaint

I PURCHASED MY LEXUS 2008 ES 350 ON MARCH 2016 FROM LEXUS OF AUSTIN.THE 2008 LEXUS ES 350 HVAC SYSTEM IS BLOWING MOLDY, MILDEW, AND ALUMINUM HYDROXIDE SMELLS INTO THE CAR. THE TOXIC COMBINATION IS MAKING ME SICK AND IS CAUSING TIGHTENING OF MY THROAT, TONGUE, REFLUX, AND STOMACH PROBLEMS. I HAD MY CAR TESTED FOR MOLD AND THIS IS WHAT I FOUND.

NHTSA ODI #10935500

Official recalls

4

19V741000 · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

Oct 17, 2019

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence & remedy

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Additional source detail variants (2)

Air Bags:frontal:passenger Side:inflator Module

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

Air Bags:frontal:driver Side:inflator Module

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Consequence: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

17V006000 · Air Bags:frontal:passenger Side:inflator Module

Jan 9, 2017

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2012 Toyota 4Runner, Corolla, Corolla Matrix, Sienna, Yaris, Scion xB, Lexus ES350, GX460, IS-F, IS250, IS350, IS250C, IS350C, and Lexus LFA vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Toyota is recalling certain 2009 Toyota Corolla, Corolla Matrix, Yaris, Yaris HB, Scion xB, Pontiac Vibe, Lexus, ES350, IS250, IS350, and IS-F vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Toyota is recalling certain 2006-2008 Lexus IS250 and IS350, 2007-2008 Lexus ES350, Toyota Yaris, Yaris HB, and 2008 Lexus IS-F and Scion xB vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy: Toyota will notify the Toyota, Scion and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on February 1, 2017. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), H0A (Toyota Zone C), GLG (Lexus Zone A), GLH (Lexus Zone B) and HLA (Lexus Zone C).

16V340000 · Air Bags:frontal:passenger Side:inflator Module

May 23, 2016

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2011 Scion xB and Lexus IS F, 2009-2011 Toyota Corolla and Corolla Matrix, 2006-2011 Toyota Yaris, Lexus IS250 and Lexus IS350, 2010-2011 Toyota 4Runner, Lexus IS250C, Lexus IS350C and Lexus GX460, 2011 Sienna, 2007-2011 Lexus ES350, and 2009-2010 Pontiac Vibe vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Toyota is recalling certain model year 2008 Scion xB and Lexus IS F, 2007-2008 Toyota Yaris, 2006-2008 Lexus IS250 and Lexus IS350 and 2007-2008 Lexus ES350 vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Consequence & remedy

Consequence: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy: Toyota will notify the Toyota and Lexus owners. General Motors will contact the Pontiac owners. Depending on the model, dealers will replace the passenger frontal air bag inflator or the air bag assembly, free of charge. The recall began on December 6, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for interim notification for this campaign are G1P (Toyota Zone A), G1R (Toyota Zone B), G2G (Lexus Zone A), and G2H (Lexus Zone B). Toyota's numbers for final remedy for this campaign are G0P (Toyota Zone A), G0R (Toyota Zone B), GLG (Lexus Zone A), and GLH (Lexus Zone B).

09V388000 · Vehicle Speed Control:accelerator Pedal

Oct 5, 2009

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.

Consequence & remedy

Consequence: A STUCK OPEN ACCELERATOR PEDAL MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.

Remedy: TOYOTA FILED AN AMENDED DEFECT REPORT ON NOVEMBER 25, 2009, STATING THAT DEALERS WILL MODIFY THE ACCELERATOR PEDAL AND, ON CERTAIN VEHICLES, ALTER THE SHAPE OF THE FLOOR SURFACE UNDER THE PEDAL. THESE CHANGES ADDRESS THE RISK OF PEDAL ENTRAPMENT DUE TO INTERFERENCE WITH THE FLOOR MAT. REDESIGNED ACCELERATOR PEDALS WILL BECOME AVAILABLE BEGINNING IN APRIL 2010 AND DEALERS WILL REPLACE ANY MODIFIED PEDAL WITH THE NEW PEDAL IF DESIRED. ALSO, DEALERS WILL REPLACE ANY GENUINE TOYOTA OR LEXUS ALL-WEATHER FLOOR MATS WITH REDESIGNED ALL-WEATHER MATS, OR REPURCHASE THE PREVIOUS MATS FROM OWNERS WHO DO NOT WANT THE NEW ONES. ADDITIONALLY, SOFTWARE MODIFICATIONS WILL BE INSTALLED ON CAMRY, AVALON AND LEXUS ES 350, IS 350 AND IS 250 MODELS THAT WILL ENSURE THAT THE BRAKE OVERRIDES THE ACCELERATOR IN THE EVENT BOTH BRAKE AND ACCELERATOR PEDALS ARE APPLIED. TOYOTA WILL BEGIN MAILING LETTERS TO OWNERS ON DECEMBER 31, 2009. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331, LEXUS AT 1-800-255-3987.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

2

EA21002 · Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021 · No close date supplied

Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Additional source detail variants (2)

Air Bags:frontal:driver Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Air Bags:frontal:passenger Side:inflator Module

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

EA07010 · Unwanted Acceleration, Floor Mat

Opened Aug 8, 2007 · Closed Oct 11, 2007

Status: closed (inferred from source dates) · Vehicle Speed Control; Vehicle Speed Control:accelerator Pedal

THE DRIVER SIDE FLOOR MAT WILL NOT INTERFERE WITH THE THROTTLE PEDAL IF PROPERLY SECURED USING THE RETAINING HOOKS PROVIDED BY TOYOTA.HOWEVER, IF THE ALL WEATHER MAT IS UNSECURED AND MOVES FORWARD FROM ITS INTENDED POSITION IT CAN ENTRAP THE THROTTLE PEDAL AT THE FULLY OPEN POSITION AFTER IT HAS BEEN DEPRESSED.THIS CAN HAPPEN REGARDLESS OF WHETHER OR NOT ANOTHER MAT (CARPET) IS UNDERNEATH.WHEN THIS OCCURS, SOME OPERATORS REACT BY APPLYING THE BRAKE PEDAL MULTIPLE TIMES, DEPLETING THE BRAKING SYSTEM'S (VACUUM BASED) POWER ASSIST.STOPPING THE VEHICLE WITH UNASSISTED BRAKING WHILE THE THROTTLE IS FULLY OPEN REQUIRES SIGNIFICANT PEDAL FORCE, WHICH SOME OPERATORS DID NOT, OR WERE UNABLE TO, APPLY FOR THE REQUIRED DURATION.CONTINUED DRIVING IN THIS CONDITION RESULTS IN OVERHEATED BRAKES, WHICH FURTHER DIMINISHES THE BRAKING EFFECTIVENESS.SOME OPERATORS ATTEMPTED TO TURN THE VEHICLE OFF BY DEPRESSING THE ENGINE CONTROL BUTTON, HOWEVER THEY WERE UNAWARE THE BUTTON HAD TO BE DEPRESSED FOR THREE SECONDS TO STOP THE ENGINE WHEN THE VEHICLE IS IN MOTION; THIS FUNCTIONALITY WAS NOT EXPLAINED ADEQUATELY IN THE OWNER'S MANUAL.IN ODI INTERVIEWS, OWNER'S REPORTED THEY WERE UNAWARE THE ALL WEATHER MAT HAD THE POTENTIAL TO INTERFERE WITH THE THROTTLE PEDAL, ADVISING THAT THIS WAS NEVER PROPERLY EXPLAINED GIVEN THE SIGNIFICANT HAZARD IT REPRESENTED.OWNERS REPORTED SEVERAL EXPLANATIONS FOR WHY THE MAT WAS UNSECURED, INCLUDING THAT THE VEHICLE WAS DELIVERED IN THIS CONDITION (MOST COMMON REASON), OR THAT THEY HAD (UNWITTINGLY) INSTALLED THE MAT THEMSELVES, OR THAT ANOTHER PARTY, SUCH AS A CAR WASH ATTENDANT, HAD DISTURBED THE MAT WITHOUT THE OWNER'S KNOWLEDGE.ONE CONSUMER REPORTED THAT THEIR VEHICLE WAS DELIVERED WITHOUT THE RETAINING DEVICES INSTALLED.IN A SEPTEMBER 26, 2007 LETTER TO NHTSA, TOYOTA INDICATED THAT THEY WOULD CONDUCT A SAFETY RECALL TO REPLACE THE ALL WEATHER MAT WITH A REDESIGNED MAT.ACCORDING TO TOYOTA, THE NEW MAT DESIGN WILL REDUCE THE POTENTIAL FOR MAT INTERFERENCE WITH THE THROTTLE PEDAL.THE POPULATION NOTED ABOVE REPRESENTS THE NUMBER OF SUBJECT MATSTHAT HAVE BEEN SOLD IN THE UNITED STATES.SINCE TOYOTA CANNOT IDENTIFY WHICH VEHICLES MAY HAVE THE SUBJECT MATS, THEY WILL SEND A LETTER TO ALL REGISTERED OWNERS OF THE SUBJECT VEHICLES (ESTIMATED 750K) ADVISING THEM OF THE CONCERN AND REMEDY.A COPY OF THAT LETTER WILL BE POSTED TO NHTSA'S WEB SITE UNDER RECALL 07E-082; IT CONTAINS A DESCRIPTION OF THE CONDITION AND THE ACTIONS AN OPERATOR SHOULD TAKE IN THE EVENT THROTTLE ENTRAPMENT OCCURS WHILE DRIVING.THE FATALITY INCIDENT NOTED ABOVE OCCURRED IN JULY 2007 AND WAS INVESTIGATED BY NHTSA'S SPECIAL CRASH INVESTIGATIONS OFFICE.IT HAS NOT BEEN REPORTED ON A VEHICLE OWNER QUESTIONNAIRE.THE OPERATOR REPORTEDLY TRAVELLED AT SPEEDS IN EXCESS OF 100 MPH FOR AN ESTIMATED EIGHT MILES ON AN INTERSTATE IN CALIFORNIA BEFORE IT STRUCK TWO OTHER VEHICLES.ONE OF THE STRUCK VEHICLES AND THE SUBJECT VEHICLE CAUGHT FIRE.THE OCCUPANT OF THE STRUCK VEHICLE DID NOT EVACULATE AND DIED AT THE SCENE.THE SUBJECT VEHICLE DRIVER SUFFERED A BROKEN BONE.THE CALIFORNIA HIGHWAY PATROL IS INVESTIGATING THE INCIDENT ALSO.ODI DID NOT ISSUE AN INFORMATION REQUEST LETTER DURING THIS INVESTIGATION.THE TOYOTA REPORTS NOTED ABOVE WERE REPORTED DURING PRELIMINARY EVALUATION PE07-016 AND ARE CURRENT THROUGH APRIL 2007 FOR MY 2007 LEXUS ES350 ONLY.ODI DOES NOT HAVE FIELD EXPERIENCE DATA FROM TOYOTA FOR CAMRY VEHICLES.THROTTLE ENTRAPMENT DUE TO IMPROPERLY INSTALLED FLOOR MATS COULD BE A CONCERN IN ALL VEHICLES.THEREFORE, DRIVERS SHOULD ALWAYS ENSURE THEIR FLOOR MATS ARE PROPERLY AND SAFELY INSTALLED.THIS INCL

Additional source detail variants (2)

Vehicle Speed Control:accelerator Pedal

THE DRIVER SIDE FLOOR MAT WILL NOT INTERFERE WITH THE THROTTLE PEDAL IF PROPERLY SECURED USING THE RETAINING HOOKS PROVIDED BY TOYOTA.HOWEVER, IF THE ALL WEATHER MAT IS UNSECURED AND MOVES FORWARD FROM ITS INTENDED POSITION IT CAN ENTRAP THE THROTTLE PEDAL AT THE FULLY OPEN POSITION AFTER IT HAS BEEN DEPRESSED.THIS CAN HAPPEN REGARDLESS OF WHETHER OR NOT ANOTHER MAT (CARPET) IS UNDERNEATH.WHEN THIS OCCURS, SOME OPERATORS REACT BY APPLYING THE BRAKE PEDAL MULTIPLE TIMES, DEPLETING THE BRAKING SYSTEM'S (VACUUM BASED) POWER ASSIST.STOPPING THE VEHICLE WITH UNASSISTED BRAKING WHILE THE THROTTLE IS FULLY OPEN REQUIRES SIGNIFICANT PEDAL FORCE, WHICH SOME OPERATORS DID NOT, OR WERE UNABLE TO, APPLY FOR THE REQUIRED DURATION.CONTINUED DRIVING IN THIS CONDITION RESULTS IN OVERHEATED BRAKES, WHICH FURTHER DIMINISHES THE BRAKING EFFECTIVENESS.SOME OPERATORS ATTEMPTED TO TURN THE VEHICLE OFF BY DEPRESSING THE ENGINE CONTROL BUTTON, HOWEVER THEY WERE UNAWARE THE BUTTON HAD TO BE DEPRESSED FOR THREE SECONDS TO STOP THE ENGINE WHEN THE VEHICLE IS IN MOTION; THIS FUNCTIONALITY WAS NOT EXPLAINED ADEQUATELY IN THE OWNER'S MANUAL.IN ODI INTERVIEWS, OWNER'S REPORTED THEY WERE UNAWARE THE ALL WEATHER MAT HAD THE POTENTIAL TO INTERFERE WITH THE THROTTLE PEDAL, ADVISING THAT THIS WAS NEVER PROPERLY EXPLAINED GIVEN THE SIGNIFICANT HAZARD IT REPRESENTED.OWNERS REPORTED SEVERAL EXPLANATIONS FOR WHY THE MAT WAS UNSECURED, INCLUDING THAT THE VEHICLE WAS DELIVERED IN THIS CONDITION (MOST COMMON REASON), OR THAT THEY HAD (UNWITTINGLY) INSTALLED THE MAT THEMSELVES, OR THAT ANOTHER PARTY, SUCH AS A CAR WASH ATTENDANT, HAD DISTURBED THE MAT WITHOUT THE OWNER'S KNOWLEDGE.ONE CONSUMER REPORTED THAT THEIR VEHICLE WAS DELIVERED WITHOUT THE RETAINING DEVICES INSTALLED.IN A SEPTEMBER 26, 2007 LETTER TO NHTSA, TOYOTA INDICATED THAT THEY WOULD CONDUCT A SAFETY RECALL TO REPLACE THE ALL WEATHER MAT WITH A REDESIGNED MAT.ACCORDING TO TOYOTA, THE NEW MAT DESIGN WILL REDUCE THE POTENTIAL FOR MAT INTERFERENCE WITH THE THROTTLE PEDAL.THE POPULATION NOTED ABOVE REPRESENTS THE NUMBER OF SUBJECT MATSTHAT HAVE BEEN SOLD IN THE UNITED STATES.SINCE TOYOTA CANNOT IDENTIFY WHICH VEHICLES MAY HAVE THE SUBJECT MATS, THEY WILL SEND A LETTER TO ALL REGISTERED OWNERS OF THE SUBJECT VEHICLES (ESTIMATED 750K) ADVISING THEM OF THE CONCERN AND REMEDY.A COPY OF THAT LETTER WILL BE POSTED TO NHTSA'S WEB SITE UNDER RECALL 07E-082; IT CONTAINS A DESCRIPTION OF THE CONDITION AND THE ACTIONS AN OPERATOR SHOULD TAKE IN THE EVENT THROTTLE ENTRAPMENT OCCURS WHILE DRIVING.THE FATALITY INCIDENT NOTED ABOVE OCCURRED IN JULY 2007 AND WAS INVESTIGATED BY NHTSA'S SPECIAL CRASH INVESTIGATIONS OFFICE.IT HAS NOT BEEN REPORTED ON A VEHICLE OWNER QUESTIONNAIRE.THE OPERATOR REPORTEDLY TRAVELLED AT SPEEDS IN EXCESS OF 100 MPH FOR AN ESTIMATED EIGHT MILES ON AN INTERSTATE IN CALIFORNIA BEFORE IT STRUCK TWO OTHER VEHICLES.ONE OF THE STRUCK VEHICLES AND THE SUBJECT VEHICLE CAUGHT FIRE.THE OCCUPANT OF THE STRUCK VEHICLE DID NOT EVACULATE AND DIED AT THE SCENE.THE SUBJECT VEHICLE DRIVER SUFFERED A BROKEN BONE.THE CALIFORNIA HIGHWAY PATROL IS INVESTIGATING THE INCIDENT ALSO.ODI DID NOT ISSUE AN INFORMATION REQUEST LETTER DURING THIS INVESTIGATION.THE TOYOTA REPORTS NOTED ABOVE WERE REPORTED DURING PRELIMINARY EVALUATION PE07-016 AND ARE CURRENT THROUGH APRIL 2007 FOR MY 2007 LEXUS ES350 ONLY.ODI DOES NOT HAVE FIELD EXPERIENCE DATA FROM TOYOTA FOR CAMRY VEHICLES.THROTTLE ENTRAPMENT DUE TO IMPROPERLY INSTALLED FLOOR MATS COULD BE A CONCERN IN ALL VEHICLES.THEREFORE, DRIVERS SHOULD ALWAYS ENSURE THEIR FLOOR MATS ARE PROPERLY AND SAFELY INSTALLED.THIS INCL

Vehicle Speed Control

THE DRIVER SIDE FLOOR MAT WILL NOT INTERFERE WITH THE THROTTLE PEDAL IF PROPERLY SECURED USING THE RETAINING HOOKS PROVIDED BY TOYOTA.HOWEVER, IF THE ALL WEATHER MAT IS UNSECURED AND MOVES FORWARD FROM ITS INTENDED POSITION IT CAN ENTRAP THE THROTTLE PEDAL AT THE FULLY OPEN POSITION AFTER IT HAS BEEN DEPRESSED.THIS CAN HAPPEN REGARDLESS OF WHETHER OR NOT ANOTHER MAT (CARPET) IS UNDERNEATH.WHEN THIS OCCURS, SOME OPERATORS REACT BY APPLYING THE BRAKE PEDAL MULTIPLE TIMES, DEPLETING THE BRAKING SYSTEM'S (VACUUM BASED) POWER ASSIST.STOPPING THE VEHICLE WITH UNASSISTED BRAKING WHILE THE THROTTLE IS FULLY OPEN REQUIRES SIGNIFICANT PEDAL FORCE, WHICH SOME OPERATORS DID NOT, OR WERE UNABLE TO, APPLY FOR THE REQUIRED DURATION.CONTINUED DRIVING IN THIS CONDITION RESULTS IN OVERHEATED BRAKES, WHICH FURTHER DIMINISHES THE BRAKING EFFECTIVENESS.SOME OPERATORS ATTEMPTED TO TURN THE VEHICLE OFF BY DEPRESSING THE ENGINE CONTROL BUTTON, HOWEVER THEY WERE UNAWARE THE BUTTON HAD TO BE DEPRESSED FOR THREE SECONDS TO STOP THE ENGINE WHEN THE VEHICLE IS IN MOTION; THIS FUNCTIONALITY WAS NOT EXPLAINED ADEQUATELY IN THE OWNER'S MANUAL.IN ODI INTERVIEWS, OWNER'S REPORTED THEY WERE UNAWARE THE ALL WEATHER MAT HAD THE POTENTIAL TO INTERFERE WITH THE THROTTLE PEDAL, ADVISING THAT THIS WAS NEVER PROPERLY EXPLAINED GIVEN THE SIGNIFICANT HAZARD IT REPRESENTED.OWNERS REPORTED SEVERAL EXPLANATIONS FOR WHY THE MAT WAS UNSECURED, INCLUDING THAT THE VEHICLE WAS DELIVERED IN THIS CONDITION (MOST COMMON REASON), OR THAT THEY HAD (UNWITTINGLY) INSTALLED THE MAT THEMSELVES, OR THAT ANOTHER PARTY, SUCH AS A CAR WASH ATTENDANT, HAD DISTURBED THE MAT WITHOUT THE OWNER'S KNOWLEDGE.ONE CONSUMER REPORTED THAT THEIR VEHICLE WAS DELIVERED WITHOUT THE RETAINING DEVICES INSTALLED.IN A SEPTEMBER 26, 2007 LETTER TO NHTSA, TOYOTA INDICATED THAT THEY WOULD CONDUCT A SAFETY RECALL TO REPLACE THE ALL WEATHER MAT WITH A REDESIGNED MAT.ACCORDING TO TOYOTA, THE NEW MAT DESIGN WILL REDUCE THE POTENTIAL FOR MAT INTERFERENCE WITH THE THROTTLE PEDAL.THE POPULATION NOTED ABOVE REPRESENTS THE NUMBER OF SUBJECT MATSTHAT HAVE BEEN SOLD IN THE UNITED STATES.SINCE TOYOTA CANNOT IDENTIFY WHICH VEHICLES MAY HAVE THE SUBJECT MATS, THEY WILL SEND A LETTER TO ALL REGISTERED OWNERS OF THE SUBJECT VEHICLES (ESTIMATED 750K) ADVISING THEM OF THE CONCERN AND REMEDY.A COPY OF THAT LETTER WILL BE POSTED TO NHTSA'S WEB SITE UNDER RECALL 07E-082; IT CONTAINS A DESCRIPTION OF THE CONDITION AND THE ACTIONS AN OPERATOR SHOULD TAKE IN THE EVENT THROTTLE ENTRAPMENT OCCURS WHILE DRIVING.THE FATALITY INCIDENT NOTED ABOVE OCCURRED IN JULY 2007 AND WAS INVESTIGATED BY NHTSA'S SPECIAL CRASH INVESTIGATIONS OFFICE.IT HAS NOT BEEN REPORTED ON A VEHICLE OWNER QUESTIONNAIRE.THE OPERATOR REPORTEDLY TRAVELLED AT SPEEDS IN EXCESS OF 100 MPH FOR AN ESTIMATED EIGHT MILES ON AN INTERSTATE IN CALIFORNIA BEFORE IT STRUCK TWO OTHER VEHICLES.ONE OF THE STRUCK VEHICLES AND THE SUBJECT VEHICLE CAUGHT FIRE.THE OCCUPANT OF THE STRUCK VEHICLE DID NOT EVACULATE AND DIED AT THE SCENE.THE SUBJECT VEHICLE DRIVER SUFFERED A BROKEN BONE.THE CALIFORNIA HIGHWAY PATROL IS INVESTIGATING THE INCIDENT ALSO.ODI DID NOT ISSUE AN INFORMATION REQUEST LETTER DURING THIS INVESTIGATION.THE TOYOTA REPORTS NOTED ABOVE WERE REPORTED DURING PRELIMINARY EVALUATION PE07-016 AND ARE CURRENT THROUGH APRIL 2007 FOR MY 2007 LEXUS ES350 ONLY.ODI DOES NOT HAVE FIELD EXPERIENCE DATA FROM TOYOTA FOR CAMRY VEHICLES.THROTTLE ENTRAPMENT DUE TO IMPROPERLY INSTALLED FLOOR MATS COULD BE A CONCERN IN ALL VEHICLES.THEREFORE, DRIVERS SHOULD ALWAYS ENSURE THEIR FLOOR MATS ARE PROPERLY AND SAFELY INSTALLED.THIS INCL