IllustrationALWAYS CORRECTING STEERING, IT DRIFTS RIGHT TO LEFT AND BACK ON HIGHWAY. THEY REPLACE THE STABILIZER ABOUT A MONTH AGO. DID NOT HELP.
2019 Jeep Wrangler
Owner reports · Recalls · Investigations
More warning signs than most Wrangler years
Owner complaints for the 2019 Jeep Wrangler are substantially higher than the model-year median of 265.
About this comparison →How this year compares
Owner complaints by model year
Compare all Wrangler years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
3270–25K
3025–50K
1750–75K
975–100K
10100–150K
0150K+
393 reports with mileage · 344 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Steering. Review the 445 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 150 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Suspension. Review the 132 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
9 crash reports10 fire reports7 injury reports
Steering complaints
445 reportsSTEERING IS LOOSE AND CAR WONDERS OVER THE CENTER LINE. AT HIGHWAY SPEEDS IT IS UNSAFE. *TR
STEERING TRACKS TO THE RIGHT. IF DRIVING ON A HIGHWAY, I WOULD BE OFF THE ROAD IN A MATTER OF SECONDS. CONSTANTLY HAVING TO CORRECT THE STEERING BY HOLDING THE WHEEL AT 11 O'CLOCK. FCA REPLACED THE STABILIZER IN SEPTEMBER 2019. I PURCHASED THE VEHICLE IN DECEMBER 2019 FROM A JEEP DEALERSHIP. THERE A KNOWN PROBLEM, TRIED A "BAND-…
Read full complaint
STEERING TRACKS TO THE RIGHT. IF DRIVING ON A HIGHWAY, I WOULD BE OFF THE ROAD IN A MATTER OF SECONDS. CONSTANTLY HAVING TO CORRECT THE STEERING BY HOLDING THE WHEEL AT 11 O'CLOCK. FCA REPLACED THE STABILIZER IN SEPTEMBER 2019. I PURCHASED THE VEHICLE IN DECEMBER 2019 FROM A JEEP DEALERSHIP. THERE A KNOWN PROBLEM, TRIED A "BAND-AID" SOLUTION, AND PASSED ON THE PROBLEMS TO THE NEXT OWNER, ME. THE VEHICLE IS STILL UNDER WARRANTY AND THE DEALERSHIP WANTS ME TO PAY A DIAGNOSTIC FEE. THE VEHICLE HAS BEEN TO THEIR SERVICE DEPARTMENT TWICE. BOTH TIMES THE VEHICLE WAS NOT FIXED, NOW THE THIRD TIME, I AM ASKED TO PAY A DIAGNOSTIC FEE TO TRY TO SOLVE A PROBLEM THEY DID NOT FIX TWICE BEFORE. I CONTACTED FCA DIRECTLY AND THEY ARE IN COMMUNICATIONS WITH THE DEALERSHIP FOR ME. I AM FRUSTRATED BECAUSE THE VEHICLE IS NOT SAFE TO DRIVE. THIS IS A WELL DOCUMENTED ISSUE WITH JEEP BUT OWNERS ARE BEING DENIED SOLUTIONS. *TR
WHILE DRIVING AT 60 MPH OVER S SUSPENSION JOINT ON A BRIDGE, THE VEHICLE STARTED SHAKING VIOLENTLY AND WAS UNABLE TO CONTROL VEHICLE UNTIL THE SPEED DROPPED TO 35 MPH. I HAVE ALREADY HAD THE RECALL DONE TO THE VEHICLE TO REPLACE THE STABILIZER BAR, AND THE PROBLEM IS STILL CONTINUING TO OCCUR ANY TIME I TRAVEL OVER AN EXPANSION …
Read full complaint
WHILE DRIVING AT 60 MPH OVER S SUSPENSION JOINT ON A BRIDGE, THE VEHICLE STARTED SHAKING VIOLENTLY AND WAS UNABLE TO CONTROL VEHICLE UNTIL THE SPEED DROPPED TO 35 MPH. I HAVE ALREADY HAD THE RECALL DONE TO THE VEHICLE TO REPLACE THE STABILIZER BAR, AND THE PROBLEM IS STILL CONTINUING TO OCCUR ANY TIME I TRAVEL OVER AN EXPANSION JOINT OR EVEN A BUMP IN THE ROADWAY. *TR
LOOSE STEERING, MASSIVE AMOUNT OF PLAY IN THE WHEEL. DIFFICULT TO CONTROL VEHICLE AND KEEP LANE POSITION. EXCESSIVE DRIVER INPUT REQUIRED JUST TO GO STRAIGHT. UNSAFE DRIVING CONDITIONS. THE FASTER YOU GO, THE FASTER IT CAN CHANGE LANES ON YOU. AT 60+ MPH -IF YOU LOOK AWAY FROM THE ROAD FOR 2 SECONDS (CHECKING A SIDE MIRROR,…
Read full complaint
LOOSE STEERING, MASSIVE AMOUNT OF PLAY IN THE WHEEL. DIFFICULT TO CONTROL VEHICLE AND KEEP LANE POSITION. EXCESSIVE DRIVER INPUT REQUIRED JUST TO GO STRAIGHT. UNSAFE DRIVING CONDITIONS. THE FASTER YOU GO, THE FASTER IT CAN CHANGE LANES ON YOU. AT 60+ MPH -IF YOU LOOK AWAY FROM THE ROAD FOR 2 SECONDS (CHECKING A SIDE MIRROR, REAR VIEW MIRROR OR INTERSECTION) YOU COULD EASILY BE 4-6FT OVER TO THE LEFT OR RIGHT EVEN WHILE HOLDING THE WHEEL STRAIGHT.*DT CONSUMER STATED STEERING ISSUES HAVE BEEN RECURRING SINCE THE TIME OF PURCHASE.*JB
I HAVE BEEN TO DODGE SEVERAL TIMES FOR THESE ISSUES THEY ALWAYS TELL ME NOTHING WRONG WITH VEHICLE. THE CAR PULLS TO ONE SIDE WHEN DRIVING ITS VERY WOBBLY. ALSO I HAVE TAKEN IT IN BECAUSE THE JEEP IS USING UP COOLANT TOO FAST. THEY TOPPED OFF COOLANT FOR ME LESS THAN A WEEK LATER COOLANT RESERVOIR IS EMPTY. THEY TELL ME NOTHING …
Read full complaint
I HAVE BEEN TO DODGE SEVERAL TIMES FOR THESE ISSUES THEY ALWAYS TELL ME NOTHING WRONG WITH VEHICLE. THE CAR PULLS TO ONE SIDE WHEN DRIVING ITS VERY WOBBLY. ALSO I HAVE TAKEN IT IN BECAUSE THE JEEP IS USING UP COOLANT TOO FAST. THEY TOPPED OFF COOLANT FOR ME LESS THAN A WEEK LATER COOLANT RESERVOIR IS EMPTY. THEY TELL ME NOTHING WRONG NO ISSUE JUST KNOWN TO HAPPEN WITH JEEPS. *TR
WHILE DRIVE FOR 30 MINUTES THE JEEP HAS A COMPLETE MALFUNCTION WITH ALL ELECTRICAL COMPONENTS AND WAS UNABLE TO SHUT OFF ENGINE, AND ABS, POWER STEERING, GEAR SHIFTER, ELECTRICAL GAUGES, AUTO START STOP ENGINE SHUT OFF AND NAVIGATION SYSTEM. JEEP ONLY HAS 3800 MILES ON IT. MY FAMILY OF 5 WERE ALL IN THE VEHICLE ON THE FREEWAY W…
Read full complaint
WHILE DRIVE FOR 30 MINUTES THE JEEP HAS A COMPLETE MALFUNCTION WITH ALL ELECTRICAL COMPONENTS AND WAS UNABLE TO SHUT OFF ENGINE, AND ABS, POWER STEERING, GEAR SHIFTER, ELECTRICAL GAUGES, AUTO START STOP ENGINE SHUT OFF AND NAVIGATION SYSTEM. JEEP ONLY HAS 3800 MILES ON IT. MY FAMILY OF 5 WERE ALL IN THE VEHICLE ON THE FREEWAY WHEN THE JEEP ELECTRICAL SYSTEM STARTED SHUTTING OFF AND ON. WE PULLED INTO OUR STREET AND THE JEEP WOULD NOT SHIFT GEARS OR TURN OFF THE ENGINE. THIS PUT US IN AN UNSAFE POSITION NOT KNOW IF THE VEHICLE WAS GOING LOOSE CONTROL. I PULLED OVER BUT THE JEEP WOULD NOT SHIFT AND ENDED UP BLOCKING TRAFFIC. WE FELT UNSAFE AND ANY SPEED, VERY SCARY FOR OUR FAMILY. [XXX] DRIVER AND OWNER INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
AFTER RECEIVING THE RECALL FOR STEERING DAMPER TO FIX THE STEERING WHEEL WOBBLE WHEN DRIVING OVER A BUMP AT HIGHWAY SPEEDS, I HAVE GOTTEN THE WOBBLE TWICE NOW. RECALL WAS APPROX 5,131 MILES. WOBBLE INCIDENT OCCURRED ONCE BEFORE RECALL AT 3,000 MILES. WOBBLE HAS ALSO OCCURRED AT APPROX 5,500 MILES AND APPROX 5,800. IT IS A VI…
Read full complaint
AFTER RECEIVING THE RECALL FOR STEERING DAMPER TO FIX THE STEERING WHEEL WOBBLE WHEN DRIVING OVER A BUMP AT HIGHWAY SPEEDS, I HAVE GOTTEN THE WOBBLE TWICE NOW. RECALL WAS APPROX 5,131 MILES. WOBBLE INCIDENT OCCURRED ONCE BEFORE RECALL AT 3,000 MILES. WOBBLE HAS ALSO OCCURRED AT APPROX 5,500 MILES AND APPROX 5,800. IT IS A VIOLENT WOBBLE THAT MAKES ME UNCOMFORTABLE AND SUSCEPTIBLE TO AN ACCIDENT ESPECIALLY AT HIGHWAY SPEEDS WHILE DRIVING TO AND FROM WORK. *TR
THE VEHICLE HAS HAD A SLIGHT PULL SINCE DRIVING OFF THE LOT, BRAND NEW 37 MILES. IT WANDERS TO THE RIGHT SIDE OF THE ROAD. IF YOU HAVE TO DO A PANIC STEER IT IS ALMOST IMPOSSIBLE NOT TO LOOSE CONTROL AT FREEWAY SPEEDS. I HAVE REQUESTED AN ALIGNMENT AND BALANCE CHECK FROM THE DEALERSHIP. THE DEALERSHIP HAS TOLD ME THIS IS THE NE…
Read full complaint
THE VEHICLE HAS HAD A SLIGHT PULL SINCE DRIVING OFF THE LOT, BRAND NEW 37 MILES. IT WANDERS TO THE RIGHT SIDE OF THE ROAD. IF YOU HAVE TO DO A PANIC STEER IT IS ALMOST IMPOSSIBLE NOT TO LOOSE CONTROL AT FREEWAY SPEEDS. I HAVE REQUESTED AN ALIGNMENT AND BALANCE CHECK FROM THE DEALERSHIP. THE DEALERSHIP HAS TOLD ME THIS IS THE NEW 'NORMAL' FOR THE WRANGLERS. I DO NOT THINK IT IS TOO MUCH TO ASK FOR A BRAND NEW, $53,000.00 VEHICLE TO DRIVE IN A STRAIGHT LINE WITHOUT CONSTANT STEERING INPUT OR BE ABLE TO PASS WITHOUT FEAR OF LOOSING CONTROL. ESPECIALLY NEW WITH NOW 1,500 MILES ON IT.
THE VEHICLE HAS HAD A SLIGHT PULL TO THE RIGHT SINCE DRIVING OFF THE LOT BRAND NEW. I WAS TOLD TO LET THE SUSPENSION SETTLE BEFORE BRINGING IT FOR AN ALIGNMENT. I'VE TAKEN IT TO THE DEALER 3 TIMES NOW AN HAVE LESS THEN 5000 MILES ON IT. I'VE BEEN TOLD THAT THE ALIGNMENT IS WITHIN SPECIFICATIONS AND THAT ALL JEEP WRANGLERS HA…
Read full complaint
THE VEHICLE HAS HAD A SLIGHT PULL TO THE RIGHT SINCE DRIVING OFF THE LOT BRAND NEW. I WAS TOLD TO LET THE SUSPENSION SETTLE BEFORE BRINGING IT FOR AN ALIGNMENT. I'VE TAKEN IT TO THE DEALER 3 TIMES NOW AN HAVE LESS THEN 5000 MILES ON IT. I'VE BEEN TOLD THAT THE ALIGNMENT IS WITHIN SPECIFICATIONS AND THAT ALL JEEP WRANGLERS HAVE A PULL TO ONE SIDE OR THE OTHER. THE DEALERSHIP AS TOLD MED THAT IT'S NORMAL FOR A WRANGLER NOT TO GO IN A STRAIGHT LINE AND IN THEIR EXPERIENCE, THIS IS AS GOOD AS IT GETS. I DON'T THINK IT'S TOO MUCH TO ASK THAT A BRAND NEW VEHICLE DRIVE IN A STRAIGHT LINE.
Official recalls
924V676000 · Back Over Prevention: Sensing System: Camera; Exterior Lighting:brake Lights
Sep 12, 2024
Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.
Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.
Additional source detail variants (2)
Back Over Prevention: Sensing System: Camera
Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.
Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.
Exterior Lighting:brake Lights
Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.
Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.
24V652000 · Electrical System: Instrument Cluster/panel
Sep 5, 2024
Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
Consequence & remedy
Consequence: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.
Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.
23V116000 · Power Train:clutch Assembly
Feb 23, 2023
Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence & remedy
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
21V028000 · Power Train:clutch Assembly
Jan 28, 2021
Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence & remedy
Consequence: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
20V580000 · Seat Belts; Seat Belts:front:retractor
Sep 24, 2020
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence & remedy
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Additional source detail variants (2)
Seat Belts:front:retractor
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
Seat Belts
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
Consequence: In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
Remedy: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
20V191000 · Back Over Prevention: Sensing System: Camera
Sep 10, 2020
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Consequence & remedy
Consequence: The lingering rearview image can distract the driver, increasing the risk of a crash.
Remedy: Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
20V124000 · Power Train:clutch Assembly
Mar 3, 2020
Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
Consequence & remedy
Consequence: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
19V201000 · Steering
Mar 14, 2019
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.
Consequence & remedy
Consequence: If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.
Remedy: Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge. The recall began April 5, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V29.
18V675000 · Structure:frame And Members
Sep 28, 2018
Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.
Consequence & remedy
Consequence: An unexpected reduction in steering ability, can increase the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2PE19012 · Frame Weld Deficiencies
Opened Sep 16, 2019 · Closed Oct 29, 2023
Status: closed (inferred from source dates) · Steering; Structure:frame And Members
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance.NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Steering
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance.NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Structure:frame And Members
On September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance.NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
DP18004 · Frame Weld Deficiencies
Opened Nov 16, 2018 · Closed Sep 17, 2019
Status: closed (inferred from source dates) · Steering; Structure:frame And Members
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld deficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detachments that were outside of the scope of NHTSA Recall No. 18V-675. Additionally, the information that FCA provided did not adequately address whether frame weld quality deficiencies compromise the structural integrity of vehicles, and therefore may pose an unreasonable risk to motor vehicle safety. Finally, ODI needs to further evaluate the alleged steering-related defects reported through MY 2019 and the alleged defects' relation to weld quality.The petition was granted on September 16, 2019. Preliminary Evaluation PE19-012 has been opened to further assess the scope, frequency, and potential safety-related consequences of alleged weld quality deficiencies and steering related concerns on the MY 2018-2019 'JL' Jeep Wrangler vehicles.The ODI reports cited above can be viewed on NHTSA.gov under the following reference numbers:11234967, 11222390, 11219370, 11217080, 1204905, 11179954, 11171786, 11161243, 11155523, 11153044, 11143617, 11142722, 11142426, 11141336, 11141035, 11140637, 11140344, 11140262, 11140085, 11140057, 11139880, 11139866, 11139557, 11139467, 11139436, 11138974, 11138758, 11138757, 11132030, 11129738, 11129667, 11124312, 11120232, 11119676, 11119650, 11119454, 11119450, 11115658, 11115137, 11113029, 11112515, 11110583, 11109903, 11093172, 11088501, 11076098
Additional source detail variants (2)
Steering
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld deficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detachments that were outside of the scope of NHTSA Recall No. 18V-675. Additionally, the information that FCA provided did not adequately address whether frame weld quality deficiencies compromise the structural integrity of vehicles, and therefore may pose an unreasonable risk to motor vehicle safety. Finally, ODI needs to further evaluate the alleged steering-related defects reported through MY 2019 and the alleged defects' relation to weld quality.The petition was granted on September 16, 2019. Preliminary Evaluation PE19-012 has been opened to further assess the scope, frequency, and potential safety-related consequences of alleged weld quality deficiencies and steering related concerns on the MY 2018-2019 'JL' Jeep Wrangler vehicles.The ODI reports cited above can be viewed on NHTSA.gov under the following reference numbers:11234967, 11222390, 11219370, 11217080, 1204905, 11179954, 11171786, 11161243, 11155523, 11153044, 11143617, 11142722, 11142426, 11141336, 11141035, 11140637, 11140344, 11140262, 11140085, 11140057, 11139880, 11139866, 11139557, 11139467, 11139436, 11138974, 11138758, 11138757, 11132030, 11129738, 11129667, 11124312, 11120232, 11119676, 11119650, 11119454, 11119450, 11115658, 11115137, 11113029, 11112515, 11110583, 11109903, 11093172, 11088501, 11076098
Structure:frame And Members
In a letter received on October 24, 2018, a citizen petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into frame weld deficiencies on model year (MY) 2018 'JL' Jeep Wrangler vehicles. The petitioner described a broad list of frame weld deficiencies, including porous welds, excessive slag, lack of weld penetration, over penetration of welds, overweld or weld drip, and weld splash. The weld defects are allegedly located at a variety of locations on the frame assembly.On November 16, 2018, the Office of Defects Investigation (ODI) opened a Defect Petition (DP18-004) to evaluate whether to grant or deny the petition. On March 8, 2019, ODI sent an Information Request letter to Fiat Chrysler Automobiles (FCA) requesting information on frame weld related issues on all MY 2018-2019 Jeep Wrangler 'JL' vehicles. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI opted to include a request for additional information concerning reports of steering shimmy or wobble, loose steering, and steering lockup in the March request letter. ODI has performed a preliminary analysis on the information obtained from FCA. Based on ODI's review of the applicable materials, NHTSA has decided to grant the petition. While reviewing the applicable materials obtained from the manufacturer, ODI identified various reports and references to frame welded component detachments that were outside of the scope of NHTSA Recall No. 18V-675. Additionally, the information that FCA provided did not adequately address whether frame weld quality deficiencies compromise the structural integrity of vehicles, and therefore may pose an unreasonable risk to motor vehicle safety. Finally, ODI needs to further evaluate the alleged steering-related defects reported through MY 2019 and the alleged defects' relation to weld quality.The petition was granted on September 16, 2019. Preliminary Evaluation PE19-012 has been opened to further assess the scope, frequency, and potential safety-related consequences of alleged weld quality deficiencies and steering related concerns on the MY 2018-2019 'JL' Jeep Wrangler vehicles.The ODI reports cited above can be viewed on NHTSA.gov under the following reference numbers:11234967, 11222390, 11219370, 11217080, 1204905, 11179954, 11171786, 11161243, 11155523, 11153044, 11143617, 11142722, 11142426, 11141336, 11141035, 11140637, 11140344, 11140262, 11140085, 11140057, 11139880, 11139866, 11139557, 11139467, 11139436, 11138974, 11138758, 11138757, 11132030, 11129738, 11129667, 11124312, 11120232, 11119676, 11119650, 11119454, 11119450, 11115658, 11115137, 11113029, 11112515, 11110583, 11109903, 11093172, 11088501, 11076098