2021 Jeep Grand Cherokee L

The contact owns a 2021 Jeep Grand Cherokee L. The vehicle was included in NHTSA Campaign Number: 24V436000 (Back Over Prevention); and was taken to the dealer to update the radio software. The contact stated that after the recall repair was performed, the Forward Collision Avoidance activation button was no longer displayed on the infotainment center. The Forward Collision Avoidance Off warning light was illuminated on the instrument panel. The contact informed the dealer, who was unable to determine the cause of the failure. The dealer advised the contact to wait for a day; however, the failure persisted after the system reset. The manufacturer was not informed of the failure. The failure mileage was 18,000.

The vehicle didn’t automatic update of its “UCONNECT” system without warning after stopping at a gas station. Once the vehicle was turned back on after the update was completed there was a light on my dashboard signaling that the forward collision warning system is off. Some other things happened as well such as all my settings were reverted back to factory settings, and the menu screen was in Italian. After online research, it seems that this is a very common problem with the specific model. I was able to revert everything except for the Ford Collision , warning, which still states that it is OFF, after the update. After communicating all this information with Jeep, they want me to pay for a repair that was due to their system update.

ABS , Traction Control, Power brake booster, AEB inoperative after routine brake pads/rotor service. Vehicle was put into service mode via touch screen radio, rear brake service performed. Upon initial brake pedal application, required to exit service mode for rear brakes, to return caliper piston contact to brake pad. The vehicle disables abs and supporting system and sets codes c0050 , c2227 . As a technician my opinion is the extra brake fluid required to take up open space after service is discharged via accumulator into the brake system with no resistance or pressure due to caliper pistons expanding to the brake pads. These faults render the power brake boost abs and multiple other safety systems inoperative until a dealer level scan tool can perform abs initialization, and a hydraulic prove out test, and clear all codes, even with all code cleared power brake boost was lack just at best on initial test drive after service. A basic routine service should not affect a vehicle as adversely as this. While dealers may know what's going on your independently run shops and DIYers may return unsafe vehicles to customers/owners. This is the 3rd vehicle I have personally experienced this with. I will up load separate reports with those vins accordingly.

While driving my kids home from the school the vehicle stark jerking and kicking in the back while I was accelerating. Then the vehicle stopped shifting gears. I pulled to the side of the road turned off the car, turned it back on and it worked fine. I have this incident twice in two years. Secondly the paddle shift gear showed as disabled when I want to use manual gear. Checked the dashboard and there is no option saying enabled or disable peddle Shift gear. Thirdly the forward collision warning light is on on the dashboard. From time to Time the vehicle stops abruptly.

Jeep recently pushed an update through the vehicle over the air. Since the update the forward collision disable warning light has been illuminated on the front cluster. All attempts to correct the issue have rendered useless. The update has caused the safety feature of the front collision warning (sound and/or breaking) inoperable.

December 2021 about 2 months after purchasing, traction control, power steering light would intermittently turn on as well as the radio screen would flash black. All of these were separate problems and were not ways necessarily present when another light was on but they did occasionally all happen at the same time. Periodically, not every time when the light came there was the inability to turn the wheel. The length of time the light of inability to turn the wheel would vary sometimes the light would go away after turning the vehicle off and turning it back on while other times it was days. By the time a shop is able to get it in to be looked at the lights were off and not able to be recreated. It was at the dealership for a while and was told I could bring it home. I had concerns the and voiced them that although the light isn’t on now, what if it does turn on and I can’t turn the steering wheel while driving? It couldn’t be fixed if they didn’t know what was causing it. Eventually an ‘update’ was done and supposed to have fixed the problem. The radio still flashes a black screen periodically, the lights didn’t come on as frequent and the inability to turn the wheel went away. Until recently December 2024 intermittent lights that come on but do not stay on, check engine light, electric power steering, front collision (off) and traction control. These lights have come on intermittently but do not stay on. I have had times where I was unable to turn the wheel, luckily not on the road, the vehicle has lost traction while driving in the snow over the winter and has occasionally felt like the vehicle was ‘chugging’ down the road. Now the symptoms are not present every time a light turns on sometimes it runs fine. The length of time the lights stay on vary and again by the time I can get an appt the lights are off and the lights do not always come on at the same time as another. So the issue occurring with hardly any miles and no again with about 50k mils.

The forward collision warning light came on and will not go off. I have had the sensors tested for recalibration and the test showed that the sensors are working. Light is still on. MOPAR is aware of this issue as there are dozens of complaints in online forums and a STAR online publication has been published by MOPAR Case number:S2108000249